Need Help With DOSBOX

mediamogul

@edmaul69

Hey, we tried to reach you.

0_1525065524670_8790aa5c-4e5b-4180-939d-46e9675b672a-image.png

quicksilver

@edmaul69 going to try this out when I get off work. Thanks!

Brigane

@quicksilver said in Need Help With DOSBOX:

@edmaul69 going to try this out when I get off work. Thanks!

If this works out for you please post the solution here. I've been struggling with this french language problem myself and never found a solution.

edmaul69

@quicksilver can you post the [autoexec] section of your .conf file?

quicksilver

@edmaul69 I will when I get home. I should use the one that came with the game right? Not a copy of the generic one that retropie uses?

edmaul69

@quicksilver yes you use the one that came with the game. And that is the one i need the autoexec part of. If you post it i might be able to make you a correct .sh file that doesnt need the .conf file.

quicksilver

@edmaul69 Success! You are the man!

# Lines in this section will be run at startup.
@echo off
mount c "/home/pi/RetroPie/roms/pc/"
imgmount d "/home/pi/RetroPie/roms/pc/LBA2/LBA2.DAT" -t iso
c:
cls
cd LBA2
LBA2.EXE
exit

This is what I used to get it to work. I had to use/duplicate the default dosbox.conf file included with retropie to get the keyboard to work properly.

quicksilver

@brigane

To get the game to work properly I created the shell script below and placed it in my /roms/pc folder

#!/bin/bash 
/opt/retropie/emulators/dosbox/bin/dosbox -conf "/home/pi/RetroPie/roms/pc/LBA2/dosboxLBA2.conf"

then I copied the default dosbox config located here:

/opt/retropie/configs/pc/dosbox-SVN.conf

to my LBA2 directory located in my /roms/pc folder, renaming it dosboxLBA2.conf

At the bottom of the .conf file is a section labled: [autoexec]

Place this right below it:

# Lines in this section will be run at startup.
@echo off
mount c "/home/pi/RetroPie/roms/pc/"
imgmount d "/home/pi/RetroPie/roms/pc/LBA2/LBA2.DAT" -t iso
c:
cls
cd LBA2
LBA2.EXE
exit

If you want to change the language options you can edit the LBA2.CFG

edmaul69

@quicksilver actually nothing special with this game unlike some from gog.com. the problem you had is that you switched to the d: drive instead of the c: drive. so this should work just fine

/opt/retropie/emulators/dosbox/bin/dosbox -c "mount c /home/pi/RetroPie/roms/pc/" -c "imgmount d /home/pi/RetroPie/roms/pc/LBA2/LBA2.dat -t iso" -c "c:" -c "cd /LBA2/" -c "LBA2.EXE" -c "exit"

quicksilver

@edmaul69 yea I realized my mistake shortly after my original post. But even switched to c: it still has the wrong language selected. Oh well, your original solution worked just fine so I'll stick with it. I have tried and given up on this game so many times in the past. And I have finally gotten it working thanks to you!

edmaul69

@quicksilver actually i did make a correction to what you originally had. You set /pc/LBA2/ as the c: drive and i changed it to just /pc/ . That is most likely the reason for the language issue there.

sherif02

@quicksilver Man, please help me to start LBA2 under retropie/ I have gog version too

quicksilver

@sherif02 did you follow my instructions above? Dosbox can launch .conf files directly now so you don't even need to make a .sh script.

Just copy the default dosbox .conf file to your PC folder (you can rename it lba2 or whatever you want). Then copy/paste the autoexec instructions to the bottom of that file and it should work.

Can you tell me specifically what isn't work for you/how far you've gotten?

Efriim

@quicksilver
Is it a good game? Should I play the first one first? What would you compare it to? What does it remind you of? Does it perform well on the pi?

Can we start a dosbox configurations and compatibility in your thread? There were some patch files for compiling with dosbox to add multiprocessor-multithreading and joypad mouse control, do you believe these patches will work with a ARM build?

quicksilver

@Efriim I would probably start a new thread to discuss general dosbox stuff/compatibility.

I never played the first game but it's not necessary in order to enjoy the second. There are a few references to the first game but nothing they don't recap at the beginning. The first game from what I understand is a little more linear in it's level design whereas lba2 is a pretty big open world. I would describe the game as a 3d adventure/puzzle solving game. The control scheme is definitely dated by now days standards but the game is a lot of fun and has a lot of charm. You'll need a pi3 to run it well, my pi2 can run it but there is a fair amount of slowdown. The game was designed for Windows 95 but also ran fully on dos with full voiceovers and CD quality music. It may be one of the most advanced games that can be run through dosbox at least I can't think of any others off the top of my head.

I have not messed with those patches, game runs well enough for me that I don't think they are needed unless you really don't want to play with a keyboard.

Efriim

@quicksilver this absolutely makes me want to fix my dos desktop. I don't know whats wrong with it, I had not used it for a long time and I plugged it in and there is no bios or boot time. I checked the pins, I should reseat the celeron, and probably find some new ram (at least one of the sticks should be good right?).

Actually I rescued her at the garbage dump. Unfortunately I think the celeron is dead, the heatsink was not seated properly, I probably applied thermal compound while I had some at hand, and then didn't notice.

Efriim

@quicksilver

The Elder Scrolls II: Daggerfall is an advanced game that works in dosbox.
It is free to download from bethesda since the 15th anniversary
https://en.uesp.net/wiki/Daggerfall:Files
https://elderscrolls.bethesda.net/en/daggerfall/
They had morrowind:complete free to aquire until the end of march for the TES 25th anniversary.
Unfortunately I was too late.

It is easiest to download the DaggerfallSetup.exe which includes every patch(optional) from uesp and install that then transfer.

Here is a config

#extended memory
memsize  = 64
#Mixer
rate      = 44100
blocksize = 2048
prebuffer = 80

# Lines in this section will be run at startup.
@echo off
mount c "/home/pi/RetroPie/roms/pc/Daggerfall" # or change the path in Z.CFG
c:
cls
#cd DAGGER~1
fall.exe z.cfg 
Exit

In game settings:
change the mouse controls; horizontal down 2 ticks and vertial increment 2 ticks.
Controls:
The game uses Fkeys, F5 for Character F6 for inventory. R to rest, J to jump, D to crouch
To Swing your weapon hold the right mouse button and move it across the screen slamming down on the enemy.
Hint:
Thrusting your sabre in an upwards manner has an increased chance to strike.
Warning:
The game is pretty hard, save often, if you get stuck in a wall, door, chair, whatever press ALT+F11 until you are free.

sherif02

@quicksilver Man, gorgeous big thanks to you! I finaly start most loved game from my childhood! But one thing work not wery good - i change game voices to russian language by overwrite files in VOX folder - but after restart in that path i see no my files, but original english file. how to not able game to rewrite my files? text files in the base folder of game not rewrited

quicksilver

@sherif02 make sure that your Russian language files have the right file names and proper permissions.

sherif02

@quicksilver filenames proper, because all works in translation untill first reboot. what permission set to this files, for set them not overwritable? and one more, i think - last thing - how to play not with keyboard but with joystick