The new Raspberry Pi 4 is here!!
-
@Darksavior said in The new Raspberry Pi 4 is here!!:
Flycast has major graphic bugs that makes most games completely unplayable. Like, Fist of the North star (atomiswave) ran at around 50-55fps but I can't distinguish anything due to the graphic bugs.
Looks like the widescreen hack produces some artifacts, the game seems to run close to 60 fps otherwise
-
-
@Darksavior There's no RetroPie build atm, but tests and developments are taking place. It's just a Raspbian Buster system running RA and the
lr-flycastcore, under the same build conditions as on Lakka (i.e. using the KMS driver, no X.org). I thinklr-flycastadded some quirks for the PI4 drivers at some point, maybe an more recent version would work better.
The menus/qte are running at 20-30 fps and exhibit some glitches, but during gameplay it's 59.x FPS, without any frameskip active. -
I'm most interested in the performance increase using shaders. I only care about systems until the 32 bit era, which all run fine enough on Pi3, but most shaders are completely unuseable on the pi3 due to the graphics chip being ancient. Would really love if the CRT-lottes shaders would run at 60fps @ 720p. :)
CRT-Royale would be even better, but that's one bridge too far i think.
-
@Darksavior Lakka corrupted itself for me too. Before it corrupted I ran some TurboGrafx-16 games, and the speed was fine but the screen was tearing quite a bit.
-
@mitu Silly me. I was using the wrong lakka pi4 build. Now it looks fine. The crt-pi shader does seem to slow it down quite a bit. I assume that's due to the driver being unoptimized. I also see tearing. Changing to the glcore driver ~ doubles the menu fps close to 60. At least this is something I can play around with.
I am noticing the same problems I encountered on the ps classic. The usable crt shaders don't scale very good. The crt-pi shader looks fine on my 1440p monitor but not so great on my 1080p monitor. The ps classic is 720p so it looks worse. These are "slang" shaders that only work with the glcore driver.
-
if there's a better model than pi 3, it's pi 4. If it can run N64 almost perfectly, then it just might support Gamecube (in a future model).
-
@TheRetroGamer From trying a few early/nightly lakka builds and whatnot, n64 runs like poo :)
I'll have a definite answer when the retropie team releases their build. -
@Darksavior Not sure why you are having issues with N64. I watched a video where someone used an unofficial port of Retro pi and played through some games. The N64 was much improved even on this unoptimised build with unoptimised emulators. Saturn was about 8 FPS though. Dreamcast was much better too. Once things are worked on I imagine that N64, Dreamcast and to some extent Saturn should be playable. I doubt Gamecube will as that is still glitchy on my i7 SFF build with a 1050ti.
Here is the video for those interested. The guy doesn't seem to know about FPS because he thinks that saturn emu is about 30FPS. If it was it would be playable but at least you get to see that there is improvements from the faster hardware.
-
The lakka nightlies are better than whatever custom build that person's using.
-
Really cool to hear the nightlies are working great!!
I don't have a Pi4 yet, but I want to get one, however... it would be wise to wait for a revision I think. (The USB C port stuff) -
@jrb555 said in The new Raspberry Pi 4 is here!!:
I don't have a Pi4 yet, but I want to get one, however... it would be wise to wait for a revision I think. (The USB C port stuff)
The USB C port issue is barely an issue at all. It only affects "e-marked" cables which most people probably wont be using. The official RPI adapter works just fine for me and only cost $8.
-
@quicksilver Yea I really appreciate the official psu being widely available at online shops here in the US and with an $8 price tag. Not many shops have the pi3 psu and it's more expensive.
-
I hope someone collects the ~$900 bounty to add a dynarec recomp to mednafen psx beetle. It's the better emulator and has better compatibility. A pi4 oc'd to 2Ghz can run some 2d games near fullspeed but 3d games like mgs are at like 50fps. It ran a protected japanese game, cardcaptor sakura tetris, without the cheat patch. Haven't done much testing with more, though.
This is on the nightly lakka build. I don't code so not sure just how unoptimized it is.
-
@quicksilver Im very picky about how the power adapter looks and what the length is and all that.
I will more than likely be using non-official stuff just like I did tons of times with the Pi 3.@Darksavior Do you think a dynarec recomp would make it work nicely without overclocking?
-
@jrb555 I’m not a dev so it’s just a guess. I’d say yes, just because 3D games are around 10fps away from being full speed.
-
Got my PI4 built and ready to go.. waiting on the RetroPI build to support it!
-
Hey, does anyone here use that 240p mod for the Composite output through 3.5mm?
These worked well on the 3B and 3B+, but I remember the + model required an update for it to work, and Im wondering if it works on the Pi4 or if we're gonna require an update for it? -
Hi all. I am late to the Pi party, but just received my first ever Raspberry Pi, a 4Gb V4.
I'm super excited to get started on making a RetroPie arcade machine, using my old X-Arcade Tankstick.
Without any suggestion of putting any pressure on the RetroPie devs - whose volunteer work I really appreciate - can anyone give me a sense of how long it might be til a RetroPie for the Pi 4 becomes available?
Thanks in advance - and lots for me to learn to learn in meantime :)
-
@Appogee sorry mate, there is no WIP-Status or anything similar to get an idea when the next Retropie will be released.
You are one in a million waiting for it ;)
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.