xbox one controller bug

mitu

@aatheronb said in xbox one controller bug:

it confuses the pi because is see's the controllers as the same name

What does 'confuses' mean ? It disconnects the other controller or ? What's the problem you're seeing ?

Please add more info about your setup - https://retropie.org.uk/forum/topic/3/read-this-first

aatheronb

the controllers control the same character in some games

aatheronb

like super smash bros

mitu

@mitu said in xbox one controller bug:
Please provide more info, as requested in https://retropie.org.uk/forum/topic/3/read-this-first - including what type of controllers, what emulator you're using, etc.

herb_fargus

@mitu this happened in the past with the xboxdrv driver and also if you had two janky off brand dragonrise controllers, it treated the controllers as the same controller because they had the same name so one controller would control both. I'm not as familiar with Xbox one controllers but I wonder if it's something similar

Btw I have a bit of a vested interest in this post for... Reasons. Would be interested in helping find a solution

aatheronb

Pi Model or other hardware: (B+)
Power Supply used: (5v 1.8A)
RetroPie Version Used 4.4
Built From: (Pre made SD Image on RetroPie website,)
USB Devices connected: none
Controller used: xbox one
error in certain multi player video games one controller controls all players
emulator (all)
I have 4 Xbox one controllers, I've paired them with the Bluetooth in the retropie setup menu, I'm using the lr-mupen64plus core

aatheronb

the controllers are all named (xbox one wireless) on the controller config screen

mitu

@aatheronb said in xbox one controller bug:

the controllers are all named (xbox one wireless) on the controller config screen

That's normal - since they all report the same name. As @herb_fargus said - did you install the xboxdrv by any chance ?
Does this happen in all games, or only in N64 (SSB) ? Did you do any additional configuration on the system, besides the defaults RetroPie provides ?

aatheronb

i tried but i couldnt find any guides where they use xbox one controllers in the xboxdrv its all xbox 360 controllers. this problem happens in all emulators that have multiplayer games.
code i used

sudo nano /opt/retropie/configs/all/autostart.sh

then i used

sudo bash -c 'echo 1 > /sys/module/bluetooth/parameters/disable_ertm'

mitu

OK, so you didn't do any great deal of configuration on your installation. You don't actually need the xboxdrv for your controllers to work.
Now, I'm not sure about what model of Pi you're using - see my previous question. If you're using a B+, which is the equivalent of a Pi1, you don't have an onboard Bluetooth adapter, which means you'd be using a BT USB adapter. The 3B+ model has onboard BT. Which model are you using ? (I'm inclined to say 3B+, but a confirmation would be nice).

Since your problem is quite peculiar, we'd need a log file and some diagnostic info.

Run from a command line (or SSH session).

cat /proc/bus/input/devices

and post the output.

Start a multi-player game, but use the Runcommand launch menu and chose to run your game with Verbose Logging enabled. Exit the game, then get the emulator log file from /dev/shm/runcommand.log and post it to pastebin.com so we can take a look.

aatheronb

N: Name="Logitech USB Receiver"
P: Phys=usb-3f980000.usb-1.2/input0
S: Sysfs=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C534.0001/input/input0
U: Uniq=
H: Handlers=sysrq kbd leds event0
B: PROP=0
B: EV=120013
B: KEY=10000 7 ff800000 7ff febeffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=1f

I: Bus=0003 Vendor=046d Product=c534 Version=0111
N: Name="Logitech USB Receiver"
P: Phys=usb-3f980000.usb-1.2/input1
S: Sysfs=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C534.0002/input/input1
U: Uniq=
H: Handlers=kbd mouse0 event1
B: PROP=0
B: EV=1f
B: KEY=3007f 0 0 0 0 483ffff 17aff32d bf544446 0 0 ffff0001 130f93 8b17c000 677bfa d941dfed 9ed680 4400 0 10000002
B: REL=1c3
B: ABS=1 0
B: MSC=10

aatheronb

do you want all the controllers connected

mitu

@aatheronb Well, yes, the command should have been run with the controllers connected. Right now it only shows the Logitech USB receivers for the keyboard/mouse combo and nothing about the controllers.

aatheronb

I: Bus=0005 Vendor=045e Product=02fd Version=0903
N: Name="Xbox Wireless Controller"
P: Phys=b8:27:eb:9e:58:59
S: Sysfs=/devices/platform/soc/3f201000.serial/tty/ttyAMA0/hci0/hci0:13/0005:045E:02FD.0004/input/input3
U: Uniq=ec:83:50:77:3e:ba
H: Handlers=kbd event3 js1
B: PROP=0
B: EV=1b
B: KEY=7fff0000 0 0 0 1000 40000000 0 0 0 0
B: ABS=30627
B: MSC=10

I: Bus=0005 Vendor=045e Product=02fd Version=0903
N: Name="Xbox Wireless Controller"
P: Phys=b8:27:eb:9e:58:59
S: Sysfs=/devices/platform/soc/3f201000.serial/tty/ttyAMA0/hci0/hci0:11/0005:045E:02FD.0005/input/input4
U: Uniq=9c:aa:1b:9a:1b:bf
H: Handlers=kbd event2 js0
B: PROP=0
B: EV=1b
B: KEY=7fff0000 0 0 0 1000 40000000 0 0 0 0
B: ABS=30627
B: MSC=10

I: Bus=0005 Vendor=045e Product=02fd Version=0903
N: Name="Xbox Wireless Controller"
P: Phys=b8:27:eb:9e:58:59
S: Sysfs=/devices/platform/soc/3f201000.serial/tty/ttyAMA0/hci0/hci0:12/0005:045E:02FD.0007/input/input6
U: Uniq=ec:83:50:a0:1c:4f
H: Handlers=kbd event4 js2
B: PROP=0
B: EV=1b
B: KEY=7fff0000 0 0 0 1000 40000000 0 0 0 0
B: ABS=30627
B: MSC=10

I: Bus=0005 Vendor=045e Product=02fd Version=0903
N: Name="Xbox Wireless Controller"
P: Phys=b8:27:eb:9e:58:59
S: Sysfs=/devices/platform/soc/3f201000.serial/tty/ttyAMA0/hci0/hci0:14/0005:045E:02FD.0009/input/input8
U: Uniq=ec:83:50:a0:1d:18
H: Handlers=kbd event5 js3
B: PROP=0
B: EV=1b
B: KEY=7fff0000 0 0 0 1000 40000000 0 0 0 0
B: ABS=30627
B: MSC=10

aatheronb

and when i put the game on verbose logging the controllers didnt even work its probably just the emulator
i normaly use gles2n64 instead of the Ir emulator

aatheronb

@mitu said in xbox one controller bug:

/dev/shm/runcommand.log

permission denied?

mitu

@aatheronb That's a file you're supposed to copy. Run this

cp /dev/shm/runcommand.log $HOME/RetroPie/roms

Then open the ROM folder (with all the systems) and you'll find the file. Open it with a text editor (Notepad) and upload the contents to pastebin.com, providing the resulting URL afterwards.

mitu

Hm, I think your controllers might be better served by using the xpadneo driver, which is not currently part of RetroPie's installation.

Can you try installing it from https://github.com/atar-axis/xpadneo ? Follow the Installation steps from the project's page. Exit Emulationstation and at the command prompt, type the install commands.

git clone https://github.com/atar-axis/xpadneo.git
cd xpadneo
 ./install.sh

Reboot your system (sudo reboot), then go into the RetroPie setup script and follow the steps to pair a Bluetooth controller - remove any previously configured gamepads first. After you pair again the controllers, configure one of them in Emulationstation (doesn't matter which), then try and start a game to see if all of them work at the same time correctly.

aatheronb

THANK YOU it worked perfectly

mitu

@aatheronb Ha, what do you know, it worked. I guess it's time we add it to RetroPie's list of drivers. Thanks for the feedback.
Give it a few more tries with other systems (besides N64) - maybe a fighting game like Street Fighter - and see how it behaves.