Fallout 1 to work on msdos

shavecat

@Brigane
Now i will try
thanks !

Efriim

@shavecat
The CD isn't required for playing as long as you copy the MASTER.DAT(323MB) and CRITTER.DAT(149MB) to the fallout directory.
Original US version MASTER.DAT(318MB) and CRITTER.DAT(150MB)

The fallout.cfg needs some paths, in DOS namesake. This will do:

[sound]
music_path1=data\sound\music\
music_path2=data\sound\music\
[system]
critter_dat=.\critter.dat
critter_patches=.\data
master_dat=.\master.dat
master_patches=.\data

There are some settings in there like the cache, cycle_speed_factor and hashing, I haven't tried these for performance.

These are the patches, you should download all of them. 1.1 is required for 1.2; and 1.2 for 1.35
Fallout 1.1 patch (official)
Fallout 1.2 patch (unofficial)
Fallout 1.35 patch (unofficial)

Efriim

You'll also need DOS4GW in the same directory. If it doesn't come with it, there is an alternate DOS32A that can be downloaded and renamed in its place, it offers no performance gain.

The dosbox.conf

[sdl]
output    = surface

[dosbox]
memsize   = 64 # needs at least 32mb memory up to 64mb is good.

[render]
frameskip = 1 # It is good use of 1 frameskip, it will be essential to employ this in order to balance the audio with the high cycle rate.

[cpu]
core      = dynamic
cputype   = 386 # I'm fairly certain to use 386
cycles    = fixed 44350 # This was practically the highest value I could get.
#cycles=max # Max is a good option too. Or reduce the cycles by about 12000
cycleup   = 1650
cycledown = 1650

[mixer]
rate      = 22050 
blocksize = 2048
prebuffer = 270 

[dos]
ems = emm386

The fallout.cfg

#I'm looking for debug variables that might help
[preferences]
combat_speed=50
item_highlight=0
target_highlight=0 #turned the highlight off, it is probably no consequence

[sound]
music_path1=data\sound\music\
music_path2=data\sound\music\
cache_size=448 # Sound cache size, I guess is for DirectX sound only. Non applicable.
[system]
art_cache_size=8 # I reduced this because I ran out of memory.
color_cycling=1 # This effects the target highlighting randomly enough
cycle_speed_factor=1
critter_dat=.\critter.dat
critter_patches=.\data
master_dat=.\master.dat
master_patches=.\data

in case you dont have these drivers for 386 they are needed in the fallout directory.
hmidet.386
hmidrv.386
This is the free 32 bit extender, it can replace \DOS4GW.EXE.
DOS/32A
And here is a Fallout 1.2 DOS executable patched with DOS32A, eliminating the need of DOS4GW. Usable with any patch level 1.1 or 1.35.
FALLOUT.EXE

I'll update with more as I'm going to try to get this working good too.
I ran out of memory so reduced the art cache in fallout.cfg, I think I was running 32mb dos.

shavecat

@Efriim
OMG
thanks a lot !!! <3
so i tried , it just give me the loading screen ... and quit :\

Efriim

@shavecat
Have you set the
memsize = 32 in the roms/pc/fallout.conf

art_cache_size=8, in the roms/pc/FALLOUT1/INTRPLAY/FALLOUT/fallout.cfg?

I think they have to be under their class identifier
[dosbox] and [system]

shavecat

@Efriim
So i added to the system in the fallout.cfg

still loading screen then exit

mitu

@shavecat Remove the exit at the end of the autoexec section so you can see the actual error.
And please, try to use text when posting instead of images - it makes it impossible to copy/paste configurations. If you're using Putty, it's enough to select the lines you want copied and they're automatically copied to the clipboard.

shavecat

@mitu
Thanks , i dont really see the error problem (with the AUTOTEXE) .
but i loaded it direct with the Fallout.exe file.
and will try not images no more.
thanks again.

Efriim

@shavecat
memsize=32 does go in the dosbox.conf, sorry to confuse them. They look similar, I don't type very well.

Efriim

It is really slow too so don't be too disappointed. It is a great game though, you should play it on your computer.

shavecat

@Efriim
U right was 64 , now i change it to 32.
Im still getting like a white screen after loading then quit.

Shame that is so slow if u saying :\

Efriim

@shavecat
64 would work, I can't say what isn't working. Usually if it closes after loading. Is it going back to dos? Are you seeing a fallout splashscreen?

Are you using the Fallout.exe with DOS32A patched, or the regular one from patch 1.2 or 1.1 with DOS4GW? Either would work, but I patched the other one with dos32a myself, so maybe it is just weird.

shavecat

@Efriim
Fallout 1.1 patch (official)
i am seeing the splashscreen loading screen for fallout its even chagne everytime i start it again.
then after loading white screen and exit back to dos (emulator).
/maybe another patch ?

Efriim

@shavecat
Nah that patch will work.
Are you using lr-dosbox?

shavecat

@Efriim
lr-dosbox no.
Trying it with that now.. now its really really slow the loading fallout screen looks stuck...and quit :\

Efriim

@shavecat
Yeah lr-dosbox loads configuration a little differently, like the cycles will be at default 1000, and I don't ever use it to understand it.

Well heres my autoexec from Fallout.conf, it's nothing special, and it obviously isn't finalized.

[autoexec]
# Lines in this section will be run at startup.
# You can put your MOUNT lines here.
@echo off
mount c "/home/pi/RetroPie/roms/pc"
#mount c "/home/pi/RetroPie/memorycard/dos"
#set PATH=%PATH%;C:\bin;C:\setedit\bin;C:\bin\HXRT\BIN
c:
cd Fallout

shavecat

@Efriim

HOLY MOLY !!!!!
ITS WORKING !!!!!!! with the dosbox .
THANKS A LOT !!
looks good and good speed too.
thank you !!
Just load the FALLOUT.EXE .

mitu

@shavecat said in Fallout 1 to work on msdos:

Just load the FALLOUT.EXE .

What did you try before - and it was not working ?

Efriim

@mitu
lol

shavecat

@mitu
@Efriim :
memsize=32 (did at my 64) does go in the dosbox.conf, sorry to confuse them. They look similar, I don't type very well.
i think that one help .
but im not sure lol :)