TurboTwist 2 spinner for retropie.
-
@caver01 Of course, if your spinner is plugged into the interface board and uses the Y pins, well, you will have to flip-flop the mapping like this:
input_map[p1_dialx] mouse[0,y] mouse[1,y] mouse[2,y]Get it?
You don't technically need to do the input_map for all three, but until you know it works and which mouse number represents your spinner, it's easier just to map all three. Advance MAME binaries includes a mouse testing utility called
advmbut I don't know if it is included on RetroPie, or where it lives if it is there. -
@caver01 You should be a teacher. Now I understand the logic. Right now I am installing my Retropie from my 30gb back up file. As soon as it is done, I will do exactly what you wrote and hopefully it will work. I'll let you know.
-
Omg! It's working now. You just made my day... You have 3 wishes to ask from me. Retropie should put this one as a mouse or spinner documentation on their website if there is none. I can't say enough thank you for your effort. Someday I am planning to make a complete video and documentation in my native language (Turkish) and put it on youtube since there is none. I am sure somebody will benefit from it. Oh, I will show you the final version of my bartop when I finish it. Thanks a lot again. Take care.
-
@hakan1708 The nice thing about RetroPie is that everyone brings a different set of skills, experience, AND HARDWARE to the project. From portable devices to full-sized arcade cabinets and everything in between, we have a broad range of devices out there. However, it seems that spinners and trackballs have fewer users. However, I understand that lr-mame2003 may soon have usable mouse support, so when that happens, I will definitely be looking into it.
I should probably write a wiki document explaining all of this for AdvanceMAME anyway.
-
@caver01 Wiki page would be awesome. My Spinner is working just fine in advancemame, I just have to find working rom sets for it. Legal rom sets ;)
-
@hakan1708 Glad it's working. One way to push the limits is to give it a HUGE SPIN and see what happens. You may want to update the mouse polling rate as described in my post that you linked to in your first post here. Then, you can adjust the sensitivity in the MAME GUI to make it work the way you expect. You should not have get backspin when you give it a really fast spin. That can happen if the sensitivity or polling rate isn't optimal.
On some games, it may be appropriate to make adjustments. For example, driving games may require a different sensitivity than Tempest, or Arkanoid.
-
Actually spinner is very responsive. When I give a huge spin, game doesn't go out of control which is good too. Do you recommend any driving game rom that works? I put a F1 Grand Prix Star II driving game, it works with joystick but doesn't work with spinner. Is there anyway to make these games work?
-
@hakan1708 said in TurboTwist 2 spinner for retropie.:
@caver01 Wiki page would be awesome.
I'll second that, your "institutional knowledge" on AdvMAME is a tremendous asset and should be archived for all of time! ;)
I'll keep AdvMAME for the vector games alone and FBA as it seems so optimized for performance but I hope to center my main arcade experience around lr-mame2003 as Dank has fixed pretty much everything on my check list to make it a go.
I think mame4all-pi will be around a long time on merit alone. It works, it's solid, it's small and it covers the "golden era" perfectly not to mention it's been ported to almost every platform. It was sneaked (not snuck? ;) through even on iTunes for about a day and I grabbed a copy before they pulled it due to a terms of agreement violation. I think they had another called Gridlee that was based on 0.139 too but didn't get that one. How they get them through I don't know but they pull them as fast as they publish them. :)
-
@hakan1708 You can try Pole Position, Turbo, Super Sprint and even Ivan "Ironman" Stewart's Super Off Road. I also have tried old school Night Driver with success.
-
@hakan1708 As far as games that don't seem to work, take a look in MAME GUI and see what THIS GAME controls are listed. It may not be a DIAL input, and if that's the case, you can head back into your .rc file and find the corresponding input and set it up too.
-
@Riverstorm I picked up both iMAME and Gridlee, but I can't add games to these anywhere since Apple locked down access to the subfolders where you would need to drop roms. Unless they can look at the Documents folder. It has been a while since I tried.
I also have the Best Of FTA AppleII emulator on the iPad, but this too requires you to have edit access to sub folders within the app. I could jailbreak, but I can't be bothered by that. I would rather spend time configuring the Pi.
-
@caver01 said in TurboTwist 2 spinner for retropie.:
I can't be bothered by that. I would rather spend time configuring the Pi.
Yeah I tell myself no more and I find myself doing one thing more with RetroPie. I'm not sure as it's been a while for me too but I am using an iPad Air 128GB and it's fully loaded with the complete ROM set and working fine. I think you have to jump through some extra hoops to get at it but it's still possible.
I usually have no issues hacking everything but for some reason I was never compelled to jailbreak an iPad. I thought about it once when I heard ScummVM is workable but also read the on-screen interface was a bit wonky or something. I like the iDevices and have the whole family from the iPad down to the Nano but still prefer a good old fashioned PC. :)
-
@Riverstorm I have the Griddle :) I play sometimes.
-
@caver01 I don't have jailbreak phone but if you use ifunbox you can access your phone apps' folder.
-
@caver01 Thanks. I'll sure play with it.
-
@hakan1708 said in TurboTwist 2 spinner for retropie.:
@caver01 I don't have jailbreak phone but if you use ifunbox you can access your phone apps' folder.
Yes, but does it let you open the apps themselves? That's the barrier I was running into. It's not enough to see the list of apps. You have to open them and put ROMs into the iMame (or Gridlee) documents sub-folder. If I recall, apple locked this down so you can't get in that deep, but it has been a while since I tried. Maybe the tools are better now.
-
Yes. If you open it with ifunbox, it lets you go to the folder structure and you can copy and paste your roms to the folder.
-
@caver01 ,
Can you tell me where this .rc file is? Is that the full name of the file that I need to edit?
My turbo twist 2 is also not working. I have tried it at the command prompt and it is functioning there.Thanks for all of your help.
-
@WoodChucksCNC The config files for each version of AdvanceMAME installed by RetroPie are located here:
/opt/retropie/configs/mame-advmame -
Thanks for this awesome post. I found it via google search and it allowed advmame to work with a TT2 spinner.
BUT I still haven't found an answer for how to get a spinner to work with other Retroarch platforms like NES or Atari 2600.
Is there a way to get a spinner/mouse to work with Atari 2600....for games like Kaboom, Super Breakout, and the homebrew Stunt Cycle.
Thanks in advance for your assistance.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.