Scrolling game title using 16x2 CLCD on RAS Console-Pi

fly9p

It's a special RAS Console-Pi!!

it's awesome in real....

zzeromin

@fly9p Thank you. I appreciate it.

noremaC1337

I am curious how you did the on/off. I see your switch, and it appears you have some type of custom plug into the power of the RPi, and then the switch is also wired to a plug (looks like barrel adapter) on the back of the unit. Does this switch shut down your RPi appropriately? Or do you still go through the menu to shut it down properly, and the switch is basically just there for turning the unit back on?

zzeromin

@noremaC1337 The power switch used by turn on/off only. I'm using shutdown command or menu when RPi turn off nomally.
Please see below power part of the RAS Console-Pi circuit.

noremaC1337

@zzeromin So are you saying that when everything is on, you can go up and press the power button again, and it will run the shut down script?

The way that I see it, based on your diagram, is that once everything is turned on, the power is now flowing from the DC jack through the switch to the board. So if you were to go up, and press the button again (essentially "un locking" it), this would abruptly cut the power to the board and wouldn't even give it a chance to run any scripts. Let me know if this is correct thinking.

I have a Raspberry Pi 2 Model b. There are two holes right next to the display out that are labeled "RUN". I have soldered a two pin header to those holes, and now when I briefly touch them together when the board is not booted up, it will start everything up. I am thinking that essentially it would be the same thing as this?

zzeromin

@noremaC1337 I never use any shutdown script when RPi shutdown. Please see the process of RPi power switch.

Push the switch button. -> Turn on RAS Console-Pi
If I want to shutdown, I will use shutdown command using SSH for myself or shutdown menu in RetroPie. -> sudo shutdown -h now
and then push the button again.-> Turn off RAS Console-Pi power

If you want to make shutdown script, plz see the below link.

reference: http://www.instructables.com/id/Simple-Raspberry-Pi-Shutdown-Button/

As you said before RUN is RESETfunction.
If you connect the two pins of RUN with a piece of wire, the RPi will reset.

reference: https://blog.adafruit.com/2014/10/10/making-a-reset-switch-for-your-raspberry-pi-model-b-run-pads-piday-raspberrypi-raspberry_pi/

Nismo

@zzeromin Amazing job! looks beautiful.

zzeromin

@Nismo Thanks a lot. You can see more photos of RAS Console-Pi.

flickr link: https://flic.kr/s/aHskLvKoCZ

evlthecat

@zzeromin Thanks for posting this project. I used your idea to create a client/server in ANSI C. I can monitor multiple consoles around the house. I am looking for some place to host the project. I give proper credit to you and others in code.

zzeromin

@evlthecat That is a good news. I'm looking forward to your good project. Thanks.

bbuschke

I have followed the steps on this and i have power to the clcd but i have nothing showing on the screen when i enter a game.

zzeromin

@bbuschke Did you install 'Scraper'? and What is your I2C address?
plz check your I2C address using this command.
sudo i2cdetect -y 1

primy

Fantastic the result, my congratulations. A question, where is it possible to locate the plans of the box?

Advokaten

@zzeromin this looks amazing! I have a question though, would it be possible to use a 'real' led sign with the text scrolling on it?
My idea is to have one of those LED scrolling text displays, that you see in public, on the front of my arcade cabinet, and I thought it might be cool to have it be interactive with retropie itself, somehow... :) I have no idea how though.

Like on one of these.

alt text

Boz

Hi, is it possible to have both a power button and the lcd display sharing gpio pins? (pins 5 and 6)

ortsac

@zzeromin Cool and Classy Console. Is that a custom made case? Where can I order one? I'd like to build one as part of my Home Theater setup.

mc9625

@zzeromin said in Scrolling game title using 16x2 CLCD on RAS Console-Pi:

https://github.com/zzeromin/RetroPie-Clcd

Hi, I know it's quite an old discussion, but I wonder if your script could be used as a starting point to create a dynamic marquee. Instead of simple write the rom name on an LCD, show a related image on a GPIO smaller screen (dev/fb0) . They are quite cheap today and could be fun to have a smaller service monitor. Do you think it could be hacked to achieve this? (I know nothing about Python...)

Sashby

@mc9625 Here is an example of what you're after. You just need to make a runcommand script to display an image of the current running game.

https://github.com/RetroPie/RetroPie-Setup/wiki/Runcommand#runcommand-onstart-and-runcommand-onend-scripts

https://retropie.org.uk/forum/topic/12230/romtastick-mkii-3d-printed-console-with-mini-lcd-display/
(Note also that the software running the LCD panel with buttons is available on GitHub and is reusable for your own projects.)

mc9625

@sashby Thanks, that is exactly what I was looking for. I knew it could have been done via run command scripts, and I've been able to do it "manually", but I didn't knew how to retrieve specific game info. Romtastick is perfect, although I have a different LCD panel, let's see if I will be able to tweak it to make it work. Thanks

stephenrose2006

@zzeromin i have got this installed and it is displaying devices IP address, date, CPU info. but when i load a rom up it just shows None. i have scraped and have a gamelist.xml file. any ideas?