Zaxxon audio
-
@sirhenrythe5th I'll fully test it later. I know something is up with my advmame samples anyway. I have 2 directories.
Sampleandsamples, so need to figure that out. Will probably just try one then the other then both just to be sure. -
@stevep for lr-mame2003 samples go here:
/home/pi/RetroPie/BIOS/mame2003/samples/
Provided they are the right samples. They need to be the ones from the older .78 romset, as newer samples are different.AdvMAME samples go wherever the path is pointing in the .rc file. I configured mine to go in the BIOS folder similar to 2003. Of course, these too have to be from the correct romset and are probably different than the ones for mame2003.
Both versions of MAME work though. I have Zaxxon samples working and a bunch of others, like the Galaga explosion and Marios footsteps.
-
Regarding advmame.....How do I edit the config file in retropie so to as to check the paths pointing to the correct folders?
-
@stevep open the terminal, point to the path of the config-file and open it with the "sudo nano" command.
After you finished the editing of paths etc press Ctrl + x to leave the editor.
You then will also be asked if you want to save the changes. -
Regarding advmame
Still can't get it to work.other games like Donkey Kong use samples as well. I'm using my pc to edit the .rc files through my home network. Can anyone give me the command line I need to let the emulator see the samples? Also ..I'm putting the roms in the rom folder. Is that correct because the emus that come with retropi don't seem to have a rom directory. Sorry...still trying to wrap my brain aroun this.... -
@stevep Assuming you have installed advmame (which you can do via the RetroPie configuration screens if you need to), you should have a directory for roms for this emulator:
/home/pi/RetroPie/roms/mame-advmameYou need to put your advmame roms in that directory, restart Emulation Station and you should be able to launch them from a MAME system that appears. I don't know which version of Advmame is the default, but you can pick that using the runcommand feature at launch. For the sake of argument, let's say you are using Advmame 1.4.
So, make sure your roms are from a .106 romset. but crucially, that your samples are ALSO for this set. Samples are not universal. They have evolved, so you need to use the right version of samples for the romset.
Next, open the .rc file. Again, for the sake of argument, for advmame1.4:
/opt/retropie/configs/mame-advancemame/advmame-1.4.rcLook for the following line:
sound_samples yes
Make sure this saysyesThen, look for:
dir_sample SAMPLEDIRECTORYPATHWherever that SAMPLEDIRECTORYPATH setting is pointed, that is where you must place your sample files. Each sample should be a zip file that corresponds to the name of the ROM for which is used.
Save the .rc file, launch your game (again, using advmame1.4 in our example) and you should have samples working.
If you don't:
- You put samples in the wrong location. See above.
- Your sample is the wrong format/wrong ROMset version.
- You don't have samples enabled. See above.
- Something isn't named properly (wrong directory name in your path, like 'samples' when maybe it should be 'sample', or the zip name doesn't match.
Verify all of this detail, and if it still fails, describe EXACTLY what you are doing, where things are located, what your config looks like, what version of advmame you are using, what your rom files are called, your sample file, and we should be able to get it figured out.
Most of the trouble I have had with this was because of two things: Either my samples were the wrong versions, or I had them in the wrong folder.
-
@caver01 Yeah, cheers mate, just getting a chance to look at this again. Samples are now working for Zaxxon & Jackson (bootleg) in advMame 3.4. Still can't get any sound out of libretro 2003 but that's good enough for me. Thanks again.
-
@AlexMurphy I have samples working in both. If you want to compare folders and/or file sizes, let me know.
-
@caver01 Thanks for the offer. I have this
710 KB (727,146 bytes)and there are 12.wavfiles inside. It's named correctlyzaxxon.zipand it's in...BIOS/mame2003/samples/It's from the 0.78 set. Samples is set toONCan't figure out the issue at all. -
@AlexMurphy Ok I will check my setup when I get home in a bit.
-
zaxxon.zip:
727,146 bytes2048 -rwxrwxrwx 1 randy staff 30014 Dec 24 1996 00.wav 2048 -rwxrwxrwx 1 randy staff 17842 Dec 24 1996 01.wav 2048 -rwxrwxrwx 1 randy staff 63640 Dec 24 1996 02.wav 2048 -rwxrwxrwx 1 randy staff 40464 Dec 24 1996 03.wav 2048 -rwxrwxrwx 1 randy staff 66338 Dec 24 1996 04.wav 2048 -rwxrwxrwx 1 randy staff 56082 Dec 24 1996 05.wav 2048 -rwxrwxrwx 1 randy staff 104736 Dec 24 1996 08.wav 2048 -rwxrwxrwx 1 randy staff 169014 Dec 24 1996 10.wav 2048 -rwxrwxrwx 1 randy staff 154188 Dec 24 1996 11.wav 2048 -rwxrwxrwx 1 randy staff 4172 Dec 24 1996 20.wav 2048 -rwxrwxrwx 1 randy staff 6898 Dec 24 1996 21.wav 2048 -rwxrwxrwx 1 randy staff 87022 Dec 24 1996 23.wavWe definitely have different samples,<edit> I don't know why I thought they were different! </edit> I wonder if the ones in the set are correct. What I am showing you here works. I just tested, and I have audio. Perhaps these are from an older set? Worth trying I guess. -
@caver01 Thanks, no they are the same
.wavfiles.zaxxon.zipis the exact same size. It's a head scratcher but no massive deal as I said it runs perfectly on advmame and that's good enough for me. Cheers for the help. -
repacking the zip archive might help in this case
-
Weird. I don't know why I thought the numbers were different!
What about updated binaries? I know the sample path changed, but that was a while ago.
-
@caver01 I'm all up to date. Thanks again, don't worry about it. No big deal as advMame runs it perfectly. You seem to be fretting over this more than I ever did!
-
@caver01 Here is some screenshots of advmame setup:
-
@stevep Create a file called samples or re-name the one you have called "sample" or change the file path in the config to point to the correct directory.
EDIT: I see it is . But try changing every thing to "samples" mine works like that.
-
@stevep Which advMame are you using? Just asking. There are 3.
-
I have all 3 but I'm currently working with 1.4
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.