Turrican (hurricane clone) black screen

DavidDraper

@jengun Thanks Jengun. Anyone know how to install that one in a way that shows up in the ports list in emulation station?

David

JenGun

@DavidDraper

Anyone know how to install that one in a way that shows up in the ports list in emulation station?

Just change line # 39 in the file hurrican.sh to:

make TARGET=linux_GL2

... seems that SDL2 is also supported and it runs on the console with KMS/DRM ...

DavidDraper

@jengun wow thanks. Where is the hurricane.sh file located in the file system? Sorry for the noob question. Finding will save me a bunch of time.

Dave

DavidDraper

Man did I stick my foot in it...

Help!

I checked the only place I could think of, (/home/pi/RetroPie-Extra/scriptmodules/ports/) and the script file was there. I edited line 39 as JenGun said and ran the script from RetroPie Setup.

Everything seemed to go great for a few minutes and then I got the following error message:

could not successfully install Hurrican
/home/pi/RetroPie-Setup/tmp/build/hurrican/Hurrican/hurrican not found.

I clicked ok and got the next message:

please see 
/home/pi/RetroPie-Setup/logs/rps_2021_01_01141435.log.gz for more information in depth information regarding errors

I checked the location and downloaded the file; the total text file is 10.2 MB and too big to fit into pastebin, unless you have a pro account and you currently can't get a pro account. I did paste the last section of the log in there and it can be found here: [link](link URL).

I'm running RetroPie 4.7.1 on a Raspberry Pi 4, 4 GB RAM,
(updated from a 4.6 image downloaded in July of 2020 from this website)
Vilros power cord
128 GB flash memory card

Thanks for any advice in advance.

David

JenGun

@daviddraper My bad: the binary is called hurricanlinux, so you have also to edit line # 70 in hurrican.sh:

addPort "$md_id" "hurrican" "Hurrican" "pushd $md_inst; $md_inst/hurricanlinux; popd"

like line # 72 ...

Maybe line 16 needs to be changed too:

rp_module_flags="dispmanx !mali"

I'm fiddling with the SDL2 version ... should be better suited for the Raspberry Pi 4 ...

DavidDraper

@jengun Thanks, JenGun. I'll try it.

Cheers,

David

DavidDraper

@jengun Made the changes, but I got the same set of error messages after running the install. I went to the end of the 10.2 MB log file and had an identical end to that log:

= = = = = = = = = = = = = = = = = = = = =
Installing 'hurrican' : Hurrican - Turrican Clone
= = = = = = = = = = = = = = = = = = = = =

/home/pi
Could not successfully install Hurrican - Turrican Clone (/home/pi/RetroPie-Setup/tmp/build/hurrican/Hurrican/hurrican not found).

Log ended at: Fri  1 Jan 15:26:30 CST 2021
Total running time: 0 hours, 6 mins, 16 secs

Any ideas?

JenGun

@DavidDraper One more change in line # 49 to:

'Hurrican/hurricanlinux'

like line # 58 ... should work now ...

DavidDraper

@jengun I'll try it. Fingers crossed.

Dave

JenGun

@daviddraper Please use this hurrican.sh: it uses SDL2 with KMS/DRM, so you don't need to boot into the LXDE desktop. The resolution is still 640x480 ...

#!/usr/bin/env bash

# This file is part of The RetroPie Project
# 
# The RetroPie Project is the legal property of its developers, whose names are
# too numerous to list here. Please refer to the COPYRIGHT.md file distributed with this source.
# 
# See the LICENSE.md file at the top-level directory of this distribution and 
# at https://raw.githubusercontent.com/RetroPie/RetroPie-Setup/master/LICENSE.md
#

rp_module_id="hurrican"
rp_module_desc="Hurrican - Turrican Clone"
rp_module_help="Hurrican can only be played in 640x480 so to avoid huge black borders everywhere, use runcommand to set Hurrican to run at 640x480 or 720x480 if aspect ratio matters to you. There are minor off-by-one errors in the graphics everywhere. Nothing I can do about that at the moment so please do not report it as a bug to me, but upstream instead."
rp_module_section="exp"
rp_module_flags="!mali"

function depends_hurrican() {
    local depends=(subversion libsdl2-dev libsdl2-mixer-dev libsdl2-image-dev libmodplug-dev libgl-dev)

    getDepends "${depends[@]}"
}

function sources_hurrican() {
    svn checkout svn://svn.code.sf.net/p/hurrican/code/trunk "$md_build"
    if isPlatform "rpi"; then
        sed -i 's/USE_EGL := yes/USE_EGL := no/' "$md_build/Hurrican/src/Makefile"
        sed -i 's/-DRPI -DUSE_GLES2 -DUSE_EGL_RPI/-DLINUX -DUSE_HOME_DIR -DUSE_GLFULL/' "$md_build/Hurrican/src/Makefile"
        sed -i 's/-I\/usr\/include\/SDL/-I\/usr\/include\/SDL2/' "$md_build/Hurrican/src/Makefile"
        sed -i 's/-I\/opt\/vc\/include -I\/opt\/vc\/include\/interface\/vcos\/pthreads -I\/opt\/vc\/include\/GLES2 -I\/opt\/vc\/include\/EGL/-I\/usr\/include\/GL/' "$md_build/Hurrican/src/Makefile"
        sed -i 's/-L\/opt\/vc\/lib -g -lmodplug -lSDL_mixer -lSDL_image -lSDL -lGLESv2/-lSDL2 -lSDL2_mixer -lSDL2_image -lmodplug -lGL -lpthread/' "$md_build/Hurrican/src/Makefile"
    fi
}

function build_hurrican() {
    cd $md_build/Hurrican/src/
    if isPlatform "rpi"; then
       make TARGET=rpi
    else
       make
    fi
    md_ret_require="$md_build"
}

function install_hurrican() {
    if isPlatform "rpi"; then
        md_ret_files=(
            'Hurrican/hurrican'
            'Hurrican/data'
            'Hurrican/lang'
            'Hurrican/splashscreen.bmp'
            'Editor/maps'
            'Editor/Gfx'
        )
    else
        md_ret_files=(
            'Hurrican/hurricanlinux'
            'Hurrican/data'
            'Hurrican/lang'
            'Hurrican/splashscreen.bmp'
            'Editor/maps'
            'Editor/Gfx'
        )
    fi
}

function configure_hurrican() {
    if isPlatform "rpi"; then
        addPort "$md_id" "hurrican" "Hurrican" "pushd $md_inst; $md_inst/hurrican; popd"
    else
        addPort "$md_id" "hurrican" "Hurrican" "pushd $md_inst; $md_inst/hurricanlinux; popd"
    fi

    mkRomDir "ports"
    moveConfigDir "$home/.hurrican" "$md_conf_root/hurrican"
    touch "$md_inst/Hurrican.cfg"
    touch "$md_inst/Hurrican.hsl"
    touch "$md_inst/Game_Log.txt"
    touch "$md_inst/Savegame0.sav"
    chown pi:pi "$md_inst/Hurrican.cfg"
    chown pi:pi "$md_inst/Hurrican.hsl"
    chown pi:pi "$md_inst/Game_Log.txt"
    chown pi:pi "$md_inst/Savegame0.sav"
}

DavidDraper

@jengun Ugg. Thanks for taking the time to get that written up. I have the same error message.

I used Atom to open up the error logs and I found the following message 184 times in the each log:

./cml/cml/mathlib/checking.h: In function ‘void cml::detail::CheckVecN(const VecT&, cml::fixed_size_tag)’:
./cml/cml/core/cml_assert.h:94:27: warning: typedef ‘__bogus_assert_type_64’ locally defined but not used [-Wunused-local-typedefs]
         ::result CML_JOIN(__bogus_assert_type_, __LINE__)
                           ^~~~~~~~~~~~~~~~~~~~
./cml/cml/core/cml_assert.h:27:27: note: in definition of macro ‘CML_DO_JOIN2’
 #define CML_DO_JOIN2(X,Y) X##Y
                           ^
./cml/cml/core/cml_assert.h:25:23: note: in expansion of macro ‘CML_DO_JOIN’
 #define CML_JOIN(X,Y) CML_DO_JOIN(X,Y)
                       ^~~~~~~~~~~
./cml/cml/core/cml_assert.h:94:18: note: in expansion of macro ‘CML_JOIN’
         ::result CML_JOIN(__bogus_assert_type_, __LINE__)
                  ^~~~~~~~
./cml/cml/mathlib/checking.h:64:5: note: in expansion of macro ‘CML_STATIC_REQUIRE_M’
     CML_STATIC_REQUIRE_M(((size_t)VecT::array_size == N), ErrorT);

This is the only time the string "error" shows up in the log.

Here is an example of the log that contains that passage:

g++ -c -O2 -Wall -fsingle-precision-constant -fno-rtti -I. -I./SDLPort -I./cml -I/usr/include -I/usr/include/SDL -I/usr/include/GLES2 -I/usr/include/libmodplug -DPLATFORM_SDL -DENABLE_CONSOLE_COMMANDS -DUSE_MODPLUG -DUSE_INDEXED_BATCH -DLINUX -DUSE_HOME_DIR -DUSE_GLES2 -DUSE_EGL_SDL -DUSE_GL2 -DUSE_FBO Boss_RiesenSpinne.cpp -o Boss_RiesenSpinne.o
In file included from ./cml/cml/et/size_checking.h:20,
                 from ./cml/cml/vector/vector_expr.h:17,
                 from ./cml/cml/vector/vector_ops.h:17,
                 from ./cml/cml/vector.h:50,
                 from ./cml/cml/cml.h:66,
                 from ./SDLPort/SDL_port.h:36,
                 from DX8Joystick.h:28,
                 from DX8Input.h:25,
                 from Console.h:18,
                 from stdafx.h:6,
                 from Boss_RiesenQualle.cpp:7:
./cml/cml/mathlib/checking.h: In function ‘void cml::detail::CheckVec(const VecT&)’:
./cml/cml/core/cml_assert.h:94:27: warning: typedef ‘__bogus_assert_type_55’ locally defined but not used [-Wunused-local-typedefs]
         ::result CML_JOIN(__bogus_assert_type_, __LINE__)
                           ^~~~~~~~~~~~~~~~~~~~
./cml/cml/core/cml_assert.h:27:27: note: in definition of macro ‘CML_DO_JOIN2’
 #define CML_DO_JOIN2(X,Y) X##Y
                           ^
./cml/cml/core/cml_assert.h:25:23: note: in expansion of macro ‘CML_DO_JOIN’
 #define CML_JOIN(X,Y) CML_DO_JOIN(X,Y)
                       ^~~~~~~~~~~
./cml/cml/core/cml_assert.h:94:18: note: in expansion of macro ‘CML_JOIN’
         ::result CML_JOIN(__bogus_assert_type_, __LINE__)
                  ^~~~~~~~
./cml/cml/mathlib/checking.h:53:5: note: in expansion of macro ‘CML_STATIC_REQUIRE_M’
     CML_STATIC_REQUIRE_M(
     ^~~~~~~~~~~~~~~~~~~~
./cml/cml/mathlib/checking.h: In function ‘void cml::detail::CheckVecN(const VecT&, cml::fixed_size_tag)’:
./cml/cml/core/cml_assert.h:94:27: warning: typedef ‘__bogus_assert_type_64’ locally defined but not used [-Wunused-local-typedefs]
         ::result CML_JOIN(__bogus_assert_type_, __LINE__)
                           ^~~~~~~~~~~~~~~~~~~~
./cml/cml/core/cml_assert.h:27:27: note: in definition of macro ‘CML_DO_JOIN2’
 #define CML_DO_JOIN2(X,Y) X##Y
                           ^
./cml/cml/core/cml_assert.h:25:23: note: in expansion of macro ‘CML_DO_JOIN’
 #define CML_JOIN(X,Y) CML_DO_JOIN(X,Y)
                       ^~~~~~~~~~~
./cml/cml/core/cml_assert.h:94:18: note: in expansion of macro ‘CML_JOIN’
         ::result CML_JOIN(__bogus_assert_type_, __LINE__)
                  ^~~~~~~~
./cml/cml/mathlib/checking.h:64:5: note: in expansion of macro ‘CML_STATIC_REQUIRE_M’
     CML_STATIC_REQUIRE_M(((size_t)VecT::array_size == N), ErrorT);
     ^~~~~~~~~~~~~~~~~~~~
./cml/cml/mathlib/checking.h: In function ‘void cml::detail::CheckVec2Or3(const VecT&, cml::fixed_size_tag)’:
./cml/cml/core/cml_assert.h:94:27: warning: typedef ‘__bogus_assert_type_116’ locally defined but not used [-Wunused-local-typedefs]
         ::result CML_JOIN(__bogus_assert_type_, __LINE__)
                           ^~~~~~~~~~~~~~~~~~~~

:-/

David

JenGun

@daviddraper Yes, patching Makefiles is ugly and error prone ... of course it works here ... ;-) To rule out the usual copy and paste problems:

$ sha1sum hurrican.sh

should show

2a27b0383b1b9be7251a6d189309d5036c14521b  hurrican.sh

Some compiler macros like -DUSE_GLES2 -DUSE_EGL_SDL -DUSE_GL2 -DUSE_FBO (which causes to error above) should not be there, but -DUSE_GLFULL is missing ... seems that the target is still linux_GL2 and not rpi in the Makefile ... did you "Update (from source)" in RetroPie setup?

DavidDraper

@jengun ok- wierd. I ran

sha1sum hurrican.sh

and got

97fd14f14448a1035db77d3ee5e1d4701726dd63  hurrican.sh

So! Not the same file. I tried renaming the current file to hurricanold.sh and creating a new file, named it hurrican.sh, and copied and pasted the contents from your post (which I thought I had done yesterday) and when I ran the same command on the new file, I got:

7b7c52eadc1f1dbd54af707328d3f68402be3145  hurrican.sh

still not the same as your file. I am using WinSCP to SSH into the raspberry pi; yesterday I used Atom to edit the file and today I used SSH's built-in text editor. Does the editor make a difference? I could try nano if it does.

Thanks.

David

JenGun

Next try: the new TARGET sdl2 makes it possible to run Hurrican in full resolution on the Raspberry Pi 4 with "Buster" (KMS/DRM on console and LXDE desktop)

Index: src/Makefile
===================================================================
--- src/Makefile	(revision 286)
+++ src/Makefile	(working copy)
@@ -264,6 +264,25 @@
 
 endif
 
+ifeq ($(TARGET),sdl2)
+
+EXE := ../hurrican
+CXX := g++
+CC  := gcc
+LD  := g++
+RM  := rm -f
+
+USE_EGL := no
+USE_GL2 := yes
+USE_FBO := yes
+
+DEFINES += -DLINUX -DUSE_HOME_DIR -DUSE_GLFULL
+
+INCLUDES_OS := -I/usr/include -I/usr/include/SDL2 -I/usr/include/GL -I/usr/include/libmodplug
+LDFLAGS := -g -lSDL2 -lSDL2_mixer -lSDL2_image -lmodplug -lGL
+
+endif
+
 INCLUDES := -I. -I./SDLPort -I./cml $(INCLUDES_OS)
 
 COMMON_CXXFLAGS := -Wall -fsingle-precision-constant -fno-rtti
@@ -316,7 +335,7 @@
 ##     to avoid numerous spurious warnings compiling against CML libary:
 ##     This will convert a version number like 4.8.1 to 4*100+8 and a version
 ##     number like 4.10.2 to 4*100+10, allowing direct comparison through bc.
-GCC_VER_GTE48 := $(shell echo `$(CXX) -dumpversion | cut -f1-2 -d.` \>= 4.8 | sed -e 's/\./*100+/g' | bc )
+GCC_VER_GTE48 := $(shell echo `${CXX} -dumpversion | cut -f1-2 -d.` \>= 4.8 | sed -e 's/\./*100+/g' | bc )
 ifeq ($(GCC_VER_GTE48),1)
 COMMON_CXXFLAGS += -Wno-unused-local-typedefs
 endif
Index: src/SDLPort/cfbo.cpp
===================================================================
--- src/SDLPort/cfbo.cpp	(revision 286)
+++ src/SDLPort/cfbo.cpp	(working copy)
@@ -77,7 +77,11 @@
         case GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT:
             Protokoll.WriteText( false, "GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT: Not all framebuffer attachment points are framebuffer attachment complete.\n" );
             break;
+#ifdef PLATFORM_SDL
+        case GL_FRAMEBUFFER_INCOMPLETE_DIMENSIONS_EXT:
+#else
         case GL_FRAMEBUFFER_INCOMPLETE_DIMENSIONS:
+#endif
             Protokoll.WriteText( false, "GL_FRAMEBUFFER_INCOMPLETE_DIMENSIONS: Not all attached images have the same width and height.\n" );
             break;
         case GL_FRAMEBUFFER_INCOMPLETE_MISSING_ATTACHMENT:

$ svn checkout svn://svn.code.sf.net/p/hurrican/code/trunk
$ cd trunk/Hurrican/src
$ svn patch /path/to/the/above/patch
$ make TARGET=sdl2

should create a working binary ...

DavidDraper

@jengun thanks for your patience and help. I need a little more expanation right now though. Is this is a little beyond me. Is the new file something be added to hurrican.sh? A new file? What should it be called and where should it be saved?

Also, if i don't have the same hash for the hurrican.sh doesnt that mean something in the hurrican.sh file is off?

Gratz in advance.

Dave

DavidDraper

@jengun to answer your question about updating from source, the only option for hurrican when installing from reptropie setup is to install from source; I added retropie-extra to my install pie and it the way it is written there is no option to install from a pre-compiled binary, at least on my system. I think I did run an update script for RetroPie-Extra recently (two or three weeks ago?) As part of some generally updating i did on the RetroPie jnstall, b.ut I'm not sure it made a difference. I don't think RetroPie-Extra been updated at github in a while. I don't recall if I updated RetroPie-Extra from source or a pre-compiled binary.

D

JenGun

@daviddraper:

Is the new file something be added to hurrican.sh? A new file?

Yes, the first part is a subversion patch file, there is no connection to hurrican.sh at this moment: this is just a test of whether the binary works at all ...

What should it be called and where should it be saved?

Save it in the home directory (/home/pi) on the Raspberry Pi under a name of your choice, e.g. hurrican-sdl2.patch, so the above commands to execute should like this:

$ svn checkout svn://svn.code.sf.net/p/hurrican/code/trunk
$ cd trunk/Hurrican/src
$ svn patch /home/pi/hurrican-sdl2.patch
$ make TARGET=sdl2
$ cd ..
$ ./hurrican

The binary should start in fullscreen mode, integration with hurrican.sh will follow, but needs some time ...

DavidDraper

Hey @jengun

For this newb, this is pretty cool stiff!

I created the file in Atom, named it hurrican.sh and put it in /home/pi via SSH.

I entered

svn checkout svn://svn.code.sf.net/p/hurrican/code/trunk

and a series of output lines, ending with:

.... (lots of lines like the ones below)
A    trunk/Editor/src/DX8Font.cpp
A    trunk/Editor/src/resource.h
A    trunk/Editor/src/Logdatei.h
A    trunk/Editor/Editor.dsp
A    trunk/Editor/Editor.suo
A    trunk/Editor/MainMenu.aps
A    trunk/Editor/MainMenu.rc
A    trunk/Editor/Editor v1.plg
Checked out revision 286.

I entered the rest and here is what I got:

pi@RetroPi:~ $ cd trunk/Hurrican/src
pi@RetroPi:~/trunk/Hurrican/src $ svn patch /home/pi/hurrican-sdl2.patch
C         src/Makefile
>         rejected hunk @@ -264,6 +264,25 @@
>         rejected hunk @@ -316,7 +335,7 @@
C         src/SDLPort/cfbo.cpp
>         rejected hunk @@ -77,7 +77,11 @@
Summary of conflicts:
  Text conflicts: 2
pi@RetroPi:~/trunk/Hurrican/src $ make TARGET=sdl2
rm -f *.o SDLPort/*.o unrarlib040/unrarlib/*.o
pi@RetroPi:~/trunk/Hurrican/src $ cd ..
pi@RetroPi:~/trunk/Hurrican $ ./hurrican
-bash: ./hurrican: No such file or directory
pi@RetroPi:~/trunk/Hurrican $ ./Hurrican
-bash: ./Hurrican: No such file or directory

Dave

JenGun

@daviddraper

I created the file in Atom, named it hurrican.sh and put it in /home/pi via SSH.

OK, enough with Atom's copy and paste weirdness: please SSH to your Raspberry and execute this command to get the file:

curl -LJO "https://gitlab.com/jengun/Hurrican/-/raw/master/hurrican-sdl2.patch"

DavidDraper

@jengun ok...

pi@RetroPi:~ $ curl -LJO "https://gitlab.com/jengun/Hurrican/-/raw/master/hurrican-sdl2.patch"
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0Warning: Failed to create the file hurrican-sdl2.patch: Permission denied
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
curl: (23) Failed writing header
pi@RetroPi:~ $ sudo curl -LJO "https://gitlab.com/jengun/Hurrican/-/raw/master/hurrican-sdl2.patch"
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  1445    0  1445    0     0  13256      0 --:--:-- --:--:-- --:--:-- 13256
pi@RetroPi:~ $

Dave