Start + Select on USB SNES Controller not working

BuZz

I would need to see those config files to advise - you can try setting the order in the configuration editor to see if that helps.

BrockBoyts

@BuZz

Here are the configs you requested.

/opt/retropie/configs/all/retroarch.cfg: http://pastebin.com/HTWaqzSK
/opt/retropie/configs/snes/retroarch.cfg: http://pastebin.com/QUbeYxdD

Where is the configuration editor?

BuZz

available from retropie-setup and also on the main retropie menu. The

https://github.com/retropie/retropie-setup/wiki/Configuration-Editor

go to basic options - choose emulator (or all for global) and set "Choose joypad order"

there is also this third party tool from meleu - https://github.com/meleu/RetroPie-joystick-selection

BuZz

When I said about your controller not working at all, I got confused with another topic. I am currently replying to far too many users at once - and I have no idea what is what anymore ;-)

BuZz

Please can I see your other controller configuration also (the one which the hotkeys don't work on) - from /opt/retropie/configs/all/retroarch-joypads

BrockBoyts

@BuZz

It's all good man. You can tell who is super helpful on here and you are one of them. I appreciate all that you are doing. I couldn't do this without the support of everyone on the forums.

I think I got slightly confused too. The topic for this issue is about my Start+Select. I realized you and I discussed this already and came to the conclusion it is about which controller I use to launch a game and that controller will have active hotkeys.

Half way through this topic I mentioned my Page up and Page down hotkeys are not working. THAT is when we switched this discussion and maybe things got confusing.

OKAY, so, I need your help getting the page up and page down functionality to work now.

My configs:
2 Player Xin-Mo: http://pastebin.com/1zdHiHaD
USB Snes Controllers: http://pastebin.com/egUNHy30
My etroarch.cfg: http://pastebin.com/HTWaqzSK
My es_input.cfg: http://pastebin.com/NEQvnAyp

BuZz

The es_input.cfg is incorrect - did you edit it manually at any point from the es_temporaryinput.cfg ? as they use different attributes.

Anyway, the leftbottom / rightbottom should be changed to pagedown / pageup

eg

<?xml version="1.0"?>
<inputList>
  <inputAction type="onfinish">
    <command>/opt/retropie/supplementary/emulationstation/scripts/inputconfiguration.sh</command>
  </inputAction>
  <inputConfig type="joystick" deviceName="Xin-Mo Xin-Mo Dual Arcade" deviceGUID="03000000c0160000e105000001010000">
    <input name="a" type="button" id="11" value="1" />
    <input name="b" type="button" id="8" value="1" />
    <input name="down" type="axis" id="1" value="1" />
    <input name="left" type="axis" id="0" value="-1" />
    <input name="pagedown" type="button" id="2" value="1" />
    <input name="right" type="axis" id="0" value="1" />
    <input name="pageup" type="button" id="5" value="1" />
    <input name="select" type="button" id="9" value="1" />
    <input name="start" type="button" id="10" value="1" />
    <input name="up" type="axis" id="1" value="-1" />
    <input name="x" type="button" id="1" value="1" />
    <input name="y" type="button" id="0" value="1" />
  </inputConfig>
  <inputConfig type="joystick" deviceName="USB,2-axis 8-button gamepad  ">
    <input name="pagedown" type="button" id="5" value="1"/>
    <input name="start" type="button" id="7" value="1"/>
    <input name="pageup" type="button" id="4" value="1"/>
    <input name="up" type="axis" id="1" value="-1"/>
    <input name="a" type="button" id="0" value="1"/>
    <input name="b" type="button" id="1" value="1"/>
    <input name="down" type="axis" id="1" value="1"/>
    <input name="right" type="axis" id="0" value="1"/>
    <input name="select" type="button" id="6" value="1"/>
    <input name="left" type="axis" id="0" value="-1"/>
  </inputConfig>
</inputList>

BrockBoyts

@BuZz

That fixed it. Not sure why those were changed like that.

wmcclelion

This post is deleted!

chameleonkid

Hi guys,

im struggling on some kind of the same problem.

Since id like to use the "ingame save option" its needed to end the emulator in a proper way.
this seems to be working fine with the NES emu, but not for the SNES emulator.

Im using a USB Buffalo SNES controller.

i tried editing several files to get this working, but it seems like my changes didnt affect anything.

Id really appreciate some help here. If i need to load up some of my conigfiles just let me know.

btw sorry for my bad english its not my native language :)

Thx in advance
br
Stefan

chameleonkid

Hi,

here my pastebins:bak:

retroarch.cfg in "ALL":
http://pastebin.com/QuXemUAD

in SNES:
http://pastebin.com/hpj1HkmP

Joypadconfs + bak:

sonyps3:
http://pastebin.com/S6kyy3dx

sonyps3bak:
http://pastebin.com/2C3ChXtC

USB,2-axis8-buttongamepad:
http://pastebin.com/uA0RLKp4

USB,2-axis8-buttongamepadbak:
http://pastebin.com/hzdw6wNV

Since im not too deep into linux/pi/unix thing im not too sure if this might help.

btw im using an ibuffalo snes Gamepad most of the time.
Should i delete the ps3 controllerfiles?

Thx in advance
br
stefan

chameleonkid

Hi again,

since im not able to edit my post.
Here some important information:

Model: Raspberry Pi 3B
Version: Linux 4.4.13-v7+ armv7l GNU/Linux !? (not sure if this is the correct information)

Im pretty sure i used the preconfigured SD-Card image.

BR
Stefan

wesleybilly

I am very new to this and I would like to know how to fix mine. I have the same problem with select / start issue. I have been working on this for two days. How can I get some help?

markyh444

@wesleybilly It'd be best if you started a fresh thread and provided the information from the link: https://retropie.org.uk/forum/topic/3/read-this-first

This thread is a year old and things have moved on since it was posted.