Suggestions for ports

quicksilver

Have you looked at the libretro version of dhewm?

Unfortunately I found out it's for 64 bit systems only so it wouldn't compile on my pi 4. Dhewm3 pushes my pi 4 to the max (and I'm overclocked), only way to make it playable is at 640x480 and almost all of the quality settings set to lowest. So I'd imagine that dhewm3+retroarch might be a tall order even if it were possible.

A Former User

@quicksilver Okay. Dhewm is more useful then.

For OpenJK what cmake args did you use? Besides the files listed in the build documentation did you need to install anything else into the /opt folder?

Did you do install Jedi Outcast too or only Jedi Academy?

quicksilver

@gderber I only installed jedi academy so far. Jedi outcast is considered WIP and doesnt look like its been touched in a while. I wasnt sure what state it was in, and I am mainly interested in ports that will allow playing all the way through the single player campaign with minimal issues. Ill probably try it out eventually though.

To make JK:Jedi Academy I first installed dependencies.

sudo apt-get update && sudo apt-get install libjpeg8-dev libpng12-dev zlib1g-dev freeglut3-dev cmake git libsdl2-dev

Cloned the repository

git clone https://github.com/JACoders/OpenJK.git jka

and compiled

cd jka 
mkdir build
cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/jka/ 
make -j4
make install

Then I copied the game files from my windows installation to ~/jka/JediAcademy/

Then I run the game with

/home/pi/jka/JediAcademy/openjk_sp.arm

mitu

@quicksilver said in Suggestions for ports:

If anyone has the skills and time to help me with that please let me know and I would be glad to walk anyone through how to build these game engines on the pi.

Fork the RetroPie-Setup on Github and add your ports there, I could review your additions and provide suggestions.

A Former User

@mitu Do you mind looking at some of mine?
Doom3 BFG:
https://raw.githubusercontent.com/gderber/RetroPie-Setup/feature/doom3_bfg/scriptmodules/ports/rbdoom3_bfg.sh

Patch for wolf4sdl:
https://github.com/RetroPie/RetroPie-Setup/pull/3163

The following are partially tested. Haven't tried running it yet (I'm on a ssh connection to my retropie system):
Gzdoom:
https://raw.githubusercontent.com/gderber/RetroPie-Setup/feature/gzdoom/scriptmodules/ports/gzdoom.sh

OpenJK (JediAcademy); build / install tested.:
https://raw.githubusercontent.com/gderber/RetroPie-Setup/feature/openjk_ja/scriptmodules/ports/openjk_ja.sh

ROTT: Updates and bugfixes to ZeroJay's ROTT install script
https://raw.githubusercontent.com/gderber/RetroPie-Setup/feature/rott/scriptmodules/ports/rott.sh

Decaf-Emu
https://raw.githubusercontent.com/gderber/RetroPie-Setup/feature/decaf/scriptmodules/emulators/decaf.sh

Dhewm3
https://raw.githubusercontent.com/gderber/RetroPie-Setup/feature/dhewm3/scriptmodules/ports/dhewm3.sh

quicksilver

@mitu I appreciate the offer, as always you are a big help! Now to learn the ins and outs of GitHub. :)

And also a little preview of what I have working
Doom 3 with classic Doom mod:

Jedi knight -jedi academy running in 1600x1200 resolution:

ExarKunIv

@quicksilver dam those look nice.

how well does doom3 play?

quicksilver

@ExarKunIv it's playable at 640x480 on lowest graphical settings and with my pi 4 overclocked (I'll try without overclock soon just for a comparative baseline). Game runs pretty much fullspeed this way except when there are a lot of lighting effects happening at once, in which case there are noticable frame-rate dips. So far I haven't encountered any game breaking bugs and I feel like the game can be completed. I also have classic doom mod and resurrection of evil expansion running. Only real issue I have encountered is that when launching the game through runcommand and an x session (x is required, otherwise there are game breaking graphical issues), quitting the game closes the game but not the x session so you are left at a black screen. Cntrl-alt-backspace closes the x session so I'm using that as a work around for right now.

ExarKunIv

@quicksilver very cool

i saw your post about the x session issue. its cool that we can get these working and in the future it will exit smoothly. from my take on what buzz said.

im more the happy to wait as long as there is a work around. which there is.

great work on all of this. im still on the Pi3 so anything i do it dated and most likely not working on my rig.
but hey it all about learning right :)

quicksilver

@ExarKunIv openjk is running really well on my pi 4 I suspect you could follow my above directions to get it running on your pi 3. I bet it would be playable.

ExarKunIv

@quicksilver might give that a try

ExarKunIv

@quicksilver i get a internal compiler error

but im still on 4.5.14 since that is the only version i can get Nblood to work on. so im not surprised about getting errors
im not that worried about it. most of these will wait till i have a Pi4.

mitu

@ExarKunIv said in Suggestions for ports:

@quicksilver i get a internal compiler error

It sometimes happens when you're out of memory. Likely un-noticeable on a Pi4 with 2 or 4Gb of RAM.

quicksilver

@mitu If thats the case could he just increase the amount of swap?

mitu

@gderber said in Suggestions for ports:

Doom3 BFG:
https://github.com/gderber/RetroPie-Setup/tree/feature/doom3_bfg

Looks good overall.

Incorrect license header - missing the license type (GPL3). See how other modules are adding it. It's important when generating the package license summary page (https://retropie.org.uk/stats/licences/).
missing help header (rp_module_help) - should at least indicate where you should copy your game files (.pk4).
md_ret_requires should be a file, not a folder, indicating the build process has completed succesfully.
run make clean during the build, so it always starts with a clean build.
game_data_doom3_bfg doesn't do much, fold it into configure. If the folder should be user writable, use mkUserDir instead of a simple mkdir (remember that the setup script runs as root).
addPort in configure looks wrong - look up the function definition in helpers.sh or how it's used in other scriptmodules. Last parameter should be the launch command.

https://github.com/gderber/RetroPie-Setup/tree/feature/wolf4sdl

Looks fine, but I don't know this port enough to know if the line removed is ok or not.

General comments for all the .sh files

use hard tabs for indentation (see the weird spacing in game_data_doom3..)
don't have 2 empty new lines.

A Former User

@mitu Thank you!

For the Wolf4SDL script, the removed line, I had based that on this comment on the Hexen2 pull request. I changed it back, and the other non-essential change, swapping the order of the if statement checking for the *.sod and *.sdm files. I swapped the order so it'd match the order for the main wolfenstein data files.

In both cases, they are not a requirement for the actual goal of getting a start-up script for a unified SOD launcher. So now a total of 2 lines added, no other changes.

For the rest thank you for looking at them, the feedback helped me a lot with these.

A Former User

All:

My OpenJK script "works for me"

You can find it here:
https://raw.githubusercontent.com/gderber/RetroPie-Setup/feature/openjk_ja/scriptmodules/ports/openjk_ja.sh

If anyone wants to try it, I'd really appreciate the feedback.

quicksilver

@gderber Ill try it out on my test setup and report back

quicksilver

I have literally spent all day on this, I bring you Morrowind via OpenMW! Currently launching directly through RetroPie with controller support. Performance is good :)

This is the last one on my list for now. So next I plan to do some additional testing and then I will write up build instructions for the ports I have working well.

A Former User

I found a couple bugs in my script. I'll post an update shortly.