RetroPie forum home
    • Recent
    • Tags
    • Popular
    • Home
    • Docs
    • Register
    • Login

    Sony DualShock 3 - call for testers: "sixaxis" script module

    Scheduled Pinned Locked Moved Ideas and Development
    sixaxisdriverbeta
    208 Posts 24 Posters 34.4k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • madmodder123M
      madmodder123
      last edited by madmodder123

      @psyke83
      So I did the commands you suggested above, and the issue was not resolved I then ran the following:

      sudo apt-get remove --purge libsdl2-dev
sudo apt-get -f install &&
sudo apt-get autoremove &&
sudo apt-get -y autoclean &&
sudo apt-get -y clean

      after running those I tried to reinstall SDL/ES again and the error messages still occurs.

      Does it matter that I have this version of SDL still installed?:

      hi  libsdl1.2-dev                         1.2.15-12rpi                                                                                                  armhf        Simple DirectMedia Layer development files
ii  libsdl1.2debian:armhf                 1.2.15-12rpi                                                                                                  armhf        Simple DirectMedia Layer

      I have been using and updating this image of RetroPie for a little over a year now (i'm not sure which version I started with). Perhaps that has something to do with this?

      1 Reply Last reply Reply Quote 0
      • P
        psyke83 Global Moderator
        last edited by psyke83

        I tried doing the opposite; I rebuilt SDL with the patch that I mentioned earlier re-applied to the source, and couldn't reproduce the SDL log spam, even after rebuilding EmulationStation. I'm quite perplexed at the situation, as my controller produces the same keycode values as yours, but I've never seen these messages on jessie or stretch.

        If you happen to have a spare SD card, perhaps you could try re-installing the latest image and testing the PR on a fresh installation? That's asking a lot, however, so don't feel obliged. The next release is going to be based on stretch, so perhaps it's better to wait a little while for that.

        Apart from the spam, have you encountered any issues? It's been reported to me that ps3controller (sixad) causes dropped inputs when multiple controllers are used; I'm curious if the PR improves that situation or not.

        Your version of SDL1 is also up-to-date, but as far as I can tell it doesn't have the same problem, and EmulationStation uses SDL2 exclusively.

        madmodder123M 1 Reply Last reply Reply Quote 0
        • madmodder123M
          madmodder123
          last edited by

          I can try it on a fresh image of RP this weekend, when you mean multiple controllers do you mean multiple PS3 controllers? or a combination of different controllers?
          Any idea when the next RP version based on Stretch is going to be released? Maybe I could just wait for it to come out and copy all my custom settings/files from my current image to a fresh image (although that would be a major task in and of itself, I have added an ungodly amount of customization to my image).
          Also I might be able to compress my image and host it on Dropbox or something if you really want to take a look at it.

          1 Reply Last reply Reply Quote 0
          • madmodder123M
            madmodder123 @psyke83
            last edited by

            @psyke83 Good news, I was able to compile ES from a fresh copy of RetroPie and then copy that executable over to my original image and the message no longer appears :)

            P 1 Reply Last reply Reply Quote 0
            • P
              psyke83 Global Moderator @madmodder123
              last edited by

              @madmodder123 said in Sony DualShock 3 - call for testers: "sixaxis" script module:

              @psyke83 Good news, I was able to compile ES from a fresh copy of RetroPie and then copy that executable over to my original image and the message no longer appears :)

              Good news - so let's assume it's a quirk from your installation that won't impact most users. If you really want to figure out why it's happening, some thoughts below.

              I posted the wrong link before; this is the commit that should have fixed your problem.

              Perhaps you could try to do a grep of the libraries on your system:

              grep -r "key you just pressed" /usr/lib

              Mine results in a match in libSDL2, but it's only the message from the X11 video driver which doesn't get used on RetroPie (and yours was also the EVDEV one that the commit above would silence):

              $ strings /usr/lib/arm-linux-gnueabihf/libSDL2-2.0.so.0.7.0 | grep "key you just pressed"
The key you just pressed is not recognized by SDL. To help get this fixed, please report this to the SDL forums/mailing list <https://discourse.libsdl.org/> X11 KeyCode %d (%d), X11 KeySym 0x%lX (%s).

              Perhaps you could also try rebuilding EmulationStation and grepping the resulting binary for the string... although I don't see why that'd happen unless you modified the source to statically link SDL2 into the executable.

              madmodder123M 1 Reply Last reply Reply Quote 0
              • pjftP
                pjft
                last edited by

                Thanks @psyke83 , this works great on my end as well with the original PS3 controllers and Shanwan as well.

                Does anyone have gasia controllers they could test? Tagging @meleu @mediamogul @cyperghost in hopes one of them would have these? :)

                cyperghostC mediamogulM 2 Replies Last reply Reply Quote 0
                • cyperghostC
                  cyperghost @pjft
                  last edited by

                  @pjft No ...2 idroid:con paddels here ;)

                  1 Reply Last reply Reply Quote 1
                  • mediamogulM
                    mediamogul Global Moderator @pjft
                    last edited by

                    @pjft

                    Sorry, none here either.

                    RetroPie v4.5 • RPi3 Model B • 5.1V 2.5A PSU • 16GB SanDisk microSD • 512GB External Drive

                    1 Reply Last reply Reply Quote 1
                    • pjftP
                      pjft
                      last edited by

                      @mediamogul @cyperghost thanks, sorry for tagging you. It was worth a shot? :)

                      mediamogulM cyperghostC 2 Replies Last reply Reply Quote 0
                      • mediamogulM
                        mediamogul Global Moderator @pjft
                        last edited by

                        @pjft said in Sony DualShock 3 - call for testers: "sixaxis" script module:

                        sorry for tagging you. It was worth a shot? :)

                        Not a problem. Never hurts to ask.

                        RetroPie v4.5 • RPi3 Model B • 5.1V 2.5A PSU • 16GB SanDisk microSD • 512GB External Drive

                        1 Reply Last reply Reply Quote 0
                        • cyperghostC
                          cyperghost @pjft
                          last edited by

                          @pjft No problem bro
                          Always here for help :)

                          1 Reply Last reply Reply Quote 0
                          • madmodder123M
                            madmodder123 @psyke83
                            last edited by

                            @psyke83 I have been busy but I will do this when I have time!

                            1 Reply Last reply Reply Quote 0
                            • SanoS
                              Sano
                              last edited by Sano

                              Just for information, I tested this with the Etch image with official PS3 controllers.
                              Pairing works fine (wasn't working at all with the native image).

                              I got a lot of unwanted button press, even in the controller configuration phase, which is pretty annoying.
                              Dmesg is full with Bluetooth: hci0: Frame reassembly failed (-84) and Bluetooth: hci0 SCO packet for unknown connection handle 5125 errors, but I doubt this has to do with your script module (already had those errors with jessie and native bluetooth).
                              I'll have to find a bluetooth adapter to see if this helps, as I've seen around the web.

                              P 1 Reply Last reply Reply Quote 0
                              • P
                                psyke83 Global Moderator @Sano
                                last edited by psyke83

                                @sano

                                Thanks for testing! Some questions, if you don't mind...

                                Did you install the PR more than 5 days ago? In the latest refresh of the PR, I patched the hid-sony kernel driver to make it use the original button mappings from the kernel 4.9 driver, but I also made a change that would cause errant button presses related to L2/R2.

                                The unmodified hid-sony driver's behaviour with the L2/R2 triggers is to emit both digital button and analog axis events, which gets interpreted as two separate presses in userspace. In the latest refresh of the PR that reverts to the old mappings, I also patched the driver to disable the analog trigger axes, leaving just the digital buttons presses.

                                If you're testing an older PR, I recommend that you update and see if the situation improves. If not, any further information you could provide (such as specific buttons causing problems) would be appreciated.

                                You can use a program such as evtest to monitor button presses on your controller.

                                1 Reply Last reply Reply Quote 0
                                • SanoS
                                  Sano
                                  last edited by Sano

                                  I installed it just today, so it's up to date I think.
                                  I got a lot of random button press without touching anything :

                                  Exemple in 25s :

                                  Testing ... (interrupt to exit)
Event: time 1518638433.914937, type 3 (EV_ABS), code 0 (ABS_X), value 133
Event: time 1518638433.914937, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518638433.914937, type 3 (EV_ABS), code 2 (ABS_Z), value 124
Event: time 1518638433.914937, type 3 (EV_ABS), code 5 (ABS_RZ), value 0
Event: time 1518638433.914937, -------------- SYN_REPORT ------------
Event: time 1518638433.921678, type 3 (EV_ABS), code 0 (ABS_X), value 126
Event: time 1518638433.921678, type 3 (EV_ABS), code 1 (ABS_Y), value 127
Event: time 1518638433.921678, type 3 (EV_ABS), code 2 (ABS_Z), value 133
Event: time 1518638433.921678, type 3 (EV_ABS), code 5 (ABS_RZ), value 125
Event: time 1518638433.921678, -------------- SYN_REPORT ------------
Event: time 1518638433.954201, type 3 (EV_ABS), code 5 (ABS_RZ), value 124
Event: time 1518638433.954201, -------------- SYN_REPORT ------------
Event: time 1518638450.121688, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518638450.121688, -------------- SYN_REPORT ------------
Event: time 1518638450.155507, type 3 (EV_ABS), code 1 (ABS_Y), value 127
Event: time 1518638450.155507, -------------- SYN_REPORT ------------
Event: time 1518638450.793715, type 3 (EV_ABS), code 0 (ABS_X), value 125
Event: time 1518638450.793715, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518638450.793715, type 3 (EV_ABS), code 2 (ABS_Z), value 0
Event: time 1518638450.793715, type 3 (EV_ABS), code 5 (ABS_RZ), value 0
Event: time 1518638450.793715, -------------- SYN_REPORT ------------
Event: time 1518638450.797955, type 3 (EV_ABS), code 1 (ABS_Y), value 128
Event: time 1518638450.797955, type 3 (EV_ABS), code 2 (ABS_Z), value 134
Event: time 1518638450.797955, type 3 (EV_ABS), code 5 (ABS_RZ), value 125
Event: time 1518638450.797955, -------------- SYN_REPORT ------------
Event: time 1518638450.830513, type 3 (EV_ABS), code 1 (ABS_Y), value 127
Event: time 1518638450.830513, -------------- SYN_REPORT ------------
Event: time 1518638450.997973, type 3 (EV_ABS), code 2 (ABS_Z), value 133
Event: time 1518638450.997973, type 3 (EV_ABS), code 5 (ABS_RZ), value 124
Event: time 1518638450.997973, -------------- SYN_REPORT ------------
Event: time 1518638451.873738, type 3 (EV_ABS), code 0 (ABS_X), value 124
Event: time 1518638451.873738, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518638451.873738, type 3 (EV_ABS), code 2 (ABS_Z), value 0
Event: time 1518638451.873738, type 3 (EV_ABS), code 5 (ABS_RZ), value 0
Event: time 1518638451.873738, -------------- SYN_REPORT ------------
Event: time 1518638451.876727, type 3 (EV_ABS), code 1 (ABS_Y), value 127
Event: time 1518638451.876727, type 3 (EV_ABS), code 2 (ABS_Z), value 134
Event: time 1518638451.876727, type 3 (EV_ABS), code 5 (ABS_RZ), value 125
Event: time 1518638451.876727, -------------- SYN_REPORT ------------
Event: time 1518638451.909286, type 3 (EV_ABS), code 2 (ABS_Z), value 133
Event: time 1518638451.909286, -------------- SYN_REPORT ------------
Event: time 1518638451.953730, type 3 (EV_ABS), code 0 (ABS_X), value 134
Event: time 1518638451.953730, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518638451.953730, type 3 (EV_ABS), code 2 (ABS_Z), value 125
Event: time 1518638451.953730, type 3 (EV_ABS), code 5 (ABS_RZ), value 0
Event: time 1518638451.953730, -------------- SYN_REPORT ------------
Event: time 1518638451.986736, type 3 (EV_ABS), code 0 (ABS_X), value 126
Event: time 1518638451.986736, type 3 (EV_ABS), code 1 (ABS_Y), value 127
Event: time 1518638451.986736, type 3 (EV_ABS), code 2 (ABS_Z), value 134
Event: time 1518638451.986736, type 3 (EV_ABS), code 5 (ABS_RZ), value 125
Event: time 1518638451.986736, -------------- SYN_REPORT ------------
Event: time 1518638452.053726, type 3 (EV_ABS), code 0 (ABS_X), value 134
Event: time 1518638452.053726, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518638452.053726, type 3 (EV_ABS), code 2 (ABS_Z), value 125
Event: time 1518638452.053726, type 3 (EV_ABS), code 5 (ABS_RZ), value 0
Event: time 1518638452.053726, -------------- SYN_REPORT ------------
Event: time 1518638452.056753, type 3 (EV_ABS), code 0 (ABS_X), value 126
Event: time 1518638452.056753, type 3 (EV_ABS), code 1 (ABS_Y), value 128
Event: time 1518638452.056753, type 3 (EV_ABS), code 2 (ABS_Z), value 134
Event: time 1518638452.056753, type 3 (EV_ABS), code 5 (ABS_RZ), value 125
Event: time 1518638452.056753, -------------- SYN_REPORT ------------
Event: time 1518638452.089285, type 3 (EV_ABS), code 1 (ABS_Y), value 127
Event: time 1518638452.089285, -------------- SYN_REPORT ------------
Event: time 1518638452.123734, type 3 (EV_ABS), code 0 (ABS_X), value 134
Event: time 1518638452.123734, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518638452.123734, type 3 (EV_ABS), code 2 (ABS_Z), value 125
Event: time 1518638452.123734, type 3 (EV_ABS), code 5 (ABS_RZ), value 0
Event: time 1518638452.123734, -------------- SYN_REPORT ------------
Event: time 1518638452.259251, type 3 (EV_ABS), code 0 (ABS_X), value 126
Event: time 1518638452.259251, type 3 (EV_ABS), code 1 (ABS_Y), value 127
Event: time 1518638452.259251, type 3 (EV_ABS), code 2 (ABS_Z), value 133
Event: time 1518638452.259251, type 3 (EV_ABS), code 5 (ABS_RZ), value 124
Event: time 1518638452.259251, -------------- SYN_REPORT ------------
^C
real    0m25.281s
user    0m0.010s
sys     0m0.000s

                                  But as I said, I have a lot of errors in dmesg about hci0.
                                  I read that people only get rid of this by using a BT key and not the native Pi3 BT chipset...
                                  It also seems that 4.14 is around the corner according to rpi-update github, but I didn't see anything about BT...

                                  P 1 Reply Last reply Reply Quote 0
                                  • P
                                    psyke83 Global Moderator @Sano
                                    last edited by

                                    @sano

                                    X/Y is the left analog stick and Z/RZ is the right. Does the evtest output always report this activity, or does it happen sporadically?

                                    I have two official controllers (with different revision components inside), and neither has this issue.

                                    Can you post the output from the beginning of evtest that shows the supported events and values? I've set a fuzz of 3 to match the older driver, as the analog sticks fluctuate between +/- a value of 1 for the resting position. Your output is very odd, however.

                                    Can you also check your evtest output when connected via USB to see if the same happens? Make sure to disconnect from Bluetooth before plugging, as it may remain connected via BT when plugging the cable while already paired.

                                    1 Reply Last reply Reply Quote 0
                                    • SanoS
                                      Sano
                                      last edited by

                                      Sorry I'm back home.

                                      Here are the requested :

                                      Sixaxis USB connected :

                                      pi@retropie:~/RetroPie-Setup $ time evtest 
No device specified, trying to scan all of /dev/input/event*
Not running as root, no devices may be available.
Available devices:
/dev/input/event0:      HORI CO.,LTD. Fighting Stick mini 4
/dev/input/event1:      Sony PLAYSTATION(R)3 Controller
Select the device event number [0-1]: 1
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x54c product 0x268 version 0x8111
Input device name: "Sony PLAYSTATION(R)3 Controller"
Supported events:
  Event type 0 (EV_SYN)
  Event type 1 (EV_KEY)
    Event code 288 (BTN_TRIGGER)
    Event code 289 (BTN_THUMB)
    Event code 290 (BTN_THUMB2)
    Event code 291 (BTN_TOP)
    Event code 292 (BTN_TOP2)
    Event code 293 (BTN_PINKIE)
    Event code 294 (BTN_BASE)
    Event code 295 (BTN_BASE2)
    Event code 296 (BTN_BASE3)
    Event code 297 (BTN_BASE4)
    Event code 298 (BTN_BASE5)
    Event code 299 (BTN_BASE6)
    Event code 300 (?)
    Event code 301 (?)
    Event code 302 (?)
    Event code 303 (BTN_DEAD)
    Event code 704 (BTN_TRIGGER_HAPPY1)
  Event type 3 (EV_ABS)
    Event code 0 (ABS_X)
      Value      0
      Min        0
      Max      255
      Fuzz       3
      Flat      15
    Event code 1 (ABS_Y)
      Value      0
      Min        0
      Max      255
      Fuzz       3
      Flat      15
    Event code 2 (ABS_Z)
      Value      0
      Min        0
      Max      255
      Fuzz       3
      Flat      15
    Event code 5 (ABS_RZ)
      Value      0
      Min        0
      Max      255
      Fuzz       3
      Flat      15
  Event type 4 (EV_MSC)
    Event code 4 (MSC_SCAN)
  Event type 21 (EV_FF)
    Event code 80 (FF_RUMBLE)
    Event code 81 (FF_PERIODIC)
    Event code 88 (FF_SQUARE)
    Event code 89 (FF_TRIANGLE)
    Event code 90 (FF_SINE)
    Event code 96 (FF_GAIN)
Properties:
Testing ... (interrupt to exit)
^C
real    0m57.535s
user    0m0.000s
sys     0m0.000s

                                      Sixaxis BT connected :

                                      pi@retropie:~/RetroPie-Setup $ time evtest 
No device specified, trying to scan all of /dev/input/event*
Not running as root, no devices may be available.
Available devices:
/dev/input/event0:      HORI CO.,LTD. Fighting Stick mini 4
/dev/input/event1:      Sony PLAYSTATION(R)3 Controller
Select the device event number [0-1]: 1
Input driver version is 1.0.1
Input device ID: bus 0x5 vendor 0x54c product 0x268 version 0x8000
Input device name: "Sony PLAYSTATION(R)3 Controller"
Supported events:
  Event type 0 (EV_SYN)
  Event type 1 (EV_KEY)
    Event code 288 (BTN_TRIGGER)
    Event code 289 (BTN_THUMB)
    Event code 290 (BTN_THUMB2)
    Event code 291 (BTN_TOP)
    Event code 292 (BTN_TOP2)
    Event code 293 (BTN_PINKIE)
    Event code 294 (BTN_BASE)
    Event code 295 (BTN_BASE2)
    Event code 296 (BTN_BASE3)
    Event code 297 (BTN_BASE4)
    Event code 298 (BTN_BASE5)
    Event code 299 (BTN_BASE6)
    Event code 300 (?)
    Event code 301 (?)
    Event code 302 (?)
    Event code 303 (BTN_DEAD)
    Event code 704 (BTN_TRIGGER_HAPPY1)
  Event type 3 (EV_ABS)
    Event code 0 (ABS_X)
      Value    121
      Min        0
      Max      255
      Fuzz       3
      Flat      15
    Event code 1 (ABS_Y)
      Value    127
      Min        0
      Max      255
      Fuzz       3
      Flat      15
    Event code 2 (ABS_Z)
      Value    134
      Min        0
      Max      255
      Fuzz       3
      Flat      15
    Event code 5 (ABS_RZ)
      Value    125
      Min        0
      Max      255
      Fuzz       3
      Flat      15
  Event type 4 (EV_MSC)
    Event code 4 (MSC_SCAN)
  Event type 21 (EV_FF)
    Event code 80 (FF_RUMBLE)
    Event code 81 (FF_PERIODIC)
    Event code 88 (FF_SQUARE)
    Event code 89 (FF_TRIANGLE)
    Event code 90 (FF_SINE)
    Event code 96 (FF_GAIN)
Properties:
Testing ... (interrupt to exit)
Event: time 1518718455.624169, type 3 (EV_ABS), code 0 (ABS_X), value 127
Event: time 1518718455.624169, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518718455.624169, -------------- SYN_REPORT ------------
Event: time 1518718455.656757, type 3 (EV_ABS), code 0 (ABS_X), value 121
Event: time 1518718455.656757, type 3 (EV_ABS), code 1 (ABS_Y), value 127
Event: time 1518718455.656757, -------------- SYN_REPORT ------------
Event: time 1518718455.756161, type 3 (EV_ABS), code 0 (ABS_X), value 134
Event: time 1518718455.756161, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518718455.756161, type 3 (EV_ABS), code 2 (ABS_Z), value 125
Event: time 1518718455.756161, type 3 (EV_ABS), code 5 (ABS_RZ), value 0
Event: time 1518718455.756161, -------------- SYN_REPORT ------------
Event: time 1518718455.961739, type 3 (EV_ABS), code 0 (ABS_X), value 121
Event: time 1518718455.961739, type 3 (EV_ABS), code 1 (ABS_Y), value 128
Event: time 1518718455.961739, type 3 (EV_ABS), code 2 (ABS_Z), value 134
Event: time 1518718455.961739, type 3 (EV_ABS), code 5 (ABS_RZ), value 126
Event: time 1518718455.961739, -------------- SYN_REPORT ------------
Event: time 1518718455.994244, type 3 (EV_ABS), code 1 (ABS_Y), value 127
Event: time 1518718455.994244, -------------- SYN_REPORT ------------
Event: time 1518718456.119217, type 3 (EV_ABS), code 5 (ABS_RZ), value 125
Event: time 1518718456.119217, -------------- SYN_REPORT ------------
Event: time 1518718456.186158, type 3 (EV_ABS), code 0 (ABS_X), value 123
Event: time 1518718456.186158, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518718456.186158, type 3 (EV_ABS), code 2 (ABS_Z), value 0
Event: time 1518718456.186158, type 3 (EV_ABS), code 5 (ABS_RZ), value 0
Event: time 1518718456.186158, -------------- SYN_REPORT ------------
Event: time 1518718456.219195, type 3 (EV_ABS), code 0 (ABS_X), value 122
Event: time 1518718456.219195, type 3 (EV_ABS), code 1 (ABS_Y), value 127
Event: time 1518718456.219195, type 3 (EV_ABS), code 2 (ABS_Z), value 134
Event: time 1518718456.219195, type 3 (EV_ABS), code 5 (ABS_RZ), value 125
Event: time 1518718456.219195, -------------- SYN_REPORT ------------
Event: time 1518718456.354219, type 3 (EV_ABS), code 0 (ABS_X), value 121
Event: time 1518718456.354219, -------------- SYN_REPORT ------------
Event: time 1518718456.524173, type 3 (EV_ABS), code 0 (ABS_X), value 128
Event: time 1518718456.524173, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518718456.524173, -------------- SYN_REPORT ------------
Event: time 1518718456.556733, type 3 (EV_ABS), code 0 (ABS_X), value 121
Event: time 1518718456.556733, type 3 (EV_ABS), code 1 (ABS_Y), value 127
Event: time 1518718456.556733, -------------- SYN_REPORT ------------
Event: time 1518718456.656176, type 3 (EV_ABS), code 0 (ABS_X), value 134
Event: time 1518718456.656176, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518718456.656176, type 3 (EV_ABS), code 2 (ABS_Z), value 126
Event: time 1518718456.656176, type 3 (EV_ABS), code 5 (ABS_RZ), value 0
Event: time 1518718456.656176, -------------- SYN_REPORT ------------
Event: time 1518718456.659266, type 3 (EV_ABS), code 0 (ABS_X), value 121
Event: time 1518718456.659266, type 3 (EV_ABS), code 1 (ABS_Y), value 128
Event: time 1518718456.659266, type 3 (EV_ABS), code 2 (ABS_Z), value 134
Event: time 1518718456.659266, type 3 (EV_ABS), code 5 (ABS_RZ), value 126
Event: time 1518718456.659266, -------------- SYN_REPORT ------------
Event: time 1518718456.691728, type 3 (EV_ABS), code 1 (ABS_Y), value 127
Event: time 1518718456.691728, -------------- SYN_REPORT ------------
Event: time 1518718456.726143, type 3 (EV_ABS), code 0 (ABS_X), value 134
Event: time 1518718456.726143, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518718456.726143, type 3 (EV_ABS), code 2 (ABS_Z), value 126
Event: time 1518718456.726143, type 3 (EV_ABS), code 5 (ABS_RZ), value 0
Event: time 1518718456.726143, -------------- SYN_REPORT ------------
Event: time 1518718456.759217, type 3 (EV_ABS), code 0 (ABS_X), value 121
Event: time 1518718456.759217, type 3 (EV_ABS), code 1 (ABS_Y), value 127
Event: time 1518718456.759217, type 3 (EV_ABS), code 2 (ABS_Z), value 134
Event: time 1518718456.759217, type 3 (EV_ABS), code 5 (ABS_RZ), value 125
Event: time 1518718456.759217, -------------- SYN_REPORT ------------
Event: time 1518718457.736192, type 3 (EV_ABS), code 0 (ABS_X), value 134
Event: time 1518718457.736192, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518718457.736192, type 3 (EV_ABS), code 2 (ABS_Z), value 125
Event: time 1518718457.736192, type 3 (EV_ABS), code 5 (ABS_RZ), value 0
Event: time 1518718457.736192, -------------- SYN_REPORT ------------
Event: time 1518718457.741802, type 3 (EV_ABS), code 0 (ABS_X), value 122
Event: time 1518718457.741802, type 3 (EV_ABS), code 1 (ABS_Y), value 127
Event: time 1518718457.741802, type 3 (EV_ABS), code 2 (ABS_Z), value 134
Event: time 1518718457.741802, type 3 (EV_ABS), code 5 (ABS_RZ), value 126
Event: time 1518718457.741802, -------------- SYN_REPORT ------------
Event: time 1518718457.771734, type 3 (EV_ABS), code 0 (ABS_X), value 121
Event: time 1518718457.771734, -------------- SYN_REPORT ------------
Event: time 1518718457.804250, type 3 (EV_ABS), code 0 (ABS_X), value 127
Event: time 1518718457.804250, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518718457.804250, -------------- SYN_REPORT ------------
Event: time 1518718457.807924, type 3 (EV_ABS), code 0 (ABS_X), value 121
Event: time 1518718457.807924, type 3 (EV_ABS), code 1 (ABS_Y), value 127
Event: time 1518718457.807924, -------------- SYN_REPORT ------------
Event: time 1518718458.007967, type 3 (EV_ABS), code 5 (ABS_RZ), value 125
Event: time 1518718458.007967, -------------- SYN_REPORT ------------
Event: time 1518718459.796242, type 3 (EV_ABS), code 0 (ABS_X), value 134
Event: time 1518718459.796242, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518718459.796242, type 3 (EV_ABS), code 2 (ABS_Z), value 126
Event: time 1518718459.796242, type 3 (EV_ABS), code 5 (ABS_RZ), value 0
Event: time 1518718459.796242, -------------- SYN_REPORT ------------
Event: time 1518718459.829234, type 3 (EV_ABS), code 0 (ABS_X), value 121
Event: time 1518718459.829234, type 3 (EV_ABS), code 1 (ABS_Y), value 127
Event: time 1518718459.829234, type 3 (EV_ABS), code 2 (ABS_Z), value 134
Event: time 1518718459.829234, type 3 (EV_ABS), code 5 (ABS_RZ), value 126
Event: time 1518718459.829234, -------------- SYN_REPORT ------------
Event: time 1518718459.864267, type 3 (EV_ABS), code 0 (ABS_X), value 127
Event: time 1518718459.864267, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518718459.864267, -------------- SYN_REPORT ------------
Event: time 1518718459.896768, type 3 (EV_ABS), code 0 (ABS_X), value 121
Event: time 1518718459.896768, type 3 (EV_ABS), code 1 (ABS_Y), value 127
Event: time 1518718459.896768, -------------- SYN_REPORT ------------
Event: time 1518718459.931763, type 3 (EV_ABS), code 5 (ABS_RZ), value 125
Event: time 1518718459.931763, -------------- SYN_REPORT ------------
Event: time 1518718459.966173, type 3 (EV_ABS), code 0 (ABS_X), value 134
Event: time 1518718459.966173, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518718459.966173, type 3 (EV_ABS), code 2 (ABS_Z), value 125
Event: time 1518718459.966173, type 3 (EV_ABS), code 5 (ABS_RZ), value 0
Event: time 1518718459.966173, -------------- SYN_REPORT ------------
Event: time 1518718459.999256, type 3 (EV_ABS), code 0 (ABS_X), value 121
Event: time 1518718459.999256, type 3 (EV_ABS), code 1 (ABS_Y), value 127
Event: time 1518718459.999256, type 3 (EV_ABS), code 2 (ABS_Z), value 134
Event: time 1518718459.999256, type 3 (EV_ABS), code 5 (ABS_RZ), value 125
Event: time 1518718459.999256, -------------- SYN_REPORT ------------
Event: time 1518718460.664234, type 3 (EV_ABS), code 0 (ABS_X), value 127
Event: time 1518718460.664234, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518718460.664234, -------------- SYN_REPORT ------------
Event: time 1518718460.696760, type 3 (EV_ABS), code 0 (ABS_X), value 121
Event: time 1518718460.696760, type 3 (EV_ABS), code 1 (ABS_Y), value 127
Event: time 1518718460.696760, -------------- SYN_REPORT ------------
Event: time 1518718460.864217, type 3 (EV_ABS), code 0 (ABS_X), value 127
Event: time 1518718460.864217, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518718460.864217, -------------- SYN_REPORT ------------
Event: time 1518718460.866705, type 3 (EV_ABS), code 0 (ABS_X), value 124
Event: time 1518718460.866705, type 3 (EV_ABS), code 1 (ABS_Y), value 127
Event: time 1518718460.866705, -------------- SYN_REPORT ------------
Event: time 1518718460.899264, type 3 (EV_ABS), code 0 (ABS_X), value 122
Event: time 1518718460.899264, -------------- SYN_REPORT ------------
Event: time 1518718460.966749, type 3 (EV_ABS), code 0 (ABS_X), value 121
Event: time 1518718460.966749, -------------- SYN_REPORT ------------
^C
real    0m33.483s
user    0m0.000s
sys     0m0.010s

                                      I'll try the same with a Dualshock ASAP.

                                      1 Reply Last reply Reply Quote 0
                                      • SanoS
                                        Sano
                                        last edited by

                                        Here is the same test with an official DS3 controller :

                                        With USB :

                                        pi@retropie:~/RetroPie-Setup $ time evtest 
No device specified, trying to scan all of /dev/input/event*
Not running as root, no devices may be available.
Available devices:
/dev/input/event0:      HORI CO.,LTD. Fighting Stick mini 4
/dev/input/event1:      Sony PLAYSTATION(R)3 Controller
Select the device event number [0-1]: 1
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x54c product 0x268 version 0x8111
Input device name: "Sony PLAYSTATION(R)3 Controller"
Supported events:
  Event type 0 (EV_SYN)
  Event type 1 (EV_KEY)
    Event code 288 (BTN_TRIGGER)
    Event code 289 (BTN_THUMB)
    Event code 290 (BTN_THUMB2)
    Event code 291 (BTN_TOP)
    Event code 292 (BTN_TOP2)
    Event code 293 (BTN_PINKIE)
    Event code 294 (BTN_BASE)
    Event code 295 (BTN_BASE2)
    Event code 296 (BTN_BASE3)
    Event code 297 (BTN_BASE4)
    Event code 298 (BTN_BASE5)
    Event code 299 (BTN_BASE6)
    Event code 300 (?)
    Event code 301 (?)
    Event code 302 (?)
    Event code 303 (BTN_DEAD)
    Event code 704 (BTN_TRIGGER_HAPPY1)
  Event type 3 (EV_ABS)
    Event code 0 (ABS_X)
      Value      0
      Min        0
      Max      255
      Fuzz       3
      Flat      15
    Event code 1 (ABS_Y)
      Value      0
      Min        0
      Max      255
      Fuzz       3
      Flat      15
    Event code 2 (ABS_Z)
      Value      0
      Min        0
      Max      255
      Fuzz       3
      Flat      15
    Event code 5 (ABS_RZ)
      Value      0
      Min        0
      Max      255
      Fuzz       3
      Flat      15
  Event type 4 (EV_MSC)
    Event code 4 (MSC_SCAN)
  Event type 21 (EV_FF)
    Event code 80 (FF_RUMBLE)
    Event code 81 (FF_PERIODIC)
    Event code 88 (FF_SQUARE)
    Event code 89 (FF_TRIANGLE)
    Event code 90 (FF_SINE)
    Event code 96 (FF_GAIN)
Properties:
Testing ... (interrupt to exit)
^C
real    1m22.770s
user    0m0.000s
sys     0m0.000s

                                        With BT :

                                        pi@retropie:~/RetroPie-Setup $ time evtest              
No device specified, trying to scan all of /dev/input/event*
Not running as root, no devices may be available.
Available devices:
/dev/input/event0:      HORI CO.,LTD. Fighting Stick mini 4
/dev/input/event1:      Sony PLAYSTATION(R)3 Controller
Select the device event number [0-1]: 1
Input driver version is 1.0.1
Input device ID: bus 0x5 vendor 0x54c product 0x268 version 0x8000
Input device name: "Sony PLAYSTATION(R)3 Controller"
Supported events:
  Event type 0 (EV_SYN)
  Event type 1 (EV_KEY)
    Event code 288 (BTN_TRIGGER)
    Event code 289 (BTN_THUMB)
    Event code 290 (BTN_THUMB2)
    Event code 291 (BTN_TOP)
    Event code 292 (BTN_TOP2)
    Event code 293 (BTN_PINKIE)
    Event code 294 (BTN_BASE)
    Event code 295 (BTN_BASE2)
    Event code 296 (BTN_BASE3)
    Event code 297 (BTN_BASE4)
    Event code 298 (BTN_BASE5)
    Event code 299 (BTN_BASE6)
    Event code 300 (?)
    Event code 301 (?)
    Event code 302 (?)
    Event code 303 (BTN_DEAD)
    Event code 704 (BTN_TRIGGER_HAPPY1)
  Event type 3 (EV_ABS)
    Event code 0 (ABS_X)
      Value    128
      Min        0
      Max      255
      Fuzz       3
      Flat      15
    Event code 1 (ABS_Y)
      Value    129
      Min        0
      Max      255
      Fuzz       3
      Flat      15
    Event code 2 (ABS_Z)
      Value    130
      Min        0
      Max      255
      Fuzz       3
      Flat      15
    Event code 5 (ABS_RZ)
      Value    130
      Min        0
      Max      255
      Fuzz       3
      Flat      15
  Event type 4 (EV_MSC)
    Event code 4 (MSC_SCAN)
  Event type 21 (EV_FF)
    Event code 80 (FF_RUMBLE)
    Event code 81 (FF_PERIODIC)
    Event code 88 (FF_SQUARE)
    Event code 89 (FF_TRIANGLE)
    Event code 90 (FF_SINE)
    Event code 96 (FF_GAIN)
Properties:
Testing ... (interrupt to exit)
Event: time 1518719674.237363, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518719674.237363, -------------- SYN_REPORT ------------
Event: time 1518719674.269915, type 3 (EV_ABS), code 1 (ABS_Y), value 129
Event: time 1518719674.269915, -------------- SYN_REPORT ------------
Event: time 1518719674.677360, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518719674.677360, -------------- SYN_REPORT ------------
Event: time 1518719674.709918, type 3 (EV_ABS), code 1 (ABS_Y), value 129
Event: time 1518719674.709918, -------------- SYN_REPORT ------------
Event: time 1518719674.809465, type 3 (EV_ABS), code 0 (ABS_X), value 129
Event: time 1518719674.809465, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518719674.809465, type 3 (EV_ABS), code 5 (ABS_RZ), value 0
Event: time 1518719674.809465, -------------- SYN_REPORT ------------
Event: time 1518719674.812372, type 3 (EV_ABS), code 0 (ABS_X), value 128
Event: time 1518719674.812372, type 3 (EV_ABS), code 1 (ABS_Y), value 130
Event: time 1518719674.812372, type 3 (EV_ABS), code 5 (ABS_RZ), value 130
Event: time 1518719674.812372, -------------- SYN_REPORT ------------
Event: time 1518719674.844958, type 3 (EV_ABS), code 1 (ABS_Y), value 129
Event: time 1518719674.844958, -------------- SYN_REPORT ------------
Event: time 1518719674.879403, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518719674.879403, type 3 (EV_ABS), code 5 (ABS_RZ), value 0
Event: time 1518719674.879403, -------------- SYN_REPORT ------------
Event: time 1518719674.912426, type 3 (EV_ABS), code 1 (ABS_Y), value 129
Event: time 1518719674.912426, type 3 (EV_ABS), code 5 (ABS_RZ), value 130
Event: time 1518719674.912426, -------------- SYN_REPORT ------------
Event: time 1518719675.249444, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518719675.249444, type 3 (EV_ABS), code 2 (ABS_Z), value 0
Event: time 1518719675.249444, type 3 (EV_ABS), code 5 (ABS_RZ), value 0
Event: time 1518719675.249444, -------------- SYN_REPORT ------------
Event: time 1518719675.282450, type 3 (EV_ABS), code 1 (ABS_Y), value 129
Event: time 1518719675.282450, type 3 (EV_ABS), code 2 (ABS_Z), value 130
Event: time 1518719675.282450, type 3 (EV_ABS), code 5 (ABS_RZ), value 130
Event: time 1518719675.282450, -------------- SYN_REPORT ------------
Event: time 1518719675.349408, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518719675.349408, type 3 (EV_ABS), code 5 (ABS_RZ), value 0
Event: time 1518719675.349408, -------------- SYN_REPORT ------------
Event: time 1518719675.352426, type 3 (EV_ABS), code 1 (ABS_Y), value 130
Event: time 1518719675.352426, type 3 (EV_ABS), code 5 (ABS_RZ), value 130
Event: time 1518719675.352426, -------------- SYN_REPORT ------------
Event: time 1518719675.384983, type 3 (EV_ABS), code 1 (ABS_Y), value 129
Event: time 1518719675.384983, -------------- SYN_REPORT ------------
Event: time 1518719675.419397, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518719675.419397, type 3 (EV_ABS), code 2 (ABS_Z), value 0
Event: time 1518719675.419397, type 3 (EV_ABS), code 5 (ABS_RZ), value 0
Event: time 1518719675.419397, -------------- SYN_REPORT ------------
Event: time 1518719675.452456, type 3 (EV_ABS), code 1 (ABS_Y), value 129
Event: time 1518719675.452456, type 3 (EV_ABS), code 2 (ABS_Z), value 131
Event: time 1518719675.452456, type 3 (EV_ABS), code 5 (ABS_RZ), value 130
Event: time 1518719675.452456, -------------- SYN_REPORT ------------
Event: time 1518719675.484970, type 3 (EV_ABS), code 2 (ABS_Z), value 130
Event: time 1518719675.484970, -------------- SYN_REPORT ------------
Event: time 1518719677.217397, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518719677.217397, -------------- SYN_REPORT ------------
Event: time 1518719677.219915, type 3 (EV_ABS), code 1 (ABS_Y), value 129
Event: time 1518719677.219915, -------------- SYN_REPORT ------------
Event: time 1518719677.769398, type 3 (EV_ABS), code 0 (ABS_X), value 129
Event: time 1518719677.769398, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518719677.769398, type 3 (EV_ABS), code 5 (ABS_RZ), value 0
Event: time 1518719677.769398, -------------- SYN_REPORT ------------
Event: time 1518719677.802407, type 3 (EV_ABS), code 0 (ABS_X), value 128
Event: time 1518719677.802407, type 3 (EV_ABS), code 1 (ABS_Y), value 129
Event: time 1518719677.802407, type 3 (EV_ABS), code 5 (ABS_RZ), value 130
Event: time 1518719677.802407, -------------- SYN_REPORT ------------
Event: time 1518719677.837407, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1518719677.837407, -------------- SYN_REPORT ------------
Event: time 1518719677.869925, type 3 (EV_ABS), code 1 (ABS_Y), value 129
Event: time 1518719677.869925, -------------- SYN_REPORT ------------
^C
real    0m20.763s
user    0m0.000s
sys     0m0.010s

                                        Same behavior : No unwanted input with USB, a lot through BT :(

                                        P 1 Reply Last reply Reply Quote 0
                                        • P
                                          psyke83 Global Moderator @Sano
                                          last edited by psyke83

                                          @sano said in Sony DualShock 3 - call for testers: "sixaxis" script module:

                                          Same behavior : No unwanted input with USB, a lot through BT :(

                                          Bizarre. Do you have other Bluetooth peripherals paired during testing? Perhaps if you explicitly remove everything but the controller from the stack it may resolve the issue.

                                          Do you use the onboard wifi? Perhaps if you temporarily disconnect while testing the
                                          controller, it can help to identify if we're seeing Bluetooth coexistence issues.

                                          I'm using the onboard Bluetooth on my Pi3 and have never seen issues such as this - but I use ethernet instead of wifi, so that may be explain the discrepancy.

                                          1 Reply Last reply Reply Quote 0
                                          • SanoS
                                            Sano
                                            last edited by

                                            I only had one controller connected at a time.
                                            Moreover, I use ethernet, and disabled wifi via /boot/config.txt.
                                            The only other BT device in range is the my wife's Fitbit Flex, but it's obviously not paired with the Pi.
                                            Guess I'll need to find an external BT adapter and do more tests :)

                                            P 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post

                                            Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.

                                            Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.