no config found for virtual boy - how/where to load this config?

mediamogul

that was my issue for sure. I downloaded the retropie image, unzipped, but couldn't get it flashed to the SD card, would seem to work and then fail.

As long as you follow these instructions, you should be good. It could have been that your original card was just faulty.

came with no roms at all.

It's actually still illegal to sell the RetroPie image. Also, as you're finding out, it's unwise to trust an unknown entity to pre-configure it.

nitrouscav97

is there a place to check what config retroarch is pulling from? The ES config is correct but where are the configs for retroarch. Does anyone have the text I can copy and paste into wherever it is needed to possibly load the ones for virtual boy?

herb_fargus

@nitrouscav97 Id recommend using etcher to flash the image. Seems to have better results when people struggle with win32diskimager

edmaul69

@herb_fargus i have never had any issues with win32diskimager and it is so easy to use, that i dont understand why so many people have issues with it. Unless they forget to unzip the file.

herb_fargus

@edmaul69 which is why I recommend etcher as decompressing the image is unnecessary. Other issues might be corrupted download/network issues

obsidianspider

@herb_fargus I've also see people have issues with counterfeit SD cards (saying one capacity but actually having substantially less). I only buy my SD cards from "known" sellers like Amazon (sold by Amazon) or a local brick and mortar store (if they're on sale).

herb_fargus

@obsidianspider yes generally unscrupulous eBay sellers can't be trusted to sell quality SD cards or really quality anything for that matter. Pity people continue to be duped

nitrouscav97

is there a place to check what config retroarch is pulling from? The ES config is correct but where are the configs for retroarch. Does anyone have the text I can copy and paste into wherever it is needed to possibly load the ones for virtual boy?

If I know what the config file looks like and where to find it or where I have to go to ad it, or if someone has the text that retroarch reads for virtual boy, I can go and copy and paste it in and then it should ready. Does anyone know where to look so I can see what it's pulling?

mediamogul

@nitrouscav97

We've made our position clear on this and presented you with several options on how to continue without the support of this forum. These are the rules you agreed to when you signed up here. Continuing to disobey them is not a wise move.

nitrouscav97

@mediamogul said in no config found for virtual boy - how/where to load this config?:

@nitrouscav97

We've made our position clear on this and presented you with several options on how to continue without the support of this forum. These are the rules you agreed to when you signed up here. Continuing to disobey them is not a wise move.

No one had answered where you would go to see the retroarch configs. Should be nothing wrong with asking that. If I know what the config looks like and where it is I can edit it.

Basically I'm chastised because I admitted I bought a retropie setup that was sold by someone to me. I also admitted I couldn't get my WinZip to work even following videos. Maybe it's a bad network connection I don't know.

Asking for help on where the retroarch configs are and what to type in shouldn't be a bad question to ask. But I'm sure I'll get banned for my post. Do what you must. I'm new to while retropie thing and help is what I was posting for.

I'll ask again so the forum knows what I wanted to know: where are the retroarch configs and what is the config for the controller to type in for virtual boy? That's my question.

mediamogul

@nitrouscav97

I'm new to while retropie thing and help is what I was posting for.

We've all been sympathetic to that and treated you pleasantly after each support request. We've also patiently explained multiple times that this goes against how we offer support.

nitrouscav97

@mediamogul my apologies. I'll try and see if I can get the SD card erased and flashed with a fresh image. Perhaps that will allow the virtual boy emulator to be installed the easy way instead of manually and will hopefully automatically load and or pull the proper config for it. I was hoping not to have to delete everything and start fresh and just type the config wherever it goes but that doesn't seem to be an option.

herb_fargus

@nitrouscav97 fact of the matter is with any build (especially those from third parties) will fail at some point and a reimage will be necessary. It's much better and cheaper in the long run to know how to set it up yourself.

Let us know how you make out with the image, I would really recommend using etcher as you won't need to unzip the image first before flashing the SD

nitrouscav97

@herb_fargus makes sense. It's too bad it isn't just an easy configuration like when you turn it on and the controller needs to be configured right then and there.

The WinZip program seemed fine but I am working on a new laptop with Windows 10 and after downloading the program and basically going step by step through the video the WinZip program just wouldn't work. It was a couple weeks ago but made an error something like program not supported like it was the laptop with the issue not WinZip itself.

Hopefully tho the new image will automatically load those configs. All the configs work for the other systems this is the only one doing this. I even pondered manually installing lr beetle again to see if it was just the current version that wasn't working.

mediamogul

@nitrouscav97

Hopefully tho the new image will automatically load those configs.

I'm sure it will. I've never heard anyone else experience that issue. Under normal circumstances, VirtualBoy is one of the easiest emulators to setup.

nitrouscav97

@mediamogul The emulator itself wasn't hard to input, its the config that's got me. Something I actually noticed when I tried it again today it is loads and actually says "no config found for virtual bou" it spells boy wrong and says virtual "bou" so that's probably what the issue is! I'm hoping to find where it is getting the "bou" from as that's got to be why it isn't loading the retroarch config for the system. Of course of all the systems it's the one I want to play the most!

nitrouscav97

SOLVED! I figured it out, it was exactly what I thought it was, my own issue and I am a dumbass. Since the config was saying "no config found for virtual bou" I knew there had to be a typo somewhere. I checked the configs the other day and didn't see a typo, BUT it was on the command line of the code that I couldn't see (it is too long) because I couldn't scroll with my controller, I plugged in my keyboard and when I scrolled over on the command line and sure enough I had typed in "virtual bou" since "y" is next to "u" that was my bad. I corrected the letter, restarted ES and boom good to go!

ok for mods/admins to mark this as SOLVED if needed, this was totally my issue! I guess for others with future reference if it says "no config found for <system>" check the command line and SCROLL OVER to see what you typed. I'm truly an idiot!