Kids & Kiosk Mode, coming back [testers needed!]

darknior

@zigurana I don't try it again, but last time i try it it works fine.
I will try your last beta to see.

This crash is an other problem.

Zigurana

@darknior yes, please try it, I am hoping that it will not regress your issue, but there is only one way to be sure ;-).

Regarding your crashes, I suspect it has nothing to do with the topic of this thread, but likely something with video playback. So I'd suggest to start a new thread on this, as it seems a serious issue.

pjft

I can say I've never seen such a crash dump in EmulationStation, which may point to faulty media (SD card or USB drive). I imagine that if you try it with your previously working binary you will run into the same thing.

Still, some more investigation can only help: is it the same video all the time, etc?

Thanks.

darknior

@Zigurana I have try your last build, emulationstation-dev, to try my x360 controller game-pad. And :

x360 gamepad not working
8bitDo NES not working
8bitDo NES PRO not working
8bitDo SNES is the only one working fine for me.

Zigurana

@darknior what in the name of all that's retro?!

To be sure: this is on the zigurana / UIModeController branch?

Would you have the logging from each of those controllers available?

darknior

@zigurana said in Kids & Kiosk Mode, coming back [testers needed!]:

@darknior what in the name of all that's retro?!

deviceName="Xbox 360 Wireless Receiver (XBOX)"
deviceName="8Bitdo SFC30 GamePad" deviceGUID="05000000102800000900000000010000"
deviceName="Xbox 360 Wireless Receiver" deviceGUID="030000005e040000a102000000010000"
deviceName="8Bitdo NES30 Pro" deviceGUID="05000000c82d00002038000000010000"
deviceName="8Bitdo NES30 GamePad" deviceGUID="05000000c82d00002028000000010000"

To be sure: this is on the zigurana / UIModeController branch?

I write i use the emulationstation-dev from Retropie-Setup.

Would you have the logging from each of those controllers available?

??? What do you want ?

Zigurana

@darknior Sorry, maybe a bit cryptic :-?
What I meant to say: "Huh I do not understand these results you are getting, we need to make sure you are testing the correct thing. And then we need to figure out what the hell is going on"

Please test these branches using the testing scripts. You will need to select this :
repository: zigurana/emulationstation
branch: UIModeInputHandling

Regarding logging, i meant the logged values for inputs for each of the controllers, I've updated the logging again to hopefully show me all I need to know.

Sorry for the confusion, and to burden you so much, but you seem to be one of the few people who have such a wide range of controllers available. (With great power comes great responsibility ;-))

You are doing good work, please keep it up!

Krahs

When do you expect we could have available these changes in official repo?

EctoOne

@dvf00 probably when the most issues are fixed. I mean that's why the developer branch was created recently, some older official releases weren't as stable as they should've been.

Zigurana

@darknior did you see my request for some more tests?

@zigurana said in Kids & Kiosk Mode, coming back [testers needed!]

darknior

@zigurana said in Kids & Kiosk Mode, coming back [testers needed!]:

@darknior did you see my request for some more tests?

Where do you log the command ? Where is the log file please ?
Thanks

Zigurana

@darknior
You can run EmulationStation with the debug flag by typing emulationstation --debug on the command line. The logfile will be at home/pi/.emulationstation/es-log.txt.
Hope that helps!

darknior

Ok i have think you add it by default ....
Test result :

repository: zigurana/emulationstation
branch: UIModeInputHandling

Result for x360 Receiver Game-pad controller : Working before and not working Now :(

lvl2: 	Added known joystick Xbox 360 Wireless Receiver (instance ID: 3, device index: 0)
lvl3: 	UIModeController::logInput( Xbox 360 Wireless Receiver ):Button 0, isMappedTo= a, , value=1, isValidInput: yes
lvl3: 	UIModeController::logInput( Xbox 360 Wireless Receiver ):Button 0, isMappedTo= a, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( Xbox 360 Wireless Receiver ):Button 1, isMappedTo= b, , value=1, isValidInput: yes
lvl3: 	UIModeController::logInput( Xbox 360 Wireless Receiver ):Button 1, isMappedTo= b, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( Xbox 360 Wireless Receiver ):Button 1, isMappedTo= b, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( Xbox 360 Wireless Receiver ):Button 0, isMappedTo= a, , value=1, isValidInput: yes
lvl3: 	UIModeController::logInput( Xbox 360 Wireless Receiver ):Button 0, isMappedTo= a, , value=0, isValidInput: no

Result for 8bitdo NES30 Game-pad controller : NOT WORKING!

lvl3: 	UIModeController::logInput( 8Bitdo NES30 GamePad ):Button 0, isMappedTo= a, , value=1, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo NES30 GamePad ):Button 0, isMappedTo= a, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo NES30 GamePad ):Button 1, isMappedTo= b, , value=1, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo NES30 GamePad ):Button 1, isMappedTo= b, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo NES30 GamePad ):Button 1, isMappedTo= b, , value=0, isValidInput: no

Result for 8bitdo NES30 PRO Game-pad controller : WORKING FINE

lvl3: 	UIModeController::logInput( 8Bitdo NES30 Pro ):Hat 0 up, isMappedTo= up, , value=1, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo NES30 Pro ):Hat 0 neutral?, isMappedTo= down, left, right, up, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo NES30 Pro ):Hat 0 up, isMappedTo= up, , value=1, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo NES30 Pro ):Hat 0 neutral?, isMappedTo= down, left, right, up, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo NES30 Pro ):Hat 0 down, isMappedTo= down, , value=4, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo NES30 Pro ):Hat 0 neutral?, isMappedTo= down, left, right, up, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo NES30 Pro ):Hat 0 down, isMappedTo= down, , value=4, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo NES30 Pro ):Hat 0 neutral?, isMappedTo= down, left, right, up, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo NES30 Pro ):Hat 0 left, isMappedTo= left, , value=8, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo NES30 Pro ):Hat 0 neutral?, isMappedTo= down, left, right, up, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo NES30 Pro ):Hat 0 right, isMappedTo= right, , value=2, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo NES30 Pro ):Hat 0 neutral?, isMappedTo= down, left, right, up, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo NES30 Pro ):Hat 0 left, isMappedTo= left, , value=8, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo NES30 Pro ):Hat 0 neutral?, isMappedTo= down, left, right, up, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo NES30 Pro ):Hat 0 right, isMappedTo= right, , value=2, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo NES30 Pro ):Hat 0 neutral?, isMappedTo= down, left, right, up, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo NES30 Pro ):Button 1, isMappedTo= b, , value=1, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo NES30 Pro ):Button 1, isMappedTo= b, , value=0, isValidInput: no

Result for 8bitdo SNES30 Game-pad controller : Working before and nos NOT WORKING :(

lvl2: 	Added known joystick 8Bitdo SFC30 GamePad (instance ID: 2, device index: 0)
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Axis 0-, isMappedTo= left, , value=-1, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Axis 1-, isMappedTo= up, , value=-1, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Axis 1-, isMappedTo= down, up, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Axis 2-, isMappedTo= , value=-1, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Axis 2-, isMappedTo= , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Axis 3-, isMappedTo= , value=-1, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Axis 3-, isMappedTo= , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Axis 0-, isMappedTo= left, right, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Axis 0-, isMappedTo= left, , value=-1, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Axis 0-, isMappedTo= left, right, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Axis 0+, isMappedTo= right, , value=1, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Axis 0-, isMappedTo= left, right, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Axis 0+, isMappedTo= right, , value=1, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Axis 0-, isMappedTo= left, right, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Button 1, isMappedTo= b, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Button 0, isMappedTo= a, , value=1, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Button 0, isMappedTo= a, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Button 1, isMappedTo= b, , value=1, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Button 1, isMappedTo= b, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Button 1, isMappedTo= b, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Button 0, isMappedTo= a, , value=1, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Button 0, isMappedTo= a, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Button 1, isMappedTo= b, , value=1, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Button 1, isMappedTo= b, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Button 1, isMappedTo= b, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Button 0, isMappedTo= a, , value=1, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Button 0, isMappedTo= a, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Button 1, isMappedTo= b, , value=1, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Button 1, isMappedTo= b, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Button 1, isMappedTo= b, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Button 0, isMappedTo= a, , value=1, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Button 0, isMappedTo= a, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Button 1, isMappedTo= b, , value=1, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Button 1, isMappedTo= b, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Button 1, isMappedTo= b, , value=0, isValidInput: no
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Button 0, isMappedTo= a, , value=1, isValidInput: yes
lvl3: 	UIModeController::logInput( 8Bitdo SFC30 GamePad ):Button 0, isMappedTo= a, , value=0, isValidInput: no

I will receive the 8bitdo SNES30 PRO the 14 December. I will try it later ;)

Have you remove the full KEY tracking ?

Zigurana

@darknior thanks for the tests, you are the best!

Questions : the logging for the failing controllers, is that all available logging? I am only seeing a couple of lines for the x360 and NES30 controllers. I will need to see all keypresses to understand what is going on here.
Also, the input from the SNES30 controller seems rather random, was that intentional?

darknior

Questions : the logging for the failing controllers, is that all available logging? I am only seeing a couple of lines for the x360 and NES30 controllers. I will need to see all keypresses to understand what is going on here.

Yes it's the problem, it not log all the keys :(

Also, the input from the SNES30 controller seems rather random, was that intentional?

No it's not, il only made the KONAMI CODE

Zigurana

@darknior I don't know what is going on. Do you have other issues with these controllers? Are they fully configured in EmulationStation ?

darknior

@darknior I don't know what is going on. Do you have other issues with these controllers? Are they fully configured in EmulationStation ?

Yes there are all working 100% in ES, RETROARCH, Solarus, N64 and many more :D
The best Joystick ever in the world for sure !!!
I have stop to use my x360 Gamepad now i have buy them lol

Zigurana

@darknior
Ok, thanks again for testing.
Now to really understand how these input are somehow not arriving, I'd like you to do some more tests.
Would you be willing to try some more and (try to) unlock while filming the screen?

Do do so, I'd like you to take the same ES installation as you've used just now, so the one from my UIModeInputHandling branch, and do the following steps:

Start it with the debug flag like before.
Connect one of the controllers that did work
Lock the UI (set to kiosk or kid mode, doesnt matter)
Go to a gamelistview, so inside a system
Try to enter the konami-code, to confirm that the inputs are handled correctly
If that works, please disconnect it, and connect one of the not working controllers like the x360,
Run the controller setup wizard, to see if all buttons and axes are recognized and set correctly
Repeat step 3-5, and while trying to unlock, could you make a movie of the screen?
Repeat step 7 and 8 for all controllers you are willing / able to test.

You can just upload the complete es-log.txt file to pastebin or something similar, no need to find the correct lines, I'll take a look then.
NB: if you want to take a look at the logfile while its being written, you can run tail -f /home/pi/.emulationstation/es-log.txt from an external SSH session, and see the logging for inputs as they appear in the logfile.

I appreciate that this is considerable effort to ask of you, especially because you have done a lot to help already. Thank you for considering it.

Of course if anyone else wants to test with an xbox360 or 8BitDo controller, please go ahead, at this point I can use all the data I can get.

darknior

@zigurana It is exactly 100% what i already do yesterday. All you write.

Go to a gamelistview, so inside a system

I only change this one, i try the code on HOME menu, if i try it on gamelist and press A it launch a game and i don't want.
And when i try it log no more informations. Have you remove some log tracker from your old ControllerInput build, x360 works fine.

akafox

@zigurana I have to nitpick. I noticed the kiosk mode leaves the retropie selection available and the kids mode does not. I love the the kids mode! :D

As for the kiosk mode..well I like that the retropie menu is there in case I need a quick change..but on the other hand I don't want it even assessable because of the "big kids"...just asking if there is a way to do that WITHOUT editing the es_systems.cfg..like maybe in full mode show the retropie selection..in kiosk and kids mode not show it. Almost seems redundant I guess.

NOT complaining just commenting. Thank you for these features..now i don't have to "babysit" people using my pi THANK YOU!