Dreamcast mvc2 crashing at stage 2

mitu

@rejesterd said in Dreamcast mvc2 crashing at stage 2:

It seems the latest retropie_setup script grabs reicast commit id 201bf1543616356cb9fa316cfcde7b89dfc09428, which doesn't contain the fix that reicast maintainers identified as being the root cause for the crash in MVC2

which fix is that ? The RetroPie-Setup script uses the master branch from the reicast repository, not the development one (not recommended by the maintainer).

rejesterd

@mitu The fix is reicast issue 1684. Have you updated reicast from source in retropie today? If so, what version is shown in your build log?

rejesterd

@mitu - Looks like master only goes up to 1662. Thanks for clarifying.

mitu

@rejesterd the master branch hasn't been updated in a long time (July last year to be exact), so my guess is that updating from source/binary will get anyone that version. For now, the fix you mention is only part of the alpha branch, which is the development branch of reicast and is in constant flux.

rejesterd

@tackett1980 No need to run the commands I posted previously, as mitu clarified something for me.

So the main issue is that the version of reicast which retropie currently provides does not contain the fix reported in reicast issue #1684. This fix will prevent the crashing at stage 2 in mvc2. So if you want this fix, you need to manually build a newer version of reicast on your pi.

My initial testing of mvc2 has been good so far in my newer build of reicast, but as mitu indicated, this was built from a development branch. So it hasn't gone through as much testing (if any) as the older version which retropie will install for you. So expect other issues to come up.

For example, I already noticed that the game freezes if I hit the Exit hotkey button on my controller. Fortunately, I can workaround this by configuring a Menu hotkey button, and hitting that instead. That brings up the reicast menu, where you can then select 'Exit'. So that's just a preview of what you'll be dealing with. Fortunately, this issue has an easy workaround (i.e. use the Menu hotkey when playing a game, and then select 'Exit' from the menu). Other issues may not

If you want to try building a newer version of reicast manually on your pi, I can give you steps. Just understand that you might want to continue using the retropie-provided version of reicast for other dreamcast games (which my steps would enable you to do). If you're interested, post the contents of..

/opt/retropie/emulators/reicast/reicast.sh
/opt/retropie/configs/dreamcast/emulators.cfg

..and I'll write up some steps for you.

tackett1980

@rejesterd

Wow.

Thank you guys so much for this information and everything!

I haven’t had the chance to look today, I’m feeling a little under the weather.

The only game I want to play is mvc2, I have no interest in any other Dreamcast game at this point. So if you could give me steps to build this the way you are describing I would appreciate it and I will give it a try.

I wonder if the Naomi emulation using the reicast core for the arcade rom has the same issues? I’ve seen some people on YouTube running the Naomi emulator arcade version of this game and my ultimate goal is to get that up and running in a dedicated cabinet...at some point. For now I’d just like to be able to play this version

So if you could list the steps that need to be done to get this operational I would appreciate it very much. I will post the requested information from my end if I don’t feel like a walking corpse tommorrow.

Edit: does anyone have any idea when they will add the fix to the master branch?

Thanks again!

rejesterd

Ok, feel better. Here you go..

First, open a terminal window on the pi, and run the following:

cd ~/

git clone -n https://github.com/reicast/reicast-emulator.git
 
cd ~/reicast-emulator/

git checkout 49046aecd9e87d6ba8c1508ad6222526842bbacd

cd reicast/linux/

make -j4

That will start the build, and it will take a few minutes to complete. When it's done, you'll have the command prompt available to you again in the terminal window. If the build was successful, you should see a file called 'reicast.elf' when you run..

ls -al

..from that same terminal window. That's your new reicast binary, which needs to be placed in the reicast installation directory. To do that, run the following:

sudo cp reicast.elf /opt/retropie/emulators/reicast/bin/reicast_49046ae

At this point, you'll have 2 copies of the reicast binary in /opt/retropie/emulators/reicast/bin/: the new one you just copied over, and the one that retropie_setup.sh installed for you (which is just named 'reicast').

If you can get to that point, then run..

cat /opt/retropie/emulators/reicast/bin/reicast.sh

cat /opt/retropie/configs/dreamcast/emulators.cfg

..and copy/paste the resulting output from each cat command. Then I can send you the remaining steps.

Edited: Just needed to correct the path to reicast.sh shown above

tackett1980

@rejesterd

I will do this when I get home and post it. Thanks!

tackett1980

@rejesterd

Ok sir I made it up to the very end where you are asking me to run these two lines.

It says not such file or directory, however.

My reicast.sh is not in the reicast root directory, it is in reicast/bin/reicast.sh

Ok I ran the cat on it from the bin directory, but the output is enormous and I’m not sure how to get it from the pi to here on the forums unless I take a picture of it or something.

edit:
Ok I think I'm following what your doing here. I had to google what the cat command did but here it is.

reicast.sh:

#!/usr/bin/env bash

# This file is part of The RetroPie Project
#
# The RetroPie Project is the legal property of its developers, whose names are
# too numerous to list here. Please refer to the COPYRIGHT.md file distributed with this source.
#
# See the LICENSE.md file at the top-level directory of this distribution and
# at https://raw.githubusercontent.com/RetroPie/RetroPie-Setup/master/LICENSE.md
#

AUDIO="$1"
ROM="$2"
XRES="$3"
YRES="$4"
rootdir="/opt/retropie"
configdir="$rootdir/configs"
biosdir="$HOME/RetroPie/BIOS/dc"

source "$rootdir/lib/inifuncs.sh"

function mapInput() {
    local js_device
    local js_device_num
    local ev_device
    local ev_devices
    local ev_device_num
    local device_counter
    local conf="$configdir/dreamcast/emu.cfg"
    local params=""

    # get a list of all present js device numbers and device names
    # and device count
    for js_device in /dev/input/js*; do
        js_device_num=${js_device/\/dev\/input\/js/}
        for ev_device in /dev/input/event*; do
            ev_device_num=${ev_device/\/dev\/input\/event/}
            if [[ -d "/sys/class/input/event${ev_device_num}/device/js${js_device_num}" ]]; then
                file[$ev_device_num]=$(grep --exclude=*.bak -rl -m 1 "$configdir/dreamcast/mappings/" -e "= $(</sys/class/input/event${ev_device_num}/device/name)" | tail -n 1)
                if [[ -f "${file[$ev_device_num]}" ]]; then
                    #file[$ev_device_num]="${file[$ev_device_num]##*/}"
                    ev_devices[$ev_device_num]=$(</sys/class/input/event${ev_device_num}/device/name)
                    device_counter=$(($device_counter+1))
                fi
            fi
        done
    done

    # emu.cfg: store up to four event devices and mapping files
    if [[ "$device_counter" -gt "0" ]]; then
        # reicast supports max 4 event devices
        if [[ "$device_counter" -gt "4" ]]; then
            device_counter="4"
        fi
        local counter=0
        for ev_device_num in "${!ev_devices[@]}"; do
            if [[ "$counter" -lt "$device_counter" ]]; then
                counter=$(($counter+1))
                params+="-config input:evdev_device_id_$counter=$ev_device_num "
                params+="-config input:evdev_mapping_$counter=${file[$ev_device_num]} "
            fi
        done
        while [[ "$counter" -lt "4" ]]; do
            counter=$(($counter+1))
            params+="-config input:evdev_device_id_$counter=-1 "
            params+="-config input:evdev_mapping_$counter=-1 "
        done
    else
        # fallback to keyboard setup
        params+="-config input:evdev_device_id_1=0 "
        device_counter=1
    fi
    params+="-config input:joystick_device_id=-1 "
    params+="-config players:nb=$device_counter "
    echo "$params"
}

if [[ ! -f "$biosdir/dc_boot.bin" ]]; then
    dialog --no-cancel --pause "You need to copy the Dreamcast BIOS files (dc_boot.bin and dc_flash.bin) to the folder $biosdir to boot the Dreamcast emulator." 22 76 15
    exit 1
fi

params=(-config config:homedir=$HOME -config x11:fullscreen=1)
[[ -n "$XRES" ]] && params+=(-config x11:width=$XRES -config x11:height=$YRES)
getAutoConf reicast_input && params+=($(mapInput))
[[ -n "$AUDIO" ]] && params+=(-config audio:backend=$AUDIO -config audio:disable=0)
[[ -n "$ROM" ]] && params+=(-config config:image="$ROM")
if [[ "$AUDIO" == "oss" ]]; then
    aoss "$rootdir/emulators/reicast/bin/reicast" "${params[@]}"
else
    "$rootdir/emulators/reicast/bin/reicast" "${params[@]}"
fi

emulators.cfg:

reicast-audio-omx = "/opt/retropie/emulators/reicast/bin/reicast.sh omx %ROM%"
reicast-audio-oss = "/opt/retropie/emulators/reicast/bin/reicast.sh oss %ROM%"
default = "reicast-audio-omx"

rejesterd

@tackett1980 Sorry about that.. yes, the reicast.sh in the reicast bin folder is what we want. To complete your journey toward the dark side, do the following:

cd ~/

sed 's/\/bin\/reicast\"/\/bin\/reicast_49046ae\"/g' /opt/retropie/emulators/reicast/bin/reicast.sh > ~/reicast_49046ae.sh

chmod +x reicast_49046ae.sh

sudo cp reicast_49046ae.sh /opt/retropie/emulators/reicast/bin/

sudo cp /opt/retropie/configs/dreamcast/emulators.cfg ~/emulators.cfg.old

sed '/reicast/ i reicast-for-mvc2 = "/opt/retropie/emulators/reicast/bin/reicast.sh omx %ROM%"' emulators.cfg.old > emulators.cfg

sudo cp emulators.cfg /opt/retropie/configs/dreamcast/

That's it. So now launch mvc2, and press a button on your controller as it's launching. This will take you to the menu where you can select a specific emulator for this ROM. Select 'reicast-for-mvc2'.

Also, note that if you install/update any dreamcast emulators via retropie_setup going forward, these custom settings will be overwritten. So maybe keep some copies of reicast_49046ae.sh and emulators.cfg in your home directory.

tackett1980

@rejesterd

Alright friend. I thank you for all this hard work with me.

I did this, and it does come up in the select emulators, but it won’t boot. Just crashes back to the emulation station rom select screen.

I probably screwed something up somewhere

rejesterd

hm.

cat /dev/shm/runcommand.log

Take a look at the log. Then launch the game with your default reicast emulator (reicast-audio-omx, and we can compare the logs.

tackett1980

@rejesterd

OK,

here is the runcommand with the default reicast.

Parameters: 
Executing: /opt/retropie/emulators/reicast/bin/reicast.sh oss "/home/pi/RetroPie/roms/dreamcast/Marvel vs. Capcom 2 (USA).gdi"
glGetError 0x500
Config dir is: /home/pi/.reicast/
Data dir is:   /home/pi/.reicast/
Personality: 00C00000
Updated personality: 00800000
found libbcm_host
rpi2: bcm_init
ARM VFP-Run Fast (NFP) enabled !
Linux paging: 4096 00001000 00000FFF
Info: nvmem is enabled, with addr space of size 512MB
Info: p_sh4rcb: 0x4f9f0000 virt_ram_base: 0x53af0000
Virtual cfg config:homedir=/home/pi
Virtual cfg x11:fullscreen=1
Virtual cfg input:evdev_device_id_1=0
Virtual cfg input:evdev_mapping_1=/opt/retropie/configs/dreamcast/mappings/controller_DragonRiseInc.GenericUSBJoystick.cfg
Virtual cfg input:evdev_device_id_2=1
Virtual cfg input:evdev_mapping_2=/opt/retropie/configs/dreamcast/mappings/controller_DragonRiseInc.GenericUSBJoystick.cfg
Virtual cfg input:evdev_device_id_3=-1
Virtual cfg input:evdev_mapping_3=-1
Virtual cfg input:evdev_device_id_4=-1
Virtual cfg input:evdev_mapping_4=-1
Virtual cfg input:joystick_device_id=-1
Virtual cfg players:nb=2
Virtual cfg audio:backend=oss
Virtual cfg audio:disable=0
Virtual cfg config:image=/home/pi/RetroPie/roms/dreamcast/Marvel vs. Capcom 2 (USA).gdi

evdev: Opened device 'DragonRise Inc.   Generic   USB  Joystick  ' using custom mapping 'DragonRise Inc.   Generic   USB  Joystick   mapping'
evdev: Opened device 'DragonRise Inc.   Generic   USB  Joystick  ' using custom mapping 'DragonRise Inc.   Generic   USB  Joystick   mapping'
EGL config: 0x1, 0x1, 0x1 640x480
OpenGL version: OpenGL ES 2.0
Packed depth/stencil not supported: no modifier volumes when rendering to a texture
Screen DPI is 96, size 640 x 480. Scaling by 1.00
Loaded /home/pi/.reicast/data/dc_boot.bin as bootrom

Loaded /home/pi/.reicast/data/dc_flash.bin as nvram

chd: chd_open failed for file /home/pi/RetroPie/roms/dreamcast/Marvel vs. Capcom 2 (USA).gdi: 5

GDI : 3 tracks
file[1] "Marvel vs. Capcom 2 (USA) (Track 1).bin": FAD:0, CTRL:4, SSIZE:2352, OFFSET:0
file[2] "Marvel vs. Capcom 2 (USA) (Track 2).bin": FAD:300, CTRL:0, SSIZE:2352, OFFSET:0
file[3] "Marvel vs. Capcom 2 (USA) (Track 3).bin": FAD:45000, CTRL:4, SSIZE:2352, OFFSET:0
gdrom: Opened image "/home/pi/RetroPie/roms/dreamcast/Marvel vs. Capcom 2 (USA).gdi"

	 ARM7_TCB addr: 0x4b000 | from: 0x4ad3c | addr here: 0x4a620
Game ID is [T1212N]
recSh4 Init
@@	ngen_ResetBlocks()
Initializing the ARM32 dynarec
readm helpers: up to 00271250
@@	ngen_ResetBlocks()
Using Recompiler
Sh4 Reset
Initializing audio backend "oss" (Open Sound System)...
sound enabled, dsp opened for write
set Frequency to 44100, return 0 (rate=44100)
set dsp to stereo (2 => 0)
set dsp to 16bits signed audio (16/16 => 0)
Using Recompiler
cntx // fpcb offset: -68157440 // pc offset: -184 // pc A0000000
@@	ngen_ResetBlocks()
recSh4:Dynarec Cache clear at 8C0000DE
Invalid GD-DMA start, SB_GDEN=0.Ingoring it.
MODEM Reset
VREG = 00 ARMRST 00
VREG = 00 ARMRST 01
VREG = 00 ARMRST 00
Invalid GD-DMA start, SB_GDEN=0.Ingoring it.
VREG = 00 ARMRST 00
VREG = 00 ARMRST 01
VREG = 00 ARMRST 01
VREG = 00 ARMRST 00
Status: reicast git/n - 11.71 - 85.37 - V: 51.18 (3.32, VGA480p59.94) R: 4.47+10.93 VTX: 0.00 , MIPS: 0.00
Status: reicast git/n - 4.99 - 200.03 - V: 119.90 (1.00, VGA480p59.94) R: 59.95+59.95 VTX: 0.00 , MIPS: 0.00
Status: reicast git/n - 4.63 - 215.79 - V: 129.35 (1.09, VGA480p59.94) R: 59.93+58.43 VTX: 0.00 , MIPS: 0.00
@@	ngen_ResetBlocks()
recSh4:Dynarec Cache clear at AC0082FE
VREG = 00 ARMRST 00
@@	ngen_ResetBlocks()
recSh4:Dynarec Cache clear at AC00FFFE
VREG = 00 ARMRST 01
VREG = 00 ARMRST 01
VREG = 00 ARMRST 00
Status: reicast git/n - 4.58 - 218.14 - V: 130.76 (6.71, VGA480p59.94) R: 14.47+4.99 VTX: 0.00 , MIPS: 0.00
Status: reicast git/n - 8.19 - 122.01 - V: 73.14 (1.54, VGA480p59.94) R: 44.28+2.98 VTX: 0.00 , MIPS: 0.00
Status: reicast git/n - 8.50 - 117.54 - V: 70.46 (1.52, VGA480p59.94) R: 46.14+0.00 VTX: 0.00 , MIPS: 0.00
Status: reicast git/n - 10.32 - 96.86 - V: 58.06 (1.00, VGA480p59.94) R: 58.06+0.00 VTX: 0.00 , MIPS: 0.00
Status: reicast git/n - 10.24 - 97.59 - V: 58.50 (1.00, VGA480p59.94) R: 58.00+0.49 VTX: 0.00 , MIPS: 0.00
Status: reicast git/n - 10.06 - 99.31 - V: 59.53 (1.00, VGA480p59.94) R: 59.03/opt/retropie/emulators/reicast/bin/reicast.sh: line 92:  1832 Trace/breakpoint trap   aoss "$rootdir/emulators/reicast/bin/reicast" "${params[@]}"

Here is the crashy one we just built:

Parameters: 
Executing:

actually its blank, geez I screwed something up.

rejesterd

@tackett1980 - Probably worth taking a look at the modified files..

cat /opt/retropie/emulators/reicast/bin/reicast_49046ae.sh

cat /opt/retropie/configs/dreamcast/emulators.cfg

..just to make sure they look right. Also..

ls -al /opt/retropie/emulators/reicast/bin/

..would confirm that the new binary is there, and it's not 0 bytes in size.

tackett1980

@rejesterd said in Dreamcast mvc2 crashing at stage 2:

@tackett1980 - Probably worth taking a look at the modified files..
cat /opt/retropie/emulators/reicast/bin/reicast_49046ae.sh

cat /opt/retropie/configs/dreamcast/emulators.cfg
..just to make sure they look right. Also..
ls -al /opt/retropie/emulators/reicast/bin/
..would confirm that the new binary is there, and it's not 0 bytes in size.

Ok this is the issue, the reicast_49046ae.sh is 0 bytes.

LOL what did i do wrong?

rejesterd

Maybe the reicast.elf wasn't built..

ls -al ~/reicast-emulator/reicast/linux/

If you don't see it there (or it's also 0 bytes in size), then try the build again (i.e. the steps up to, and including, 'make -j4'). When it finishes, scroll up in the terminal window and look for ERROR or WARN messages.

tackett1980

@rejesterd said in Dreamcast mvc2 crashing at stage 2:

Maybe the reicast.elf wasn't built..
ls -al ~/reicast-emulator/reicast/linux/
If you don't see it there (or it's also 0 bytes in size), then try the build again (i.e. the steps up to, and including, 'make -j4'). When it finishes, scroll up in the terminal window and look for ERROR or WARN messages.

ok I will run it again. The elf file is indeed there and it is about 50mb.

rejesterd

@tackett1980 said in Dreamcast mvc2 crashing at stage 2:

ok I will run it again. The elf file is indeed there and it is about 50mb.

Yeah, 50MB is in the ballpark.. as long as it's not zero. Mine is about 60MB, for reference.

When the new build finishes, try these steps to copy it to the reicast bin folder instead:

cd ~/reicast-emulator/reicast/linux/

cp reicast.elf reicast_49046ae

chmod +x reicast_49046ae

sudo mv reicast_49046ae /opt/retropie/emulators/reicast/bin/

ls -al /opt/retropie/emulators/reicast/bin/

After you run that last 'ls -al' command, the output should look like this:

$ ls -al /opt/retropie/emulators/reicast/bin/
total 120972
drwxr-xr-x 2 root root     4096 Feb 26 09:43 .
drwxr-xr-x 4 root root     4096 Feb 25 14:34 ..
-rwxr-xr-x 1 root root 61917760 Feb 25 15:37 reicast
-rwxr-xr-x 1 root root 61918028 Feb 25 16:59 reicast_49046ae
-rwxr-xr-x 1 root root     1263 Feb 26 09:43 reicast_49046ae.sh
-rwxr-xr-x 1 root root    10956 Feb 25 14:34 reicast-joyconfig
-rwxr-xr-x 1 root root     1247 Feb 25 14:34 reicast.sh

The 'reicast' and 'reicast_49046ae' files should have the same permissions (-rwxr-xr-x), and be approximately the same size.

I'll check up on this tomorrow. Welcome to the wild west.

tackett1980

@rejesterd

Thanks for all your help, I am also going to hit the sack for the night.

I have two questions:

1: would this be easier to accomplish some of this in winscp when possible rather than doing it all with terminal commands?

2: would it also be easier to just uninstall the reicast entirely and build this one as the soul emulator? If I cant get the game working I will likely just delete the entire thing anyway so it doesn't really matter. I have no other dreamcast games Im interested in.

Again, I cant thank you enough for your help. You deserve like a fruit basket or something. If this forum had a rep feature or something Id be repping you into oblivion at this point.

rejesterd

No prob. Thanks for reporting it, because I've leared a lot. This game has issues in all 3 dc emulators. I still need to write up a report for the flycast folks to review.

Oh yeah, if you have winscp, you can just copy the emulators.cfg and reicast_49046ae.sh to your windows machine, edit the files there in Notepad++ (or whatever text editor you use), and then scp them back to the pi. I'm listing the terminal commands for my own benefit, as I'll likely refer back to these steps at some point.
I doubt your existing reicast installation is causing the issue you're having now. It just seems like you have different permissions than me, which didn't allow you to copy the reicast.elf to a new name (or to a location that's owned by the root user). So maybe just try the new steps I mentioned in my previous post.