SHANWAN / PS3 CONTROLLER Pi3 RETROPIE 3.6 BLUETOOTH SETUP

luetzel

@dagosand
I don't think it is necessary to bother the bluez guys with this issue. It just due to the fact that /firmware is at a non-standard location in contrast to other distributions. Guess that it is already possible to pass a ./configure --flag for pointing bluez to the path of the /firmware directory.

Ransom

@trevevs said in SHANWAN / PS3 CONTROLLER Pi3 RETROPIE 3.6 BLUETOOTH SETUP:

@trevevs
ahh looks like the guide s back up! Still not really able to follow on my OSMC with retrosmc install.
guessing I can skip to step 4 since I got git clone https://github.com/luetzel/bluez in step 3?
I did that and get the bluez folder/files in my osmc folder.

when you got bluez-5.39, do you mean the bluez folder I just got?

./configure --prefix=/usr --mandir=/usr/share/man --sysconfdir=/etc --localstatedir=/var --enable-sixaxis
seemed to do a lot of stuff ..

tried make -j3 but got:
: *** No targets specified and no makefile found. Stop.

Probably something daft Im doing??

cheers

I'm stuck on the same spot. I skipped to step 4 after downloading the git clone, but I don't get a bluez-5.39 folder, just a "bluez" folder. Same results as @trevevs for the other parts. Configure does a few things, but make and compile say I have no targets specified.

I'm pretty new to the pi scene, so I don't know how to move through folders and files within Raspbian, so a lot of the instructions from Step 5 on are pretty lost on me. Anyone get this to work?

luetzel

Hi @Ransom
Sorry that the guide is not clear enough. Yes, you have to 'cd' into the bluez folder after cloning it from the git repo. And, ./configure, as well as make must be run while being within the bluez folder. If not sure, you can check your current working directory with 'pwd'. Thus:

cd bluez
./configure --prefix=/usr --mandir=/usr/share/man --sysconfdir=/etc --localstatedir=/var --enable-sixaxis
make

should do it on your machine. Remember that 'make' or 'configure' may fail, if some header files are missing. Watch out for 'foo.h is missing' messages and install the missing dev packages using 'sudo apt-get install <name>-dev'.

I haven't had time to update the instructions with a list of all package-dependencies for compilation on a freshly installed system.

/luetzel

dagosand

@luetzel said in SHANWAN / PS3 CONTROLLER Pi3 RETROPIE 3.6 BLUETOOTH SETUP:

@dagosand
I don't think it is necessary to bother the bluez guys with this issue. It just due to the fact that /firmware is at a non-standard location in contrast to other distributions. Guess that it is already possible to pass a ./configure --flag for pointing bluez to the path of the /firmware directory.

Great!
Can you tell me how can I pass the correct flag in ./configure?

thanks

luetzel

@dagosand
I checked ./configure --help for suitable flags pointing it to the firmware directory, but it doesn't seem to be present^^ However, nothing speaks against using a symbolic link to /etc/firmware on distributions using a non standard firmware location. In some distributions, the link is automatically created by post-install scripts of the .deb or .rpm package. If you compile from source you have to do it manually.

auswear

I am really struggling getting this working.. I've think I've done all the above steps correctly as I can get one controller to pair, but I can't get 2 to pair at the same time. It's either one or the other. What am I doing wrong?

Also is there any way to stop the controller from vibrating every time I plug it into the USB to charge?

luetzel

Hi @auswear
For the second controller, try to “register” it using sixpair, but without having the first controller already paired/connected via bluetooth. Then, check with ‘sudo bluetoohctl’ whether you can see hardware addresses of both controllers. For pairing the second controller, wait until LED 1 lights up on the first, only then press the PS button on your second controller. If this doesn’t help, remove both devices using bluetoothctl and start over again with sixpair. Both must be authenticated/trusted for pairing them at the same time. You can check/follow the pairing process with dmesg and bluetoothctl.

About charging:
It is not possible to charge Shanwan controllers without rumbling while being connected to an USB port of your Raspberry Pi/Computer. Here I use an USB wall charger instead. Since the LEDs do not indicate battery level of the controller, I
use a ‘ USB charge doctor' in order to follow current/mA during charging. When mA drop below ~0.03, the battery is fully charged.

Hetoft

Hi @luetzel (and all you others)

Thanks so much for your work on this.

I am trying to configure my two genuine PS3 controllers (of course, just starting off with one) on RetroPie 4.0 (newest beta) on OSMC on a RPi3 and the onboard bluetooth.

I simply can not figure out how to get it to pair up. Even though I run the PS3 driver configuration from the RetroPie settings, whenever I disconnect it from the USB cable, it is not able to establish the bluetooth connection.

Bluetooth is enabled and able to discover my devices. I also tried with a bluetooth USB dongle; same result.

At some point in all of this tinkering, I managed to establish the bluetooth connection, with the controller vibrating and lighting in the 1 LED. However, I couldn't configure any of the buttons, and a jstest didn't react to any of the button presses. When I then rebooted my Pi, the connection was lost again.

I know this thread is about the Shanwan controllers, but it seems you have plenty of knowledge about the controllers, so I though it'd be worth a try to ask here anyway...

Thanks so much in advance. :)

luetzel

Hi @Hetoft,
all what I can say is that you should try to monitor the pairing process in order to identify the reason why it fails.
First of all, check the output of 'hciconfig', which should reveal something like this:

hci0:   Type: BR/EDR  Bus: USB
        BD Address: 00:1B:10:00:2A:EC  ACL MTU: 1017:8  SCO MTU: 64:1
        UP RUNNING PSCAN
        RX bytes:549 acl:0 sco:0 events:29 errors:0
        TX bytes:1564 acl:0 sco:0 commands:29 errors:0

If you don't see UP RUNNING PSCAN there is something wrong with your bluetooth device.

Next, watch what happens using 'sudo bluetoohctl' when you press the PS button:

[NEW] Controller 00:1B:10:00:2A:EC raspi5 [default]
[NEW] Device 01:B6:AD:7F:63:25 PLAYSTATION(R)3 Controller
[NEW] Device 01:B6:52:85:63:25 PLAYSTATION(R)3 Controller
[NEW] Device 20:73:AB:91:DD:6F Bluetooth V3.0 Keyboard
[CHG] Device 01:B6:52:85:63:25 Connected: yes

Check the connection status of your controller with info <hw address>

info 01:B6:52:85:63:25
Device 01:B6:52:85:63:25
        Name: PLAYSTATION(R)3 Controller
        Alias: PLAYSTATION(R)3 Controller
        Class: 0x000540
        Icon: input-keyboard
        Paired: no
        Trusted: yes
        Blocked: no
        Connected: yes
        LegacyPairing: no
        UUID: Human Interface Device... (00001124-0000-1000-8000-00805f9b34fb)
        Modalias: usb:v054Cp0268d0000

Lighting of LED1 on your device indicates that it is connected and paired with your Pi. If you're not able to configure buttons, check whether your controller was registered as an input device. 'dmesg' should display something like this:

[  482.434909] input: PLAYSTATION(R)3 Controller as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/bluetooth/hci0/hci0:11/0005:054C:0268.0001/input/input0
[  482.436176] sony 0005:054C:0268.0001: input,hidraw0: BLUETOOTH HID v0.00 Joystick [PLAYSTATION(R)3 Controller] on 00:1b:10:00:2a:ec

If it wasn't registered as an input device, you probably have to add the 'joydev' and 'uinput' kernel modules into your /etc/modules (reboot), or load them manually with

'sudo modprobe joydev'
'sudo modprobe uinput'

Cheers,
/luetzel

Wolfman100

Hey Grandmaster @luetzel !

Guess what?!My Shanwan controller broke....due to the crapy cheap lead it came with breaking the mini USB port pins!

So I bought another controller,and got it to pair no problem first time.........BUT.......now with this one I can't configure the buttons!Emulation Station detects the Gamepad but no button presses work for configuration.I have also checked 'jstest' and it seems to see all of the controllers various buttons,axis etc but doesn't respond (show any output) when I push the buttons while in 'jstest'.The same problem @Hetoft seems to be having.

As you seem to clearly be the bonafide expert in this PS3 controller drama any help would be very very well received!

Here is my 'dmesg' output:

[77212.502099] input: PLAYSTATION(R)3 Controller as /devices/platform/soc/3f201000.uart/tty/ttyAMA0/hci0/hci0:12/0005:054C:0268.0003/input/input4
[77212.508016] sony 0005:054C:0268.0003: input,hidraw2: BLUETOOTH HID v0.00 Joystick [PLAYSTATION(R)3 Controller] on b8:27:eb:a1:9b:7f

According to this it seems to see it as an input device...although 'input4' it seems.Could this be part of the issue you think?

BuZz

@luetzel - please consider styling your posts (eg using code blocks etc) http://commonmark.org/help/

Wolfman100

@BuZz NIce one @BuZz .Always wondered how people did that!

luetzel

@Wolfman100
sorry for my delayed answer. Did you try to remove the existing/ broken controller using bluetoothctl?

Meanwhile I have patched the latest bluez-5.40 release and pushed it to my github repo https://github.com/luetzel/bluez/tree/bluez-5.40

It compiled without errors and I successfully paired both of my PS3 clones at the same time.
According to 5.40's Changelog it fixes some issues "with previously paired devices" whatever that means.

Cheers,
/luetzel

Wolfman100

@luetzel no probs man!

Erm,I think I built a new system which I never paired the old (broken) controller with...as far as I can remember.

Do you think that it comes up as 'input4' could be an issue?Although strange that I don't get any response from button presses with 'jstest'.

'According to 5.40's Changelog it fixes some issues "with previously paired devices" whatever that means'

Hahah..mysterious!

I'll give the new patched bluez a go and see what happens on this never-ending quest to carry on my Donkey Kong adventures....

luetzel

@Wolfman100
No I don't think that 'input4' is a problem. My first controller pairs as input0, the second as input1 and so on. I guess that the numbering is related to the other input devices that are already paired when you connect your controller. My bluetooh keyboard appears as input2 and it doesn't really matter in what order I pair my devices.

Wolfman100

@luetzel OK, that makes sense.

I just got this error when doing the 'make -j3' for your Bluez 5.40.

monitor/main.c:36:28: fatal error: src/shared/tty.h: No such file or directory
 #include "src/shared/tty.h"
                            ^
compilation terminated.
Makefile:5663: recipe for target 'monitor/main.o' failed
make[1]: *** [monitor/main.o] Error 1
make[1]: *** Waiting for unfinished jobs....
Makefile:3129: recipe for target 'all' failed
make: *** [all] Error 2

luetzel

Hi @Wolfman100 ,
oops, sorry didn't notice that these files were missing after merging with the 5.40 branch.
Please clone the master branch (git clone https://github.com/luetzel/bluez) and try it again.
Should be fixed now.
Cheers,
/luetzel

Wolfman100

@luetzel Will do.Thanks my man.

Wolfman100

@luetzel

OK,so I got the Bluez Master to Make and Install fine.The controller Pairs no problem,but still can't configure controls.

Here is my 'dmesg' output...looks like the same controller is registered three times....could this be part of the issue?It looks like the same controller is simultaneously input 0,input 4 and input 5 at the same time.I saw you mentioned removing controllers earlier,how do I do this?

[  432.846781] usb 1-1.5: Product: PLAYSTATION(R)3 Controller
[  432.846794] usb 1-1.5: Manufacturer: SZMY-POWER CO.,LTD.
[  432.933985] input: SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:054C:0268.0003/input/input4
[  432.935581] sony 0003:054C:0268.0003: input,hiddev0,hidraw2: USB HID v1.11 Joystick [SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller] on usb-3f980000.usb-1.5/input0
[  434.086043] usb 1-1.5: USB disconnect, device number 9
[  434.533717] usb 1-1.5: new full-speed USB device number 10 using dwc_otg
[  434.636697] usb 1-1.5: New USB device found, idVendor=054c, idProduct=0268
[  434.636710] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  434.636717] usb 1-1.5: Product: PLAYSTATION(R)3 Controller
[  434.636724] usb 1-1.5: Manufacturer: SZMY-POWER CO.,LTD.
[  434.642275] input: SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:054C:0268.0004/input/input5
[  434.642785] sony 0003:054C:0268.0004: input,hiddev0,hidraw2: USB HID v1.11 Joystick [SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller] on usb-3f980000.usb-1.5/input0
[65756.104806] usb 1-1.5: USB disconnect, device number 10
[65767.938356] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[65767.938390] Bluetooth: HIDP socket layer initialized
[65767.942313] input: PLAYSTATION(R)3 Controller as /devices/platform/soc/3f201000.uart/tty/ttyAMA0/hci0/hci0:11/0005:054C:0268.0005/input/input6
[65767.943239] sony 0005:054C:0268.0005: input,hidraw2: BLUETOOTH HID v0.00 Joystick [PLAYSTATION(R)3 Controller] on b8:27:eb:a1:9b:7f
[65814.026297] Console: switching to colour frame buffer device 240x67
[65818.343306] Console: switching to colour dummy device 80x30

Wolfman100

On a side-note,other useful threads for conquering PS3 Controller Issues:

Link 1
Link 2