SHANWAN / PS3 CONTROLLER Pi3 RETROPIE 3.6 BLUETOOTH SETUP

luetzel

@Wolfman100 said in SHANWAN / PS3 CONTROLLER Pi3 RETROPIE 3.6 BLUETOOTH SETUP:

@luetzel

I was downloading the patches by right-click 'save link address' and pasting it after wget

Ah ok, that's why it didn't work for you. Make sure that your link has a 'raw' in front, when downloading with wget:

https://raw.githubusercontent.com/luetzel/bluez/master/patch/bluez-01_add-obexd-policy.patch

Wolfman100

@luetzel Thanks again.Will try again

Wolfman100

@luetzel Shall I download from your github?

luetzel

@Wolfman100

@Wolfman100 said in SHANWAN / PS3 CONTROLLER Pi3 RETROPIE 3.6 BLUETOOTH SETUP:

@luetzel Shall I download from your github?

Well thats up to you, at least it would simplify the procedure to a:

git clone https://github.com/luetzel/bluez
cd bluez
./configure --prefix=/usr --mandir=/usr/share/man --sysconfdir=/etc --localstatedir=/var --enable-sixaxis
make -j3
sudo make install

Note, that you probably have to do 'sudo apt-get install git' first.

Wolfman100

@luetzel said in SHANWAN / PS3 CONTROLLER Pi3 RETROPIE 3.6 BLUETOOTH SETUP:

sudo make install

Ha..well that seems a lot easier!So I'm presuming this is with all the patches already applied?

Wolfman100

This is now what I get when I run sixpair:

root@osmc:/# sudo sixpair
Current Bluetooth master: ff:00:03:c6:9e:66
Unable to retrieve local bd_addr from hcitool dev.
Please enable Bluetooth or specify an address manually.

luetzel

@Wolfman100
yes they are already included.

Wolfman100

@luetzel This is what I get as my bluetooth service output,which now indicates the correct version 5.39:

● bluetooth.service - Bluetooth service
Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled)
Drop-In: /etc/systemd/system/bluetooth.service.d
└─local.conf
Active: active (running) since Tue 2016-05-17 13:56:43 BST; 36min ago
Docs: man:bluetoothd(8)
Main PID: 629 (bluetoothd)
Status: "Running"
CGroup: /system.slice/bluetooth.service
└─629 /usr/libexec/bluetooth/bluetoothd

May 17 13:56:43 osmc bluetoothd[629]: Bluetooth daemon 5.39
May 17 13:56:43 osmc bluetoothd[629]: Starting SDP server
May 17 13:56:43 osmc bluetoothd[629]: Bluetooth management interface 1.10 i...ed

Warning: Unit file changed on disk, 'systemctl daemon-reload' recommended.
Hint: Some lines were ellipsized, use -l to sh
w in full.

luetzel

@Wolfman100 said in SHANWAN / PS3 CONTROLLER Pi3 RETROPIE 3.6 BLUETOOTH SETUP:

This is now what I get when I run sixpair:

root@osmc:/# sudo sixpair
Current Bluetooth master: ff:00:03:c6:9e:66
Unable to retrieve local bd_addr from hcitool dev.
Please enable Bluetooth or specify an address manually.

When you tried sixpair before, it seemed to work:

I have now installed QtSixA and have run Sixpair:
root@osmc:/# sudo ./sixpair
Current Bluetooth master: b8:27:eb:a1:9b:7f
Setting master bd_addr to b8:27:eb:a1:9b:7f

I don't understand what's going on ..

Wolfman100

@luetzel

● bluetooth.service - Bluetooth service
Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled)
Drop-In: /etc/systemd/system/bluetooth.service.d
└─local.conf
Active: inactive (dead)
Docs: man:bluetoothd(8)

Warning: Unit file changed on disk, 'systemctl daemon-reload' recommended.

luetzel

@Wolfman100

@Wolfman100 said in SHANWAN / PS3 CONTROLLER Pi3 RETROPIE 3.6 BLUETOOTH SETUP:

@luetzel

● bluetooth.service - Bluetooth service
Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled)
Drop-In: /etc/systemd/system/bluetooth.service.d
└─local.conf
Active: inactive (dead)
Docs: man:bluetoothd(8)

Warning: Unit file changed on disk, 'systemctl daemon-reload' recommended.

And why it is no running anymore? Try
sudo systemctl daemon-reload
sudo service bluetooth restart

and lets see if it helps.

Wolfman100

@luetzel OK cool....that seems to have got bluetooth running again!

Wolfman100

@luetzel sixpair and bluetoothctl don't seem to be seeing the bluetooth controller now however:

root@osmc:/# sudo sixpair
Current Bluetooth master: ff:00:03:c6:9e:66
Unable to retrieve local bd_addr from hcitool dev.
Please enable Bluetooth or specify an address manually.
root@osmc:/# b;uetoothctl
bash: b: command not found
bash: uetoothctl: command not found
root@osmc:/# bluetoothctl
[bluetooth]# devices
[bluetooth]# scan on
No default controller available
[bluetooth]#

luetzel

@Wolfman100

@Wolfman100 said in SHANWAN / PS3 CONTROLLER Pi3 RETROPIE 3.6 BLUETOOTH SETUP:

@luetzel sixpair and bluetoothctl don't seem to be seeing the bluetooth controller now however:

No default controller available
[bluetooth]#

did you try:
hcitool dev

here it shows:
Devices:
hci0 00:1B:10:00:2A:EC

which is the hardware address of my BT dongle. Perhaps you have to unplug/replug it to be recognized.
IMHO the linux kernel should be responsible to register hci0, not bluez. Perhaps you have to shutdown/power off
and reboot your pi.

Wolfman100

@luetzel to confirm it is active:

● bluetooth.service - Bluetooth service
Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled)
Drop-In: /etc/systemd/system/bluetooth.service.d
└─local.conf
Active: active (running) since Tue 2016-05-17 14:51:59 BST; 11min ago
Docs: man:bluetoothd(8)
Main PID: 842 (bluetoothd)
Status: "Running"
CGroup: /system.slice/bluetooth.service
└─842 /usr/libexec/bluetooth/bluetoothd

May 17 14:51:59 osmc bluetoothd[842]: Bluetooth daemon 5.39
May 17 14:51:59 osmc bluetoothd[842]: Starting SDP server
May 17 14:51:59 osmc bluetoothd[842]: Bluetooth management interface 1.10 i...ed
Hint: Some lines were ellipsized, use -l to show in full.

Wolfman100

@luetzel

My BT dongle is built in,it is a Pi3.

Wolfman100

@luetzel said in SHANWAN / PS3 CONTROLLER Pi3 RETROPIE 3.6 BLUETOOTH SETUP:

hcitool dev

hcitool shows no devices!

root@osmc:/# hcitool dev
Devices:

luetzel

@Wolfman100 said in SHANWAN / PS3 CONTROLLER Pi3 RETROPIE 3.6 BLUETOOTH SETUP:

@luetzel said in SHANWAN / PS3 CONTROLLER Pi3 RETROPIE 3.6 BLUETOOTH SETUP:

hcitool dev

hcitool shows no devices!

root@osmc:/# hcitool dev
Devices:

@Wolfman100 said in SHANWAN / PS3 CONTROLLER Pi3 RETROPIE 3.6 BLUETOOTH SETUP:

@luetzel

My BT dongle is built in,it is a Pi3.

Ah, I see. This might be the problem. I have seen another thread in this forum that there is some trouble with the BT device on Pi3.
https://retropie.org.uk/forum/topic/842/pi-3-ps3-bluetooth-controller-freeze-fix-updated/1

What distribution are you using on your Pi3? Was it osmc? My RetroPie runs on Rasbian/Pi2.

Just give me a minute, I'll try to replicate this behaviour on my Pi3 with osmc.

Wolfman100

@luetzel thank you so much for your dedication to solving this.Your a true gent!

It seems that I mistakenly just presumed your whole article was about Pi3 as a lot of people seem to be having issues with this!

luetzel

@Wolfman100 said in SHANWAN / PS3 CONTROLLER Pi3 RETROPIE 3.6 BLUETOOTH SETUP:

@luetzel thank you so much for your dedication to solving this.Your a true gent!

It seems that I mistakenly just presumed your whole article was about Pi3 as a lot of people seem to be having issues with this!

But it is not related to the Pi version. So far only genuine Sony PS3 controllers were supported by bluez. The cloned controllers are supported by the sixad daemon, but it interferes with other BT devices, such as keyboards or mice. I would be happy to see support PS3 support via bluez in the next version of RetroPie. Thats why I'm interested in your problem. It is so annoying, that PS3 isn't properly supported by bluez ...