Suggestions for ports

ExarKunIv

@ecto once i saw your post i decided that its time i mess with compiling. im on a Pi3 not a 4 but i thought that for the most part compiling should be the same

i could not get DevilutionX to work due to my make being a older version. im still on 4.5.1 just cuz with everthing i have done. i dont want to redo it again if its working. i did try updating it to the latest version, but i dont think i installed it right.

but i was able to get NBlood to compile.
with your help and the help of the page you link.
can you start it with a .sh
or do you have to exit EmulationStation everytime you want to start it?

ecto

@ExarKunIv I'm happy that I could help. I had no idea what I was doing at first. But after a while you get the hang of it (at least a little).
It would be best, if you make a .sh file to run the game. That way you don't have to exit emulationstation.
Even better would be if you use runcommand to start the game. With that you can easily reduce the resolution (which I would recommend for sw). Just have a look at an official port and its start script and just go from there.

ExarKunIv

@ecto
So i got blood to work, have not made a .sh file yet but i can use command and it launches

so meanwhile i wanted to give DevilutionX a try. it get about 79% and it then this comes up, any thoughts. i looked at the issues on the github and did not see anything close to this.

im new to this so im lost.
any thoughts

/home/pi/devilutionX/SourceX/dvlnet/packet.cpp: In constructor ‘dvl::net::packet_factory::packet_factory(std::__cxx11::string)’:
/home/pi/devilutionX/SourceX/dvlnet/packet.cpp:217:45: error: ‘crypto_pwhash_argon2id_PASSWD_MAX’ was not declared in this scope
  pw.resize(std::min<std::size_t>(pw.size(), crypto_pwhash_argon2id_PASSWD_MAX));
                                             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/pi/devilutionX/SourceX/dvlnet/packet.cpp:218:45: error: ‘crypto_pwhash_argon2id_PASSWD_MIN’ was not declared in this scope
  pw.resize(std::max<std::size_t>(pw.size(), crypto_pwhash_argon2id_PASSWD_MIN), 0);
                                             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/pi/devilutionX/SourceX/dvlnet/packet.cpp:220:14: error: ‘crypto_pwhash_argon2id_SALTBYTES’ was not declared in this scope
  salt.resize(crypto_pwhash_argon2id_SALTBYTES, 0);
              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/pi/devilutionX/SourceX/dvlnet/packet.cpp:224:4: error: ‘crypto_pwhash_argon2id_OPSLIMIT_INTERACTIVE’ was not declared in this scope
    crypto_pwhash_argon2id_OPSLIMIT_INTERACTIVE,
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/pi/devilutionX/SourceX/dvlnet/packet.cpp:225:4: error: ‘crypto_pwhash_argon2id_MEMLIMIT_INTERACTIVE’ was not declared in this scope
    crypto_pwhash_argon2id_MEMLIMIT_INTERACTIVE,
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/pi/devilutionX/SourceX/dvlnet/packet.cpp:226:4: error: ‘crypto_pwhash_ALG_ARGON2ID13’ was not declared in this scope
    crypto_pwhash_ALG_ARGON2ID13))
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
CMakeFiles/devilutionx.dir/build.make:342: recipe for target 'CMakeFiles/devilutionx.dir/SourceX/dvlnet/packet.cpp.o' failed
make[2]: *** [CMakeFiles/devilutionx.dir/SourceX/dvlnet/packet.cpp.o] Error 1
CMakeFiles/Makefile2:190: recipe for target 'CMakeFiles/devilutionx.dir/all' failed
make[1]: *** [CMakeFiles/devilutionx.dir/all] Error 2
Makefile:171: recipe for target 'all' failed
make: *** [all] Error 2

ExarKunIv

Well im able to get blood to start with a .sh
i just cant seem to get it to go to the dir that has the game files in it.

ecto

@ExarKunIv
Ok, I can halp you to some extend:
The easier is the staring of blood with a search directory for the content. Just use something like nblood -j=/home/pi/RetroPie/roms/ports/nblood and it should work. You have to replace the path to match your nblood content directory, of course.

A little more difficult will be the compilation of devilutionX. I had a problem that cmake hadn't had the required revision number and I had to install some backported cmake from https://packages.debian.org/stretch-backports/cmake. I guess there must be something else with your problem (I also vagely remember having a similar issue with some security packages. But I'm very sorry, I can't help you there anymore as I don't have my Pi3 anymore.

ExarKunIv

@ecto
Thanks for the input on blood. ill give that a try

and for devilutionX no big deal. i was able to get the newest cmake installed and that for me is a win. since i never tried anything with compiling to start with.

now that i have a very small idea on what im doing there are a few other games that do work but need a few tweeks to make them better so maybe i will give them a shot instead and ill go back to devilutionX once i get a Pi4

ecto

@ExarKunIv
Yeah! That's the spirit. I'm doing it the same way. Sadly this way I never manage to acually play the games. Anyways: you could also try Exult if you're into classical RPGs! It works really well on the Pi4 (after trinkering with some options) and it also worked on the Pi3, if you use some little hack that is posted in the Isuues section of Exult's Gitpage!

Have fun!

ExarKunIv

@ecto thanks i will give that a shot also

and yeah i never manage to get to play anything on my Pi. too busy getting it all working just right. lol
least doing that is fun too

ExarKunIv

@ecto well i just ended up putting the files in .config and the folders for Blood, and Exhumed
and i got the .sh to work, so thanks again

retropieuser555

Hey so this is a wide stab in the dark and a question for people who have a far better understanding of linux and it's processes, but I notice Stardew Valley has a native linux port? https://lutris.net/games/stardew-valley/

I'm guessing it would need a much bigger processor than either the pi4 or pi3 has available?

mitu

@retropieuser555 said in Suggestions for ports:

I'm guessing it would need a much bigger processor than either the pi4 or pi3 has available?

That's the PC version (x86) of the game, not an ARM native version. It might be possible to run it via Box86 (which emulates an x86 CPU).

retropieuser555

@mitu That's a bummer, out of interest, how can you tell when it's an x64 rather than an ARM game? Like on gog.com this is the spec:-

System:
Ubuntu 14.04, 16.04 or newer
Processor:
2 Ghz
Memory:
2 GB RAM
Graphics:
256 mb video memory, OpenGL 2
Storage:
500 MB available space

Now obviously RAM and processor is going to be too slow on a pi probably anyway. But am I right in thinking anything that requires Ubuntu is x86 rather than arm?

shavecat

Still will love to have Postal 1 & Captain Claw ;))

mitu

@retropieuser555 You can safely assume that any game listed on GOG is x86 only.

If the game's engine is open sourced (like Doom3, Quake series, some Tycoon games, VVVVVV,etc.), then it's possible to re-use the game's assets (which are not open sourced) under a native (ARM) source port. If it's a DOS game, then it will run under Dosbox, but if it's Windows only and there's no native ARM port, it's always be an x86-only affair.

retropieuser555

@mitu I see what you mean, thanks!

mechafatnick

Hello folks,

Sorry if this is old news, but did you know you could build Alien Vs Predator Classic (the Rebellion game from 98) on a pi?

The source is here: http://icculus.org/avp/

ExarKunIv

@shavecat Captain Claw can be done, you just have to do it your self, but there site

https://github.com/pjasicek/OpenClaw
if you feel comfortable with doing it

ExarKunIv

@mechafatnick thanks for that, im so going to give that a try

ExarKunIv

So gents

since i was able to be blood running i wanted to try my hand on a few others. so i decided on Dune legacy. since it we talked about it ealery on this post.

i was able to get it co compile just fine. and if i exit ES and run ./dunelegacy from the dunelegacy dir. the game launches and works just fine.

but i cant for the life of me get a .sh file to get it to launch.
looking at the runcommand.log show that it is starting fine and no errors from there.

my dunelegacy.sh

#!/bin/bash
"/opt/retropie/supplementary/runcommand/runcommand.sh" 0 _PORT_ "dunelegacy" ""

my emulators.cfg in /opt/retropie/configs/ports/dunelegacy

dunelegacy = "/home/pi/dunelegacy/dunelegacy"
default = "dunelegacy"

want am i doing wrong. im so confused since i was able to get Blood to start from ES with out a problem

quicksilver

@ExarKunIv

dunelegacy = "/home/pi/dunelegacy/dunelegacy"

this doesnt seem right, where is the dunelegacy file extension? is it an .so? an .sh?