Maldita Castilla joypad support

mediamogul

This is purely hypothetical, but you might be able to map the virtual XBox 360 event by changing all the ABS_ and BTN_ references to KEY_, such as:

 --evdev-absmap KEY_*=x1,KEY_*=y1 \
 --evdev-keymap KEY_*=a,KEY_*=b \

If that doesn't work then I believe you'll have to try and find mapping software that can specifically map keyboard keys to event types. One of the two other options I listed above may be capable of that, but I can't say for sure.

retronerd

can you use an 8bitdo snes30 controller and start it in keyboard mode?

mediamogul

@retronerd

I'm afraid not. Since then I've learned that while this feature is on the drawing board and has even been coded, it currently isn't implemented and there has been no development in over a year.

pjft

@hiulit hi. Did you end up sitting this out? I'm going through the exact same process with xboxdrv on another thread with @mediamogul but seem to have hit a similar roadblock.

Would love to hear your progress and status.

Thanks.

hiulit

@pjft Not on my part, I haven't been successful :(

ExarKunIv

so here is what i have found out. Maldita Castilla will not play unless it sees the controller input with a input0

i had to remove all my settings and IR input to even get it to work.

I dont know if @mediamogul knows how to get xboxdrv to set the keyboard map to input0

for me my IR input takes that spot. so this game will not work for me.

maybe there is a way to reserve that placement for different input. that is beyond me

as you see my HID it taking the input0 and this is what Maldita Castilla looks for its input. so we need to reserve this input from being taken and set it for a keyboard map.

I know this is not a answer but more info never hurts.

I: Bus=0003 Vendor=1d57 Product=ad02 Version=0110
N: Name="HID 1d57:ad02"
P: Phys=usb-3f980000.usb-1.4/input0
S: Sysfs=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:1D57:AD02.0001/input/input0
U: Uniq=
H: Handlers=sysrq kbd leds event0
B: PROP=0
B: EV=12001f
B: KEY=3007f 0 0 0 0 483ffff 17aff32d bf544446 0 0 1 130c13 b17c007 ffa67bfa d941dfff febeffdf f3cfffff ffffffff fffffffe
B: REL=40
B: ABS=1 0
B: MSC=10
B: LED=7

```

backstander

@ExarKunIv
Does your joystick/gamepad use this IR input?

If not try plugging in your joystick/gamepad into USB port 1 on your RPi

pjft

Oh, wow. This is definitely a great find.

I am unsure of how exactly we'll be able to systematically fix this, but knowing about this can already help narrowing down approaches to make it work.

If you start your OS with just a keyboard plugged in, and then plug in your controller, and then unplug the keyboard, will input0 be free? If you run xboxdrv from SSH, will it create a virtual pad on input0?

ExarKunIv

@backstander

i have a 8bitdo. so sadly this will not work for me
and i use the IR for KODI and it is connect to USB 3

ExarKunIv

I: Bus=0003 Vendor=1d57 Product=ad02 Version=0110
N: Name="HID 1d57:ad02"
P: Phys=usb-3f980000.usb-1.4/input0
S: Sysfs=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:1D57:AD02.0001/input/input0
U: Uniq=
H: Handlers=sysrq kbd leds event0
B: PROP=0
B: EV=12001f
B: KEY=3007f 0 0 0 0 483ffff 17aff32d bf544446 0 0 1 130c13 b17c007 ffa67bfa d941dfff febeffdf f3cfffff ffffffff fffffffe
B: REL=40
B: ABS=1 0
B: MSC=10
B: LED=7

I: Bus=0003 Vendor=1d57 Product=ad02 Version=0110
N: Name="HID 1d57:ad02"
P: Phys=usb-3f980000.usb-1.4/input1
S: Sysfs=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:1D57:AD02.0002/input/input1
U: Uniq=
H: Handlers=mouse0 event1
B: PROP=0
B: EV=17
B: KEY=1f0000 0 0 0 0 0 0 0 0
B: REL=103
B: MSC=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="Xbox Gamepad (userspace driver)"
P: Phys=
S: Sysfs=/devices/virtual/input/input2
U: Uniq=
H: Handlers=js0 event2
B: PROP=0
B: EV=b
B: KEY=7fdb0000 0 0 0 0 0 0 0 0 0
B: ABS=3001b

I: Bus=0005 Vendor=3810 Product=0009 Version=0100
N: Name="8Bitdo FC30 Pro"
P: Phys=b8:27:eb:47:c7:78
S: Sysfs=/devices/platform/soc/3f201000.uart/tty/ttyAMA0/hci0/hci0:11/0005:3810:0009.0003/input/input3
U: Uniq=e4:17:d8:7a:6a:7d
H: Handlers=js1 event3
B: PROP=0
B: EV=1b
B: KEY=ffff0000 0 0 0 0 0 0 0 0 0
B: ABS=30627
B: MSC=10

here is my inputs. and i know to fix the problem all i have to do it disconnect the HID, but i have it hardwired to my Pie so it is a little hard and defeats the point.

hiulit

I'm using arcade buttons via GPIO using Adafruit's Retrograme, a GPIO-to-virtual-keyboard utility, so essentially I have two keyboards connected to the Raspberry Pi.

The keyboard connected to the USB is always input0.
And the virtual keyboard is input1. So Maldita Castilla will never work with this one :(

Is there an 'easy' way (or any kind of way :P) to change input0 for input1?

Also, if I connect the keyboard to the USB no. 2 (as shown in the image above) and I have an 8Bitdo via bluetooth, will the 8Bitdo be input0 or will it be the keyboard?

hiulit

Ok, when I launch Maldita Castilla via terminal, I see this code:

GAMEPAD: 4 axis values (last) at 0x76289660
GAMEPAD: Enumerating 5
GAMEPAD: device name 8Bitdo NES30 GamePad
GAMEPAD: buttons - 16, axes - 8
GAMEPAD: 4 axis values (last) at 0x76289620
GAMEPAD: 4 axis values (last) at 0x76289600
GAMEPAD: 4 axis values (last) at 0x762895e0

So, it recognizes the gamepad, right? Shouldn't it be working then? :(

ExarKunIv

@hiulit

one would think, but as of yet no one knows. personally unless someone goes in to the code and changes something to have the game look for other inputs i don't think it will work for anyone who has more then one thing connected to the pi. or is using xboxdrv.

i hope, but im not holding my breath

hiulit

@ExarKunIv But I tried it with no keyboard, only the gamepad, and still, nothing :(
Would it be possible to change js0(or any other input) into input0 so Maldita Castilla can see it?

ExarKunIv

@hiulit

not that i know of.

what input is your conroller?

hiulit

@ExarKunIv I'm telling you this off the top of my head but I think i have:

input0 - don't know what it is
input1 - keyboard
js0- controller

And when I have the GPIO buttons as a virtual keyboard I think they are input2.

I'll tell you more specifically when I get home ;)

hiulit

This is what I get when I enter cat /proc/bus/input/devices.
I only have a usb keyboard and a bluetooth 8Bitdo gamepad.

What is input0?

I: Bus=0003 Vendor=04f3 Product=0103 Version=0111
N: Name="HID 04f3:0103"
P: Phys=usb-3f980000.usb-1.5/input0
S: Sysfs=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:04F3:0103.0001/input/input0
U: Uniq=
H: Handlers=sysrq kbd leds event0 
B: PROP=0
B: EV=120013
B: KEY=10000 7 ff800000 7ff febeffdf f3cfffff ffffffff fffffffe
B: MSC=10
B: LED=7

I: Bus=0003 Vendor=04f3 Product=0103 Version=0111
N: Name="HID 04f3:0103"
P: Phys=usb-3f980000.usb-1.5/input1
S: Sysfs=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:04F3:0103.0002/input/input1
U: Uniq=
H: Handlers=kbd event1 
B: PROP=0
B: EV=1f
B: KEY=3007f 0 0 0 0 483ffff 17aff32d bf544446 0 0 1 130c13 b17c000 267bfa d941dfed 9e1680 4400 0 10000002
B: REL=40
B: ABS=1 0
B: MSC=10

I: Bus=0005 Vendor=2820 Product=0009 Version=0100
N: Name="8Bitdo NES30 GamePad"
P: Phys=b8:27:eb:19:f7:5e
S: Sysfs=/devices/platform/soc/3f201000.uart/tty/ttyAMA0/hci0/hci0:12/0005:2820:0009.0003/input/input2
U: Uniq=e4:17:d8:58:75:60
H: Handlers=js0 event2 
B: PROP=0
B: EV=1b
B: KEY=ffff0000 0 0 0 0 0 0 0 0 0
B: ABS=30627
B: MSC=10

backstander

@hiulit
Do you have a Logitech K750? I think both input0 and 1 are for the keyboard?

backstander

@hiulit
I can't find anything with Vendor 04f3
http://pcidatabase.com/

What brand keyboard do you have? I might recommend trying a different keyboard and see if that resolves your issues.

hiulit

@backstander I have a "Genius" keyboard, similar to this one https://www.amazon.es/Genius-31300725100-313-Teclado/dp/B018ID3V6U/ref=sr_1_7?ie=UTF8&qid=1491516948&sr=8-7&keywords=teclado+genius

And why would the keyboard need two different input?
Thanks!