SHANWAN / PS3 CONTROLLER Pi3 RETROPIE 3.6 BLUETOOTH SETUP

Wolfman100

@luetzel ooooohhhh no...here we go again!

My distribution is OSMC,RetroPie is installed as RetrOSMC.

ANy idea what the 'usb_claim_interface: operation' is?I'm assuming it's for Sixpair to read the USB input?

Wolfman100

@Wolfman100 erm......feel like an idiot.Was missing root permission.

sudo sixpair

fixed it:

Current Bluetooth master: b8:27:eb:a1:9b:7f
Setting master bd_addr to b8:27:eb:a1:9b:7f

Still not playing ball though.Pairs fine...no response in JsTest

Wolfman100

After doing some further research some people are suggesting that the package 'raspberrypi-sys-mods' is required.

When attempting to install the package however it cannot be found:

osmc@osmc:~$ sudo apt-get install raspberrypi-sys-mods
Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Unable to locate package raspberrypi-sys-mods

luetzel

@Wolfman100
IMHO the package raspberrypi-sys-mods doesn't exist on osmc. You have to add the Raspbian repo to your apt sources.list in order to install it.

Your problem might be related to the fact, that Kodi 16 indeed blocks input for joypads if it doesn't run on x11.
(https://discourse.osmc.tv/t/osmc-kodi-16-with-usb-gamepad-support-wired/15610/3)

Wolfman100

@luetzel I've only ever been using Kodi 16 and the other controller worked fine.ALso RetroPie detects the pad but just doesn't respond to any input.....why oh why is this all such a nightmare?

I think that link is also just referring to people using a controller to control Kodi,which makes sense.I am however trying to use the controller within RetroPie which is running on OSMC,something which worked flawlessly before thanks to your knowledge and extended help.

Wolfman100

@luetzel I'm just curious as to what info 'dmesg' is showing me as I seem to have multiple controllers listed..even though only 1 controller is paired.

Is it showing me all previous pairings with the bottom one being the latest or does it actually think all these controllers are paired?

[12170.360531] input: SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:054C:0268.0004/input/input5
[12170.361526] sony 0003:054C:0268.0004: input,hiddev0,hidraw3: USB HID v1.11 Joystick [SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller] on usb-3f980000.usb-1.5/input0
[12170.366265] sony 0003:054C:0268.0004: controller with MAC address 00:26:5c:02:54:d2 already connected
[12170.457759] sony: probe of 0003:054C:0268.0004 failed with error -17
[12170.797258] usb 1-1.5: reset full-speed USB device number 9 using dwc_otg
[12170.902410] input: SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:054C:0268.0005/input/input6
[12170.902969] sony 0003:054C:0268.0005: input,hiddev0,hidraw3: USB HID v1.11 Joystick [SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller] on usb-3f980000.usb-1.5/input0
[12170.910047] sony 0003:054C:0268.0005: controller with MAC address 00:26:5c:02:54:d2 already connected
[12170.987833] sony: probe of 0003:054C:0268.0005 failed with error -17
[12340.271469] usb 1-1.5: USB disconnect, device number 9
[12346.188954] Console: switching to colour frame buffer device 240x67
[12380.448652] usb 1-1.5: new full-speed USB device number 10 using dwc_otg
[12380.551651] usb 1-1.5: New USB device found, idVendor=054c, idProduct=0268
[12380.551676] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[12380.551690] usb 1-1.5: Product: PLAYSTATION(R)3 Controller
[12380.551704] usb 1-1.5: Manufacturer: SZMY-POWER CO.,LTD.
[12380.560119] input: SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:054C:0268.0006/input/input7
[12380.561134] sony 0003:054C:0268.0006: input,hiddev0,hidraw3: USB HID v1.11 Joystick [SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller] on usb-3f980000.usb-1.5/input0
[12380.566278] sony 0003:054C:0268.0006: controller with MAC address 00:26:5c:02:54:d2 already connected
[12380.629358] sony: probe of 0003:054C:0268.0006 failed with error -17
[12380.980800] usb 1-1.5: USB disconnect, device number 10
[12385.308691] usb 1-1.5: new full-speed USB device number 11 using dwc_otg
[12385.411671] usb 1-1.5: New USB device found, idVendor=054c, idProduct=0268
[12385.411699] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[12385.411713] usb 1-1.5: Product: PLAYSTATION(R)3 Controller
[12385.411727] usb 1-1.5: Manufacturer: SZMY-POWER CO.,LTD.
[12385.422758] input: SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:054C:0268.0007/input/input8
[12385.423867] sony 0003:054C:0268.0007: input,hiddev0,hidraw3: USB HID v1.11 Joystick [SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller] on usb-3f980000.usb-1.5/input0
[12385.427672] sony 0003:054C:0268.0007: controller with MAC address 00:26:5c:02:54:d2 already connected
[12385.489461] sony: probe of 0003:054C:0268.0007 failed with error -17
[12385.589582] usb 1-1.5: USB disconnect, device number 11
[12393.248811] usb 1-1.5: new full-speed USB device number 12 using dwc_otg
[12393.351722] usb 1-1.5: New USB device found, idVendor=054c, idProduct=0268
[12393.351746] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[12393.351761] usb 1-1.5: Product: PLAYSTATION(R)3 Controller
[12393.351775] usb 1-1.5: Manufacturer: SZMY-POWER CO.,LTD.
[12393.358167] input: SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:054C:0268.0008/input/input9
[12393.359260] sony 0003:054C:0268.0008: input,hiddev0,hidraw3: USB HID v1.11 Joystick [SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller] on usb-3f980000.usb-1.5/input0
[12393.364224] sony 0003:054C:0268.0008: controller with MAC address 00:26:5c:02:54:d2 already connected
[12393.430074] sony: probe of 0003:054C:0268.0008 failed with error -17
[12393.818695] usb 1-1.5: reset full-speed USB device number 12 using dwc_otg
[12393.923265] input: SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:054C:0268.0009/input/input10
[12393.923847] sony 0003:054C:0268.0009: input,hiddev0,hidraw3: USB HID v1.11 Joystick [SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller] on usb-3f980000.usb-1.5/input0
[12393.926770] sony 0003:054C:0268.0009: controller with MAC address 00:26:5c:02:54:d2 already connected
[12393.989110] sony: probe of 0003:054C:0268.0009 failed with error -17
[12401.719666] usb 1-1.5: USB disconnect, device number 12
[12576.392050] Console: switching to colour dummy device 80x30
[12760.660544] usb 1-1.5: new full-speed USB device number 13 using dwc_otg
[12760.763574] usb 1-1.5: New USB device found, idVendor=054c, idProduct=0268
[12760.763594] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[12760.763601] usb 1-1.5: Product: PLAYSTATION(R)3 Controller
[12760.763608] usb 1-1.5: Manufacturer: SZMY-POWER CO.,LTD.
[12760.772517] input: SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:054C:0268.000A/input/input11
[12760.773107] sony 0003:054C:0268.000A: input,hiddev0,hidraw2: USB HID v1.11 Joystick [SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller] on usb-3f980000.usb-1.5/input0
[12765.571291] usb 1-1.5: USB disconnect, device number 13
[12777.116556] input: PLAYSTATION(R)3 Controller as /devices/platform/soc/3f201000.uart/tty/ttyAMA0/hci0/hci0:11/0005:054C:0268.000B/input/input12
[12777.117278] sony 0005:054C:0268.000B: input,hidraw2: BLUETOOTH HID v0.00 Joystick [PLAYSTATION(R)3 Controller] on b8:27:eb:a1:9b:7f
[18743.151135] usb 1-1.5: new full-speed USB device number 14 using dwc_otg
[18743.254181] usb 1-1.5: New USB device found, idVendor=054c, idProduct=0268
[18743.254204] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[18743.254219] usb 1-1.5: Product: PLAYSTATION(R)3 Controller
[18743.254233] usb 1-1.5: Manufacturer: SZMY-POWER CO.,LTD.
[18743.261442] input: SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:054C:0268.000C/input/input13
[18743.262470] sony 0003:054C:0268.000C: input,hiddev0,hidraw3: USB HID v1.11 Joystick [SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller] on usb-3f980000.usb-1.5/input0
[18743.265326] sony 0003:054C:0268.000C: controller with MAC address 00:26:5c:02:54:d2 already connected
[18743.391744] sony: probe of 0003:054C:0268.000C failed with error -17
[18757.767103] usb 1-1.5: USB disconnect, device number 14
[18931.445185] input: PLAYSTATION(R)3 Controller as /devices/platform/soc/3f201000.uart/tty/ttyAMA0/hci0/hci0:12/0005:054C:0268.000D/input/input14
[18931.446160] sony 0005:054C:0268.000D: input,hidraw2: BLUETOOTH HID v0.00 Joystick [PLAYSTATION(R)3 Controller] on b8:27:eb:a1:9b:7f
[34956.003483] usb 1-1.5: new full-speed USB device number 15 using dwc_otg
[34956.106519] usb 1-1.5: New USB device found, idVendor=054c, idProduct=0268
[34956.106543] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[34956.106558] usb 1-1.5: Product: PLAYSTATION(R)3 Controller
[34956.106572] usb 1-1.5: Manufacturer: SZMY-POWER CO.,LTD.
[34956.115721] input: SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:054C:0268.000E/input/input15
[34956.116737] sony 0003:054C:0268.000E: input,hiddev0,hidraw2: USB HID v1.11 Joystick [SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller] on usb-3f980000.usb-1.5/input0
[34970.493506] usb 1-1.5: reset full-speed USB device number 15 using dwc_otg
[34970.598603] input: SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:054C:0268.000F/input/input16
[34970.600591] sony 0003:054C:0268.000F: input,hiddev0,hidraw2: USB HID v1.11 Joystick [SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller] on usb-3f980000.usb-1.5/input0
[34989.904410] usb 1-1.5: USB disconnect, device number 15
[34998.314182] input: PLAYSTATION(R)3 Controller as /devices/platform/soc/3f201000.uart/tty/ttyAMA0/hci0/hci0:11/0005:054C:0268.0010/input/input17
[34998.318316] sony 0005:054C:0268.0010: input,hidraw2: BLUETOOTH HID v0.00 Joystick [PLAYSTATION(R)3 Controller] on b8:27:eb:a1:9b:7f
[35166.544150] Console: switching to colour frame buffer device 240x67
[35173.080763] Console: switching to colour dummy device 80x30
[76617.617262] usb 1-1.5: new full-speed USB device number 16 using dwc_otg
[76617.720400] usb 1-1.5: New USB device found, idVendor=054c, idProduct=0268
[76617.720420] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[76617.720427] usb 1-1.5: Product: PLAYSTATION(R)3 Controller
[76617.720435] usb 1-1.5: Manufacturer: SZMY-POWER CO.,LTD.
[76617.727744] input: SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:054C:0268.0011/input/input18
[76617.728811] sony 0003:054C:0268.0011: input,hiddev0,hidraw2: USB HID v1.11 Joystick [SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller] on usb-3f980000.usb-1.5/input0
[85172.076429] usb 1-1.5: USB disconnect, device number 16
[85181.169858] input: PLAYSTATION(R)3 Controller as /devices/platform/soc/3f201000.uart/tty/ttyAMA0/hci0/hci0:12/0005:054C:0268.0012/input/input19
[85181.170671] sony 0005:054C:0268.0012: input,hidraw2: BLUETOOTH HID v0.00 Joystick [PLAYSTATION(R)3 Controller] on b8:27:eb:a1:9b:7f

Wolfman100

More investigation:

Although the PS3 controller is paired with OSMC I don't think it's pairing with Bluez:

[PLAYSTATION(R)3 Controller]# disconnect
Attempting to disconnect from 00:26:5C:02:54:D2
Successful disconnected
[CHG] Device 00:26:5C:02:54:D2 Connected: no
[CHG] Device 00:26:5C:02:54:D2 Connected: yes
[PLAYSTATION(R)3 Controller]# paired devices
Invalid command
[PLAYSTATION(R)3 Controller]# paired-devices
Device CC:C5:0A:1F:F6:C3 Bluetooth 3.0 Macro Keyboard
[PLAYSTATION(R)3 Controller]# paired-devices
Device CC:C5:0A:1F:F6:C3 Bluetooth 3.0 Macro Keyboard
[PLAYSTATION(R)3 Controller]# devices
Device CC:C5:0A:1F:F6:C3 Bluetooth 3.0 Macro Keyboard
Device 00:26:5C:02:54:D2 PLAYSTATION(R)3 Controller
[PLAYSTATION(R)3 Controller]# pair
Attempting to pair with 
Failed to pair: org.bluez.Error.AuthenticationFailed
[PLAYSTATION(R)3 Controller]#

I disconnectd the controller using 'bluetothctl' and then reconnected it.It is stated as 'connected' but NOT paired.When attempting to pair it with 'bluetoothctl' it fails to pair:

[PLAYSTATION(R)3 Controller]# pair
Attempting to pair with 
Failed to pair: org.bluez.Error.AuthenticationFailed

Although it is shown as paired with OSMC network settings.

luetzel

Hi @Wolfman100,
the output of bluetoohctl can be quite confusing, even when my controller is paired (LED1 on), the device info of bluetoohctl still shows 'Paired: no'. I'm not worried about that, although this information is somewhat misleading.

There seems to be a difference between your broken Shanwan controller and your new one. In contrast to the old PS3 controller, it is recognized as SZMY-POWER CO.,LTD. PLAYSTATION(R)3 Controller. My Google search for SZMY-POWER points into the direction, that the D-Pad and both analog sticks of your controller are being registered as separate joysticks, i.e. for each axis a new [...]/input? device is created. This does not happen with the Shanwan controller. Here we have a single [...]/input? device assigned.

I don't think that your issue is related to bluez or pairing, but it must happen downstream of the pairing event. I'm not sure what exactly generates the input devices (udev rule?), but I believe that it must be the key to solve your problem.

Wolfman100

@luetzel Ohhhh...that seems quite strange.Yes the controller doesn't appear to be a straight Shanwan copy and behaves a bit differently,for example it flashes when battery level is low,which is something the Shanwan never did.

The input thing is kind of confusing,as if it was making a different input for each axis wouldn't Emulation Station see these inputs as separate controllers rather than just one controller.Also wouldn't 'Jstest' also give some feedback regardless?

I created a 'udev' rule as recommended to do so by @buzz,but I'm not really entirely sure what a 'udev' rule actually does.

trevevs

@luetzel said in SHANWAN / PS3 CONTROLLER Pi3 RETROPIE 3.6 BLUETOOTH SETUP:

sorry that the link to my blog did not work for you! Hope that you are able to pair your PS3 clone now. My blog is on a self-hosted server, consisting of a Banana Pi. It connects via dyndns, so that it is occasionally not reachable when my IP changes.

@luetzel no probs mate I got there in the end!

@Wolfman100 na turns out I was missing libical as per https://discourse.osmc.tv/t/howto-retrosmc-retrogaming-on-osmc/6671/920 I did get it working for a little while! Now Im having dramas after it seems I paired the 2nd shanwan. Seems ok in emu station, but when I load an emulator like mame the controller seems to get confused and re-pairs to player 2 or 3 and doesnt work anymore. Ive deleted the pairing of both and trying to find some time to try re-pair them. Anything else I need to do? Like to I need to manually delete ps3 pl1 + pl2 config file or something? I was thinking my mistake may have been using the same Pi3 USB port to pair each? Maybe I should have done pl1 on port 0 & pl2 on port 1 perhaps??

Smithers

Hi Wolfman100.

Just wondered if you have got any further in setting up your pad? I too have bought a pair of the 'SZMY-POWER' pads thinking that they were the normal Shanwan / Gasia, but they are not.

I have followed your guide @luetzel (thanks!) and it all seems to work great from the outset, ie the pads will pair up as expected and player 1 and player 2 LED's light up correctly on every boot.... but... I get no input reading when running jtest and RetroPie does not capture any input either. I have also tried evtest but no events are being captured either.

I have created a Udev rule (both manually as described by Buzz and also through the RetroPie setup script), but still no inputs being detected on either pad (I have also tried each pad individually).

I am at a loss now - is there anything else I could try to get these pads working? Everything regarding pairing is working excellent, just can't get any input to register. :( Has anyone else had success with these particular 'SZMY-POWER' pads? Here is a link to the pad itself and they are branded as 'PowerRider': http://www.amazon.co.uk/dp/B01HI4BAW2

I am using the v4b2 image downloaded from here and have upgraded via setup script to v4RC1.

Thanks all for the tips so far! :)

luetzel

Hi @all

a bug-fix of Bluez (5.41) was released on 19th of July. I synced it with the patched version for Gasia/Shanwan clones (https://github.com/luetzel/bluez). Compiled without errors/warnings on the latest Raspbian. Can't tell if it works for the SZMY-POWER pads, please check it out ...

Cheers,
/luetzel

Smithers

@luetzel thanks for the update. I will give this a try tomorrow and report my findings. :)

Wolfman100

Hi @Smithers ,

Unfortunately I haven't got any further with this as I needed to take a break from it before I completely lost my mind wasting so much time trying to get these pads working.

It seems that you are experiencing exactly the same issue as I am,having no problems pairing the controller...but no input being registered.

I may endevour in the next 24 hours to attempt to get this working....again!

dmt408

@luetzel I tried it with their update and was unable to get it to work with the SZMY-POWER controllers

Wolfman100

@dmt408 @Smithers

As far as I'm aware ,I have already tried getting the SZMY-POWER controllers working with the latest bugfixed Bluez 5.41 with unfortunately no success.

Still no input registered in JStest

Smithers

Hi.

Ok so I have some good news - I have got my SZMY-POWER pads working!

I had made a backup prior to the first attempt with Bluez so I restored from that and tried the new version of Bluez from @luetzel , followed your guide again to completion BUT, this time it won't recognise my pad via Bluetooth? So last time it would pair multiple pads but wouldnt capture any inputs / events, but this time it won't pick the SZMY pad up via Bluetooth at all? Sixpair appears to work, in that it recognises the bluetooth address and sets it as expected, its just the bluetooth pairing that doesnt work.

So - I restored the image again to back before Bluez was installed, I then carried out a full update through RetroPie Setup Script (took quite a while as it was building a new version of MAME), and then went straight in to set up the PAD via the RetroPie script, chose 'Gasia Only' support..... and it worked first time! So I have now paired 2 SZMY pads and 1 'Genuine Gasia' pad (I bought a pair when I thought the SZMY pads wouldnt work), and they are all working fine and can work together at the same time. The only issue I can see is that the LED's all display as Player 1, which they are not (I get JS0, JS1 & JS2 in JSTEST when they're all connected and each of them work independently), but that is something that I can live with.

I would love to say that there was a specific thing I tried, but all I done was try again through the setup script, chose Gasia only, and it worked. I have rebooted about 20 times since and it works on every reboot. All I could suggest is that you update, try again and see if it works for you? If I can share the driver that is installed somehow then I will, just let me know how to do that.

Good luck all - incidentally if anyone knows how to get around the 'Player 1 LED' issue then I'm all ears, but its not a problem as such in fairness.

Wolfman100

@Smithers Good Work and great News!I presume this was born out of some random experimentation,as all great solutions seem to be...

I will look into this shortly and see if theirs a clearly replacteable way to get this working.

I think it may soon be useful to start a new thread which in some way summarises what's required for replica and non-replica PS3 controller pairing and break it down for each one of the replica types we've come across.I think this would help quite a few people out.

Wolfman100

@Smithers I can report that I have updated RetroPie and I have removed all other PS3 pairing configs etc and just installed just Gasia support and still no response from buttons.

I think this is however due to Bluez and Sixad still being installed as in @luetzel's guide.I think I will have to remove these first.

Wolfman100

@Smithers @dmt408 @luetzel

I can now happily confirm that I have managed to get the SZMY-POWER pad working.I am not sure exactly WHAT process has managed to get this working.But it is definitely one of the following:

Removing all PS3 drivers
Updating RetroPie
Installing the Gasia Only Driver

Access :

cd /usr/sbin/

and then change permissions:

sudo chmod 755 sixad-sixaxis

Restarting Sixad Daemon:

sudo /etc/init.d/sixad restart

Then when at the Emulation Screen where it says 1 Gamepad detected it seemed to register but only if I held the right thumb button down...which is a bit weird,but then it went to the next stage to configure the buttons and they all registered and configured without an issue.

The only drawback now being that when I restart RetroPie it goes straight past the Emulation Station screen into RetroPie and the controller doesn't do anything anymore.

Steps closer...