Suggestions for ports

tpo1990

@ellohir Yes that is the case with "lr" meaning an libretro port. You could be lucky enough to see if it is possible to configure a controller in the specific source port. For example Quake 3 does work with a controller, but must be configured in Quake 3 options.

One could take a look into creating a libretro version of the source ports, but that will require some knowledge and coding skills in order to create such a scriptmodule such as lr-prboom :-)

retropi19

tpo1990 do you have instructions for Dune Legacy and Julius ?? to put them manual in retropie?

tpo1990

@retropi19 Not yet. It is in testing phase at the moment and can not check it since i dont have my RPI with me today.

You could go to the Dune Legacy website and search for compiling on linux. Thats what i used. It has some screen flickering when playing the game, but i already have managed to find a solution to that. Some SDL variables must be changed to fix it before compiling the binary.

As for Julius, i downloaded from the github repository and made sure that no other dependencies are missing. I then tried with default cmake and make command in Linux terminal on Raspbian and copied the gamedata from my Caesar III windows installation so that the binary could launch the game.

retropi19

any change for OpenFodder i cannot find instructions to build anywere

tpo1990

@retropi19 No change. I have not tried that source port.

According to the source ports website they have described this:

Unix/Linux
Ports for OpenBSD and RetroPie are available, and the game should compile on most *nix distributions

According to the developers, it should be possible to compile and make a binary on RetroPie, copy the game data files and then launch the game through that same binary.

retropi19

@tpo1990 said in Suggestions for ports:

Ports for OpenBSD and RetroPie are available

yes how to compile it?? were are the instructions??

tpo1990

@retropi19 No clue. I would probably try default cmake and make commands for compiling from source.

My way of doing this, is to look up on which libraries dependencies that the source port is requiring, then download and install them with sudo apt-get install "package"

Once making sure i have installed all libraries dependencies, i would download/clone the source and create a build folder inside it and then try to compile from there.

Default compile commands:

ccmake ..
make

I might go into checking out the source and see if i can compile it, but right now my head is focused on creating scriptmodules for other ports that i have successfully compiled on my RetroPie.

retropi19

how many extra ports have you compiled??

tpo1990

@retropi19 Is it the ones that i have built a scriptmodule and shared for RetroPie community or just for my own Raspberry Pi?

retropi19

all of them both

tpo1990

@retropi19 Well

The ones that i have built a working scriptmodule and shared to the RetroPie community is 5.
Hexen 2 - Hammer of Thyrion source port
Jazz Jackrabbit - OpenJazz source port
Doom Legacy - Doom splitscreen source port
Blake Stone Aliens of Gold - BStone source port.
Zandronum - Doom source port built for test in Doom collection repo.

All the ones that i have tried on my own Raspberry Pi but not shared with RetroPie community:
ECWolf - Wolfenstein 3D source port
Return to Castle Wolfenstein - IORTCW based on ioquake 3
Heroes 2 of Might and Magic - Fheroes2
Dune 2 - Dune Legacy source port
Dave Gnukem - Duke Nukem 1/2 clone
HexenWorld - Online Hexen 2 multiplayer from Hammer of Thyrion source port.
ReMooD - Doom 4 player splitscreen source port
Odamex - Doom source port
Assault Cube - FPS clone like Counterstrike
Julius - Caesar III source port.
OpenClaw - Captain Claw source port.

There could be more, but this is what i can think of right now. It should be noted that the ones that i only have built on my own Raspberry Pi, is a mixed experience in regarding how well the actual source port runs on a Raspberry Pi 3B.

retropi19

@tpo1990 said in Suggestions for ports:

Assault Cube

is assaultcube really playing without any problems?
i tried a lot in the past but could not make it work correct
care to share or just send me a message with instructions?
thanks

tpo1990

@retropi19 It plays, but from what i remember you need to change the video settings to as low as you can in order to get a smooth gameplay.

I think i found a guide on the internet and just followed that. Cant remember from where.

retropi19

there is no guide that working i searched everything,anyway thanks

tpo1990

@retropi19 Hmm maybe it was the server version that i compiled last time. I might look into it again. I think it only runs in X11 window (Desktop)

retropi19

A suggestion tpo1990 why you dont take the zerojay repository you are active into making/porting games or just take his ports and improve them fix them half of them are not working and others need updating

As he mention in his repository:
This repository is no longer maintained. Please feel free to fork it and take it over for the Retropie community as I am no longer using it and no longer have time to do any work with it. To those of you who have made an effort and contributed, you have my endless thanks and respect.

cyperghost

@retropi19 I already asked him the same in this thread here

retropi19

if he can take it i can help i have fixed/updated some of the ports corrected some that are not working etc

Heartless

What about Parsec port for retropie, as an alternative streaming app?

retropi19

@Heartless said in Suggestions for ports:

What about Parsec port for retropie, as an alternative streaming app?

https://github.com/Kozova1/Parsec-Integration-With-RetroPie

you can do it your self is very easy

by the way im trying to run widelands in retropie it does not run without opengl anymore the command --opengl=0 is not working any help?