PSX pad via USB adapter problems

mediamogul

The combinations are probably because it's on a rocker. Were you not able to invoke a fourth number at all? Perhaps 15?

bobchiba

@mediamogul no it seems that just those 3 change state. For example left dpad triggers 16 ON and right dpad triggers 16 + 18 ON. Another example is up dapd triggers 16+17+18 ON.

RetroResolution

Is your playstation pad a dualshock (or equivalent)? If so, the 'analog' button changes which values the d-pad outputs (either as buttons or as axis values).

I wrote about this in a blog post:
PlayStation Emulation on the Pi: Enhancing the Experience with the Options Menu – Part Three: Analogue Controllers

mediamogul

@RetroResolution

That's a really great site you have there. It's like Christmas over there with all the fantastic articles. The format is very stylish as well.

RetroResolution

@mediamogul thanks! Really great to hear such positive feedback - I really appreciate it.

bobchiba

@RetroResolution my pad is the original so no analogue sticks

RetroResolution

@bobchiba Ah, righto. It was worth checking though.

mediamogul

@bobchiba

What's the name of the adapter and it's manufacturer?

bobchiba

@mediamogul Generic PS1 PS2 to PC USB 2.0 Controller Adapter Converter Compatible for Sony PS2 Wired Controller https://www.amazon.co.uk/dp/B00FBM3JEG/ref=cm_sw_r_other_apa_kCZuxbHCB501W

mediamogul

@bobchiba

There are many times where drivers are unnecessary for a device like this as some other piece of software can be used to pick up the slack. However, I don't know what to make of the input coming from that DPad. In all the mapping software I've ever used, I wouldn't know how to translate three button inputs, mixing in various combinations into the proper four needed for direction. I'm afraid this might be the rare occurrence where using the proprietary drivers is inescapable. I'm guessing the included driver DVD it talks about in the description is only for Windows-based systems?

mediamogul

@bobchiba

On fourth thought, I think I might know how to map those combinations after all. Run jstest again and tell me what combinations are occurring. So far we know that 16=Left, 16+18=Right and 16+17+18=Up. Find out what combo equals down and also double check the previous combos while you're there.

Edit: Also, go ahead and give me the code numbers for all the other buttons as well to save time.

mediamogul

@bobchiba

I just did a trial run using one of my own controllers and it only showed results using event codes rather than js. For those, you'll need to run evtest. What you're looking for there is any listing that starts with "BTN_" after a button is pressed. When a direction is pressed on the DPad, you'll likely see up to three of these. I'll also need to know the event number it's coming from, like "event0" or whatever.