Raspberry Pi 5 - official announcement

mitu

@StuMcBill said in Raspberry Pi 5 - official announcement:

I have Arcade set as my startup system in emulationstation, but it still loads on settings / splash screens? Weird.

Open a separate topic for this. Add your ES configuration file (from $HOME/.emulationstation/es_setting.cfg) and a log file (from $HOME/.emulationstation/es_log.txt).

StuMcBill

@mitu said in Raspberry Pi 5 - official announcement:

@StuMcBill said in Raspberry Pi 5 - official announcement:

I have Arcade set as my startup system in emulationstation, but it still loads on settings / splash screens? Weird.

Open a separate topic for this. Add your ES configuration file (from $HOME/.emulationstation/es_setting.cfg) and a log file (from $HOME/.emulationstation/es_log.txt).

Will do, thanks.

windg

I've tried a little the new Pi. First a big thanks to the developers, RetroPie works very well in its current state, and we are still in the beginning.
The official case is very good, a bit expensive, the fan does a good job and doesn't let the Pi get strangled. The highest temperature I saw was 75 celcious during the building process, the noise is not annoying like in the official Pi4 fan. During the game I never went above 60 celcious.

I have tried some games and emulators that didn't run very well before:

lr-ppsspp:
Grand Theft Auto: Liberty city
Silent Hill Shattered Memories,
Are running ok most of time without frameskip.

lr-dolphin:
Resident Evil Remake
Super Mario Sunshine
Legend Of Zelda -The Wind Waker,
Paper Mario
running ok most off the time with default emulator settings

lr-desmume:
Dragon Quest IV
running ok

lr-beetle-psx:
Gran Turismo 2
Bloody Roar II
running ok

lr-beetle-saturn:
Sonic Jam
Deep Fear
Panzer Dragoon Saga
running ok .

I am using 720p resolution, Bookworm Lite 64bit

hawkes_84

@windg keep up the good work. Unsure if there's a functional PS2 emulator on Retropie you can test but if you could take a look at some point and get back to us :)

retropieuser555

@windg this all sounds bout the same as I've found so far, great job!

what controller do you use? Still finding this weird lr-dolphin controller works in retroarch with hotkeys such as exit, menu toggles but can't for the life of me get it to respond to the game.

windg

@retropieuser555 I have a Logitech F310. I saw your message about Wind Waker, is running full speed, at least in the first stage in the beach .

retropieuser555

Other things you could never do on the pi 4 but I'm trying to stress the pi 5 a bit. Streaming to twitch directly from retroarch. Try lr-snes as an example, I didn't play around with the retroarch cfg except used the default one they suggest but it recorded a reasonable non choppy video

Edit:- Also messing with ubuntu on pi 5 and building RetroPie on top of that managed to get AetherSX2 working and playing.

excuse my gorilla style photography

Wouldn't recommend it though, Emulationstation opens with the desktop turned on, so it's super choppy and Retroarch struggles with that. Weirdly doesn't seem to effect Dolphin and PS2 standalone emulators.

rickd5674

pi5 64bit lite

Does anyone know how to install a ps2 emulator via terminal to use within retropie?
thanks

mitu

@Darksavior said in Raspberry Pi 5 - official announcement:

@mitu No worries, I thought it might be a simple script fix.

I've added a patch for the gamecondriver so that it doesn't install the wrong kernel headers. You may try to update and re-install the driver, but you first should remove the raspberrypi-kernel-headers package and then re-install the linux-headers-rpi-XYZ packages you have installed (there may a couple of them).

Darksavior

@mitu No change. The log is the same as well.

On a side note, I heard Batocera has a ps2 emulator in their pi5 build so I installed it to see which one it was. It has two versions of Play!. The standalone version and the libretro version. I couldn't get the libretro version to work, but the standalone worked and it was very slow. Maybe the standalone can be added in the future?

Also, Batocera has a different ES, and it has a better grid theme. Will RetroPie be updated to that someday or are the branches just too different? RetroPie's ES can't do this (I also want to stop using the Pegasus frontend. It's just a hassle to make it work properly): alt text

mitu

@mitu No change. The log file is the same as well.

If it's the same, then the installation is working.

On a side note, I heard Batocera has a ps2 emulator in their pi5 build so I installed it to see which one it was. It has two versions of Play!. The standalone version and the libretro version. I couldn't get the libretro version to work, but the standalone worked and it was very slow. Maybe the standalone can be added in the future?

Not sure, how does it compare to pcsx2 ?

Also, Batocera has a different ES, and it has a better grid theme. Will RetroPie be updated to that someday or are the branches just too different? RetroPie's ES

If someone adds the changes from @f-caruso's fork (which Batocera uses under the hood), then yes.

Darksavior

@mitu I've never used Play! until now to have an opinion but it might be the only option right now? I don't know if pcsx2 has an arm64 port, but it does have an apple m1 arm port. I tried it on my m1 and Aethersx2 was much better and less buggy. I assume Aethersx2 can't be altered for a non-desktop environment if the Batocera devs decided to use Play! instead.

rickd5674

@Darksavior
I really hope we get AetherSX2 in the future

retropieuser555

@Darksavior did you use the nightly of PCSX2 on your Mac? For me its better than AetherSX2 (Lego Star wars for example has weird lighting glitches I found). Also PCSX2 is in development and open source so it will eventually be our better bet I imagine as there's no editing AetherSX2 (which was a fork of PCSX2 anyway?)

Darksavior

@retropieuser555 Honestly, I didn't give it much of a chance due to the annoying bugs it had like no actual fullscreen or proper resizing. I also couldn't get Valkyrie Profile 2 running properly at the time when sx2 ran it np. It's been a year or two since so it's good to hear it has made improvements to try again. It was also weird that I got better performance in God of War 2 on rpcs3 than on pcsx2.

@rickd5674 Unless someone can make it work without the desktop environment, then it won't be much good for most people. The dev wiped his github and no longer in development. Since the dolphin standalone is still active, then that's more likely for someone to get working.

rickd5674

anyone managed to install yabasanshiro?

the extra scripts libretro version is only installing for pi4 and the standalone fails to install.

rickd5674

@Darksavior Thanks, hopefully we will get some ps2 emulator in the future.

windg

@rickd5674 It's failing yes but you can try lr-beetle-saturn , if i am not wrong, is better emulator. Yabasanshiro it's failing and with 64 bit Bullseye and Bookworm for RPi4.

rickd5674

I know retropie is only in testing phase for pi5 but wanted to share my results so far.

This is with a Pi5 4gb model
Installed ontop of OS 64bit lite today using Pi Imager to write the image.
Using official 27w PSU
all packages updated as of today.
updated OS packages

game simpsons hit & run (europe) - loads to menu then crashes
game starwars squadron leader II (europe) to low framerate
system gamecube
gamecube dolphin - fails to open
gamecube lr-dolphin - fails to load games ive tested or just crashes on menus

volume control errors

restarting emulationstation errors
warning v3d support for hw version 71 is neither a complete nor a conformant opengl implemention. testing use only

3do
fifa - played but felt more sluggish even though audio seemed improved.

virtual jaguar
avp - same as on pi4

dreamcast
flycast not loading
redream 4x4 evo - crashed after loading game

windg

@rickd5674 Ignore volume control error and ES warning message they are harmless. I am not familiar with 3do and jaguar, do you have the bios files? Also try lr-flycast-dev it's working fine so far., check in the experimental packages.