I messed up my settings.

A Former User

Cheers for all the replies. What I don't understand is, if I just delete the runcommand-onstart.sh, and try without one, I still get the same python error. And it does this on anything I try to launch via ES.
I will try the suggestions by stoney66, thanks for those. If not, I'm beginning to think I will have to go back to my image backup of the whole sdcard. Problem with that is, and it's my own fault, I have done a lot of work inbetween backups - so a new backup was pending.
One last thing. What does ES first look for when you launch a retroarch/normal emulator ?
And, nothing is logged in /dev/shm - so I have nothing to look at, or go by.

mitu

@John_RM_70 Try re-installing the runcommand package, that's the command that Emulationstation runs no matter which emulator is used.

A Former User

@mitu Good idea, didn't think of that. I'm just waiting for the Pi to boot. Will try that, next.

Edit: Tried all suggestions. Same error.

python: can't open file /opt/retropie/configs/all/runcommand-onstart.sh : [Error no 2] No such file or directory.

Really stumped.

mitu

That's really weird, python is only used in RetroPie for starting joy2key (from Runcommand) and for Bluetooth controller pairing.
Can you get the Emulationstation log from /home/pi/.emulationstation/es_log, after you start the game and get the error, and post it on pastebin.com ?

A Former User

@mitu said in I messed up my settings.:

es_log

The log file was in /opt/retropie/configs/all/emulationstation

/opt/retropie/configs/all/emulationstation

lvl2: Attempting to launch game...
lvl2: python /opt/retropie/configs/all/runcommand-onstart.sh /home/pi/RetroPie/roms/arcade/hypsptsp.zip arcade dummy
lvl1: ...launch terminated with nonzero exit code 512!
lvl2: Creating surface...
lvl2: Created window successfully.
lvl2: req sound [detailed.launch]
lvl2: (missing)
lvl2: Attempting to launch game...
lvl2: python /opt/retropie/configs/all/runcommand-onstart.sh /home/pi/RetroPie/roms/arcade/88games.zip arcade dummy
lvl1: ...launch terminated with nonzero exit code 512!
lvl2: Creating surface...
lvl2: Created window successfully.
lvl2: Added/Updated 2 entities in '/home/pi/RetroPie/roms/arcade/gamelist.xml'
lvl2: EmulationStation cleanly shutting down.

that is all it says after trying the first entry in "Arcade".

Edit: Wrong log file. Sorry. Uploaded the correct one. I was pasting a log I found online.

mitu

@John_RM_70 I'm sorry to say it, but your problem is not in RetroPie, it's the script you have used to replace runcommand

lvl2: python /opt/retropie/configs/all/RGB-Pi/Emu_Launcher.py /home/pi/RetroPie/roms/arcade/88games.zip arcade dummy

Are you using a RetroPie image or a 3rd party image ?

A Former User

My own image. Built from scratch Retropie v4.4
I have been using custom runcommand-onstart.sh settings from many Pi2scart forums. But as soon as I found settings that went out of sync on my TV, I wiped them all and started again.
Ignore the first paste, I was googling the error and found a similar problem on a different forum. Forgot I had that in the clipboard.

mitu

@John_RM_70 And it's still wrong. The command line

lvl2: python /opt/retropie/configs/all/runcommand-onstart.sh /home/pi/RetroPie/roms/arcade/hypsptsp.zip arcade dummy

makes no sense. The onstart script is not meant to be executable directly, but rather included by RetroPie's Runcommand script.
And Pythong and Bash are different scripting languages, so you can't execute a shell script with python.

Did you modify your es_systems.cfg file and replaced the Runcommand with the script line above ?

cyperghost

@mitu sharp eyes monsieur (or eagle eyes?)

A Former User

@mitu said in I messed up my settings.:

Did you modify your es_systems.cfg file and replaced the Runcommand with the script line above ?

Sharp eyes indeed. I don't believe it but there is no es_systems.cfg, just a master file from the original Retropie install, and no back up. Thankfully, I backed this up to my PC last week. So, I'm going to put the backup file back and see if that does it.
I will get back a bit later, but I think mitu has solved this.

Edit:
Ha, that did it, and everything now shows up properly. I didn't have a es_systems.cfg. Copied over a older backup and everything works great. Even my original custom hdmi_timings, the ones I tried before I messed up, now all work. Great.

mitu:- Many thanks for your help. I owe you a beer.

Clyde

Good thing that you have a backup, because …

no backup, no pity.

A Former User

Yep, no backup then we only have ourselves to blame.
I'm wondering if the problems started when I have had to pull the power plug on the Pi, after exiting a game and getting a black screen - My TV goes out of sync. So, I'm basically not doing a clean shut down, and doing this for many times.
The custom settings I have wanted are from the Pi Scart hat - the RGB-Pi. It's not a traditional hat, it's a scart cable with a GPIO pins connection with the electronics in the cable. My Pi2Scart can't use it's settings, it uses 24-bit colour depth, and a different dtoverlay.
But, it does use the superb 1600px/1900px tweaks, which is what I'm determined to get working. Such as this

"megadrive") # Load Sega Megadrive timings

vcgencmd hdmi_timings 1920 1 48 192 240 240 1 3 3 16 0 0 0 59.92 0 37680000 1

tvservice -e "DMT 87"

fbset -depth 32 && fbset -depth 32 -xres 1920 -yres 240

;;

Those look great, especially scrolling. But I can't get back to ES using runcommand-onend.sh, I just get a black screen. Hence all the illegal shut downs, and wiping it all and starting again.

Anyway, you live and learn, and I've definitely learnt the hard way. Thanks to you all, appreciate it.

mitu

@John_RM_70 said in I messed up my settings.:

The custom settings I have wanted are from the Pi Scart hat - the RGB-Pi. It's not a traditional hat, it's a scart cable with a GPIO pins connection with the electronics in the cable. My Pi2Scart can't use it's settings, it uses 24-bit colour depth, and a different dtoverlay.

You should just enable SSH and connect to the PI, then try various tvservice and vcgencmd settings to plug into the onend script. If the screen is blank, you'd still have control and try out things and even shutdown/restart, without having to pull the plug and abruptly shutdown the system.

A Former User

mitu, this is my onend script.

vcgencmd hdmi_timings 320 1 6 30 44 240 1 3 3 21 0 0 0 60 0 6400000 1
tvservice -e "DMT 87"
fbset -depth 32 && fbset -depth 32 -xres 320 -yres 240

clear

This doesn't work. Not only do I get a blank screen, the Pi isn't responding via SSH. It's like the Pi locks up, but I can't see why.

mitu

@John_RM_70 Try one command at a time and see which ones locks up the Pi. It's probably tvservice, but it could be because of the previous command, which ~~specifies~~ might specify an invalid mode.
Have you tried tvservice -p (preferred mode) ?