Raspberry Pi 5 - official announcement

mechafatnick

@pjft said in Raspberry Pi 5 - official announcement:

@mechafatnick what Model 1 and 2 games are you running on Mame?

I tried VF2, Sega Rally, VF1 and Star Wars Arcade

Rockofan96

@mechafatnick Have you tried Sonic the fighters aka Sonic Championship?

zaphod24

I've got a rather odd one.. Thanks to the advice here on the kernel, I've been able to get my new pi5 working just like my pi4 with one key exception..

There are some oddities with my 8bitdo SN30 Pro usb controllers. Sometimes when booting up they aren't recognized at all the xpad kernel module doesn't load. Other times they are recognized, but both light up only 1 led indicating they are both "player 1" and only one of them actually is detected and works. The same controllers work fine on my old pi4 setup. I am wondering if it is because the pi5 shows 2 different usb2 buses with 1 device each (and 2 different usb3 buses but the controllers don't need that speed) while the pi4 showed 1 usb2 bus with 2 devices on the same bus.

Any thoughts on how to correct the issue, maybe a boot or kernel module parameter?

ChaosEffect

Re: Model 1 and Model 2 on Pi 5: This is my experience.

Model 1:
Virtua Fighter seems to run at full speed for me, though I am not sure what bugs might exist for this game to be listed as not working. Virtua Racing is a buggy mess. The track and the other racers are all missing. All I see is my own car and the background, and I don't think the controls are working either. The same ROM/BIOS in lr-mame on Windows works fine, though, so something is not right on Pi here. Anybody got any ideas? A similar issue was mentioned on MAME's bug reports but was apparently fixed.

Model 2:
Virtua Fighter 2 runs at about 72% speed for me if I use Libretro MAME 0.222. It's a bit slower than that in current lr-mame for me. Rail Chase 2 is at a completely unplayable 20%ish speed for me.

@mechafatnick what speeds are you getting in VF2 and Sega Rally?

retropieuser555

@windg No worries. Do it go fullscreen for you using XINIT? I found I have to use XINIT-WM that @mitu has added to the runcommand recently. otherwise it opens in a small 480 x 640 window for me

abj

@retropieuser555 I read the instructions but i didn't understand very well what i have to do, i read and your comment that you have issues to exit from the emulator and i leaved it for now. ~windg~

abj

I try to install the desktop from the RetroPie option and it's working. The only strange thing was the update notification to install sdl2 2.26. I choose it but nothing happen.

zaphod24

@zaphod24

Is anyone else having any odd USB issues with their pi5?

abj

@zaphod24 The only issue i have so far, is that the system can't boot from a certain usb card reader i have. The same device, is working with older Pi models.

Darksavior

@zaphod24 My pi5 will sometimes not detect my wired 8bitdo controller unless I re-insert it but I haven't tried it lately to see if a firmware update fixed it. I boot RetroPie from a usb stick and my roms are on second usb stick. Those work fine.

zaphod24

@Darksavior do you have one or two controllers? I have two and the second one doesn't detect/work and the first is hit and miss whether it detects or not.. If it does not, it usually will the next reboot or power cycle.

retropieuser555

Anyone with a 8GB fancy a challenge and attempting the Ocarina of Time PC Port:-

https://github.com/HarbourMasters/Shipwright/issues/3870

I got right to the end and ran out of memory when compiling as I have a 4GB rather than 8GB Pi 5

mitu

@retropieuser555 said in Raspberry Pi 5 - official announcement:

I got right to the end and ran out of memory when compiling as I have a 4GB rather than 8GB Pi 5

Add more swap ?

hawkes_84

@retropieuser555 I don't have the know how for such a task but do let me know when it's done as I'll be all over that :)

retropieuser555

@mitu said in Raspberry Pi 5 - official announcement:

@retropieuser555 said in Raspberry Pi 5 - official announcement:

I got right to the end and ran out of memory when compiling as I have a 4GB rather than 8GB Pi 5

Add more swap ?

Perfect, that did the job (https://retropie.org.uk/forum/topic/35182/guide-how-to-add-ocarina-of-time-pc-port-to-retropie-pi5-64bit for help).

I just followed Ship of Harkinain's Linux build instructions and followed a guide to change the swap memory from 100mb to 1024mb.

Haven't tried mod packs yet but 60 FPS works very nicely. Also there's no way to exit without using a mouse and keyboard yet, I might add a check in the guide+start SDL buttons so we can quit out, seeing as the PC Port is designed with desktops in mind

Darksavior

This post is deleted!

Darksavior

@zaphod24 said in Raspberry Pi 5 - official announcement:

@Darksavior do you have one or two controllers? I have two and the second one doesn't detect/work and the first is hit and miss whether it detects or not.. If it does not, it usually will the next reboot or power cycle.

One controller. A reboot or re-connecting the controller fixes it.

zaphod24

@Darksavior Two controllers here.. Having the second attached at boot or after doesn't matter, it's worked maybe one boot out of 50.

abj

I try to reinstall RetroPie to a new sd card but something is failing, that wasn't happen before. Maybe a new Pi OS update break something?

Log File

i follow the following commands and it was possible to correct the issue with the libc-bin package:

sudo rm /var/lib/dpkg/info/libc-bin.*
sudo apt-get clean
sudo apt-get update
sudo apt install libc-bin

abj

I am testing the latest Dolphin standalone. It doesn't run the games (.rvz), It's going back to ES. I had the same issue with the first version of dolphin-rpi5 script.

Log:

Parameters: 
Executing: xinit /dev/shm/retropie_xinitrc -- vt1 -keeptty


X.Org X Server 1.21.1.7
X Protocol Version 11, Revision 0
Current Operating System: Linux retropie 6.1.0-rpi8-rpi-v8 #1 SMP PREEMPT Debian 1:6.1.73-1+rpt1 (2024-01-25) aarch64
Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=D8:3A:DD:94:75:FD vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=ttyAMA10,115200 console=tty1 root=PARTUUID=adb73ae1-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=GR
xorg-server 2:21.1.7-3+rpt2+deb12u5 (https://www.debian.org/support) 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/home/pi/.local/share/xorg/Xorg.0.log", Time: Sat Feb 17 09:38:45 2024
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) 
Fatal server error:
(EE) Cannot run in framebuffer mode. Please specify busIDs        for all framebuffer devices
(EE) 
(EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
(EE) Please also check the log file at "/home/pi/.local/share/xorg/Xorg.0.log" for additional information.
(EE) 
(EE) Server terminated with error (1). Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error