OpenBOR finally working fine on RETROPIE with ES

[cyperghost]

@cyperghost @BiZzAr721 I updated post

[darknior]

@cyperghost said in OpenBOR finally working fine on RETROPIE with ES:

openbor = "pushd /opt/retropie/ports/openbor; /opt/retropie/ports/openbor/OpenBOR %ROM%; popd"
ob_6xxx = "pushd /home/pi/openbor_openbeta; LIB_FB=3 /home/pi/openbor_openbeta/OpenBOR %ROM%; popd"
default = "openbor"

I don't know this parameter, why do you use LIB_FB=3 ? I don't use it and it works fine for me on many games ...

So I have 2 versions available. The old 3400 and the new 6312. The 6312 is much much better than the old one.

Yes for sure, the 6312 version is fantastic, almost all my games are working fine with it :)
I"m also using 4.3 Retropie in production, and you are right for Asterix it works fine.
For the moment i only use the 3400 for Bare Knuckle 6 that not start with 6312. But my version also crash with 3400 at some moment ...

• For the moment i only have a big problem with TMNT Shell Shocked rev5852 that use i think so many scripts and is really slow when enemies come :(
• Rumble not working too
• Filters are really slow too without OpenGL

[cyperghost]

@darknior said in OpenBOR finally working fine on RETROPIE with ES:

I don't know this parameter, why do you use LIB_FB=3 ? I don't use it and it works fine for me on many games ...

You can setup GL4ES with a variaty of setup variabels. and it is adviced for Raspberry to use LIB_FB=3 mode.

Filters are really slow too without OpenGL

That's the point but it is not a disadvantage because older versions was much much slower if you compare to this one. But it would be nice if @zanac would tell us if it is possible in Pandora to switch from SDL to openGL in video options. In Raspberry this is not possible ... I know it works for Windows PCs.
If you compare to old 3400 this version gots a huge speedup with much better looking graphics. So I'm really satisfied with the outcome and I think we can write a scriptmodule for this (therefore I needed the blank 4.4 image to determine which dependencies should be installed).

So the scriptmodule will install dependencies, will download github branch. Patch it with newest patchset (galina at the moment), will copy gl4es libary from git (or maybe compile also?). Setup links and then we are ready to go.

[BiZzAr721]

@cyperghost said in OpenBOR finally working fine on RETROPIE with ES:

You can setup GL4ES with a variaty of setup variabels. and it is adviced for Raspberry to use LIB_FB=3 mode.

Should it be LIBGL_FB=3? Also, using this I am still not able to switch from SDL to GL in video options but it is working behind the scenes, correct?

Both versions gave me no issues or crashes while messing around with settings! I had to rename configs by just removing the .bor before .cfg. It seems 3400 configs work well on newest version, but not vice versa, but it is late and may have just been human error.

@darknoir I'm playing TMNT Shell Shocked Rev 5853 and it has been playing very well so far (one player). I just learned that pressing block with a Rock Soldier cycles weapons! Haven't tried He-Man recently but that will be the true test.

[darknior]

@bizzar721 & @cyperghost i have create a new topic : https://retropie.org.uk/forum/topic/19432/openbor-3400-6315-game-list-compatibility

[shavecat]

How can i fix games like -
G.I JOE and HE-MAN ?
that are not working .
Tx

[cyperghost]

@shavecat said in OpenBOR finally working fine on RETROPIE with ES:

How can i fix games like -
G.I JOE and HE-MAN ?

There is no fix needed - these are working.
Maybe you did a wrong install of OpenBOR or use depricated versions of these mods you named.

As you used a thread that discusses deprecated OpenBOR versions I assume you did wrong setup of OpenBOR - READ MORE ABOUT HERE

[shavecat]

@cyperghost
most of the games works (not on .PAK on .BOR)
but those for example just quit when i start them,
and yeha the work on my computer.

[cyperghost]

@shavecat well you are using an old version of OpenBOR engine. Please forget these .bor-things they are not needed anymore. Follow the link and use updated OpenBOR engines. These will run your mods in PAK format

[shavecat]

@cyperghost
yeha ! thanks ! :)
which link by the way ;)?

[cyperghost]

@shavecat
https://retropie.org.uk/forum/topic/19326

[shavecat]

@cyperghost
THank YOU!

[WarC0zes]

hi,
I have a problem of vsync, I have a stuttering of images. How to correct this problem?
I use the openbor version of the post.

[WarC0zes]

I solved my problem by installing the openbor-6xxx version.

[RxBrad]

Googling around for a vectorized OpenBOR SVG for my EmulationStation theme led me here. Unfortunately, for some odd reason, the logo posted near the beginning of this thread actually crashes RetroPie to shell if it actually tries loading the image in EmulationStation.

Today, I spent an hour or two revectorizing this logo by hand, if anyone wants to use it...

Link: https://github.com/rxbrad/es-theme-gbz35/blob/master/openbor/system.svg

[BiZzAr721]

@RxBrad Thank you

[LukeDS83]

I'm still being dumped back to ES everytime I try and run OpenBor (downloaded the latest version from 01/05/2019) - it is saying that a certain file can't be found (some vid library I think?). I've tried to clean up my install as much as possible, I am even considering re-installing the OS again so everything is completely clean and trying again. Such a pain, I really want to try and get Rescue Palooza and Beats of Power running.

[cyperghost]

@LukeDS83 How do you compile OpenBOR?

[LukeDS83]

I am just downloading from SSH with ( wget "http://raw.githubusercontent.com/crcerror/OpenBOR-63xx-RetroPie-openbeta/master/openbor_openbeta.sh"; bash openbor_openbeta.sh galina; rm openbor_openbeta.sh )

Am a NOOB to Pi so I imagine I am doing something wrong. Can get Retropie and EmulationStation running fine.

[cyperghost]

This is a precompiled binary. @LukeDS83 I worked on this for about one year it might be that newer modules (like you metioned) do not work then.