Getting the best N64 experience on a Pi 4

roslof

@quicksilver said in Getting the best N64 experience on a Pi 4:

Unfortunately you can set per game settings using standalone mupen64plus-gliden64.

I think you meant can't. And if so:

:O

Wow.

BreadPie

@dankcushions Really excited about the Glide64 option and the other improvements, thanks for the update. I'd noticed a reference to it on Twitter (here: https://twitter.com/m4xwdev ) but didn't know when that might be coming.

I was curious if anyone recalls when -next became the default N64 emulator? Was that the case in the 4.6 image? I realize I can change it to whatever my heart desires, but that's the problem, my heart has desired me to switch between things so many times that I no longer remember how it started out!

roslof

@BreadPie you could always:

Close lr-mupen64plus-next if it is running
Backup /opt/retropie/configs/n64/retroarch-core-options.cfg
Edit the config, removing lines that start with mupen64plus-next
Save your edits
Run Next
Quit Next

That should regenerate and save default options.

dankcushions

@roslof said in Getting the best N64 experience on a Pi 4:

@quicksilver said in Getting the best N64 experience on a Pi 4:

Unfortunately you can set per game settings using standalone mupen64plus-gliden64.

I think you meant can't. And if so:

:O

Wow.

well, i think fundamentally mupen64plus options don't really work that way, and never will. that's why libretro exists - to fork these various standalone emulators and interface them with an API that allows more sophistication.

however i'm hoping that this kind of option micro-management won't be needed shortly:)

Nakynaw

Can't wait to set this one up and see if there is any perceptible improvement in speed with the 8G of ram. But I've read that the difference would be very small, right?

dankcushions

@Nakynaw no difference. it will be the same as a 1GB pi4. ram is hardly used at all

roslof

@quicksilver said in Getting the best N64 experience on a Pi 4:

@roslof I use gliden64 for goldeneye

Hey @quicksilver, I spent some time with GoldenEye & lr-parallel. As expected, you were right about a multiplayer issue. Here is what I found:

GFX Plugin: Auto (glide64)

640x480:
2 window split screen is perfect.
4 window split screen yields flickering for P3 and P4.

320x240
All multplayer is perfect (albeit lo-res)

GFX Plugin: rice
Too much wrong with this. Don't waste your time ;-)

GFX Plugin: gln64
"Works" at 640x480, but with terrible wall and floor textures.

I still would recommend 640x480 glide64 here for 1P/2P gameplay, and advise lowering to 320x240 glide64 for 3P/4P -- or use stand-alone GLide-N64 as you mentioned. Wish "hires" was a bit faster. Can't quite get to a clean game without stutters.

AdamBeGood

Sorry to bang on about Perfect Dark again, but are other people able to run it happily with mupen64plus-GLideN64-highres? My Pi will run it, but I wouldn't say it was as playable as the normal mupen64plus-GildeN64.

I just want to know if my Pi is an outlier or not. An easy test is on Mission 2 - Carrington Villa. After the initial section with the negotiator, my music is a bit choppy as I move through the level. It doesn't make for a pleasant playthrough really. I would just stick with normal mupen64plus-GlideN64 but as the game looks so much better in the high-res core, I feel I have to ask the question. I love Perfect Dark.

I also tried Lr-Mupen64plus-next because of the previous suggestion, but the Night Vision section doesn't work for me on that. My screen just stays black. Edit - I am talking bobbins here. It works fine.

George Spiggott

I run it in Mupen64 Plus Next in forced widescreen at the lowest screen resolution (640x360 iirc). It runs well in that resolution.

quicksilver

@AdamBeGood you're asking too much of your pi 4. Gliden64-hires is basically doubling the original resolution, that's a tall order to fill for a $35 ARM computer. Unfortunately in this situation you won't be able to have your cake and eat it too ;). Some N64 games can run well with hires mode but that should just be viewed as a bonus not the norm.

For mupen64plus-next you need to make sure color to rdram is set to async otherwise the camspy etc will not work properly. I expect performance to be considerably worse than standalone mupen64plus-gliden64.

AdamBeGood

@quicksilver Fair enough! I'm sorry... It just seems fairly close in the high-res version, it isn't miles away from being playable. When I saw that core was noted on the spreadsheet as the recommended emulator, I just wanted to make sure I didn't have some dodgy setting in my config.

quicksilver

@AdamBeGood said in Getting the best N64 experience on a Pi 4:

Fair enough! I'm sorry... It just seems fairly close in the high-res version

No need to be sorry, it's all a learning experience. Yes it can be frustrating when the performance is almost there but not quite.

George Spiggott

@AdamBeGood If you haven't already tried it, lowering the screen resolution in Retropie (down from 1080p) and lowering the audio latency (down from 64) can both have beneficial effects for emulators that are nearly fast enough.

@roslof Great work on the emulation guide. One tiny omission, I only run SotE in 320x240 with MSAA, not widescreen. AFAIK the game has no widescreen support.

There's a list of games that have widescreen support here: https://www.racketboy.com/forum/viewtopic.php?f=2&t=41744

I imagine that they all look better with widescreen enabled. I will attempt to find out with as many as I can.

Banjo-Tooie
Donkey Kong 64
GoldenEye 007
Perfect Dark (tested, yes it does)
The World is not Enough

Nakynaw

Hey Guys, until the N64 emulators get a major update, have we reached some consensus on anything about the tweaking of our Pi 4?

Its seems like the only consensus is about hybrid filter off and overclocking with hdmi_enable_4k60=1, v3d_freq=800ish and arm_freq+2000ish...

Speaking of which, I wondering, is «v3d_freq=830» really better than «gpu_freq=750»? Cause, I thought ISP, H264 and V3D were all on the same PLL and that ISP and H264 could not go higher than 750... So, when we set V3D at 830, does it really do that or it just max at 750 with the rest?

Also does everyone agree on «color to rdram is set to async»?

Skipframe, FBemulation, FXAA all seems like we are not all of the same opinion.

I am looking for a setup that would run most games with either Next or GlideN64 without making specific configs other than the emulators .cfg

George Spiggott

@Nakynaw You don't need to overclock the CPU at all to run N64. V3D overclocking is the only part of the GPU that a Pi4 needs for any emulation currently. My V3D is set very high, perhaps too high for some. It is stable on MY Pi, in the sense that I Have not encountered games won't work or any instability generally. However I have never run my Pi through a genuine stress test.

lucaparzival2022

@George-Spiggott I overclock my pi4 to 2.0 Ghz and every game I've tried works great.

George Spiggott

@lucaparzival2022 I have too but it really has no effect on N64 emulation. Don't take my word for it, take the overclock off and test it for yourself. CPU overclocking isn't even needed on a Pi3.

Ka

I have to say I’m really impressed by the performance of Goldeneye on Parallels. It runs so much better than on any other emulator; you can even run it at 60fps! It’s not perfect at full speed like that - it slows down a fair bit, and you get a lot of screen tearing. But it slowed down a lot on original hardware anyway, and Goldeneye looks and plays wonderfully at 60fps. It feels incredibly responsive, and the animation is fantastically smooth.

The only real issue is that some of the textures have huge black lines across them, like tramlines. It’s particularly noticeable on the open Siberian levels, where the black lines cover the snow textures, but it’s not too distracting.

AdamBeGood

@Nakynaw said in Getting the best N64 experience on a Pi 4:

Its seems like the only consensus is about hybrid filter off and overclocking with hdmi_enable_4k60=1, v3d_freq=800ish and arm_freq+2000ish...

I thought there was some controversy around 4k60=1 also, I am sure someone questioned the benefit of that.

It's really good that you are asking the questions though, it would be good to have this stuff nailed down to some degree.

Also does everyone agree on «color to rdram is set to async»?

Where is this option? Is this in the standalone mupen config, or is this a Retroarch menu setting? Not sure what I have mine set as.

ReadyPlayaWon

@AdamBeGood said in Getting the best N64 experience on a Pi 4:

Where is this option? Is this in the standalone mupen config, or is this a Retroarch menu setting? Not sure what I have mine set as.

you can find it in ... /opt/retropie/configs/n64/mupen64plus.cfg

if you search within the mupen64plus.cfg file for rdram you'll find multiple references, but the one relating to color is this one ...

# Enable color buffer copy to RDRAM (0=do not copy, 1=copy in sync mode, 2=Double Buffer, 3=Triple Buffer)
EnableCopyColorToRDRAM = 1

or just disable in the menu

alt text