SHANWAN / PS3 CONTROLLER Pi3 RETROPIE 3.6 BLUETOOTH SETUP
-
@buddhastevend Just to also provide a bit of feedback.
Clean install of 3.8, bluetoothctl gives the following (no more aa:aa story):
pi@retropie:~ $ sudo bluetoothctl [NEW] Controller B8:27:EB:A4:47:F7 retropie [default]bluetoothctl can also see both of my controllers:
[NEW] Device 00:18:01:CA:EB:E8 PLAYSTATION(R)3 Controller [CHG] Device 00:18:01:CA:EB:E8 Class: 0x001f00 [CHG] Device 00:18:01:CA:EB:E8 Connected: yes [CHG] Device 00:18:01:CA:EB:E8 Icon is nil [NEW] Device 00:18:01:CA:FF:D1 PLAYSTATION(R)3 Controller [CHG] Device 00:18:01:CA:FF:D1 Class: 0x001f00 [CHG] Device 00:18:01:CA:FF:D1 Connected: yes [CHG] Device 00:18:01:CA:FF:D1 Icon is nilBut then proceeds to cycle through saying Connected: yes, then no.
The most 'connected' I've managed to get anything to the Pi is with bluetoothctl:
[bluetooth]# info 00:18:01:CA:EB:E8 Device 00:18:01:CA:EB:E8 Name: PLAYSTATION(R)3 Controller Alias: PLAYSTATION(R)3 Controller Class: 0x001f00 Paired: no Trusted: yes Blocked: no Connected: yes LegacyPairing: no Modalias: usb:v054Cp0268d0000Trying to pair returns:
[bluetooth]# pair 00:18:01:CA:EB:E8 Attempting to pair with 00:18:01:CA:EB:E8 Failed to pair: org.bluez.Error.AuthenticationFailedlsusb gives me this:
Bus 001 Device 005: ID 054c:0268 Sony Corp. Batoh Device / PlayStation 3 Controller Bus 001 Device 010: ID 054c:0268 Sony Corp. Batoh Device / PlayStation 3 ControllerWith sixad and sixpair up and running, I get the following read out:
pi@retropie:~ $ sudo sixpair Current Bluetooth master: b8:27:eb:a4:47:f7 Setting master bd_addr to b8:27:eb:a4:47:f7 pi@retropie:~ $ sudo sixad -start [ ok ] Starting bluetooth (via systemctl): bluetooth.service. sixad-bin[5160]: started sixad-bin[5160]: sixad started, press the PS button now Watching... (5s) sixad-bin[5160]: unable to connect to sdp session sixad-bin[5160]: HID create error 107 (Transport endpoint is not connected)I'm at my wit's end. No idea where to go from here.
EDIT: Just as a sanity check I went through the other sixad installs for the clones and I can confirm that Removing PS3 controller configurations and installing the SHANWAN clone support resulted in proper pairing with the internal RPi 3 Bluetooth. This had no effect before.
-
@pablo https://retropie.org.uk/forum/topic/3/read-this-first - Please format your posts - eg using code blocks for easier reading etc
-
@BuZz Apologies
-
Hi @pablo,
the logs you have posted look promising to me, however, I am a bit confused why you're still trying to use 'sixad' to pair your controller? Sixad takes over bluez/ bluetoothd service so that other bluetooth devices, such as keyboards or mice can’t connect while sixad is active.
If this is what you want to achieve, you should stick to the patched bluez, which can handle PS3 controller clones AND
keyboard/mice at the same time, whereas sixad can handle ONLY PS3 controllers.Again, just for clarification: sixad and bluez should not run at the same time. However, if you decided to use the patched bluez, sixpair is still necessary to trust/pair the PS3 controller, since bluetoothctl otherwise asks for a passkey, which cannot be entered with the controller.
-
@luetzel please correct me if I'm wrong, I'm really still learning a lot and I have from you guys. So even with the new retropie 3.8, every time you install ps3 configs from retropie setup it breaks the onboard bluetooth yes? so to install ps3 clone controller I will need to follow your guide to install the patched bluez and sixpair to pair and trust the controller? does the 3.8 update fix the bluetooth and I can only install sixpair to make everything work?
-
@luetzel do you have a little more detailed guide to installing sixad? I'm not very good at working the terminal but I can if I had the detailed instructions. Or could I just ssh and copy the folder (QtSixA) I downloaded to my pc into the pi then run a command from terminal? would that be possible?
-
Hi @Krayzie8
@Krayzie8 said in SHANWAN / PS3 CONTROLLER Pi3 RETROPIE 3.6 BLUETOOTH SETUP:
@luetzel please correct me if I'm wrong, I'm really still learning a lot and I have from you guys. So even with the new retropie 3.8, every time you install ps3 configs from retropie setup it breaks the onboard bluetooth yes?
AFAIK the "Install/Pair PS3 controller" menu option of the retopie-setup.sh installs and configures the sixad daemon.
Sixad takes over the function of "regular" blutetoothd (bluez). You cannot run bluez AND sixad at the same time!The RetroPie PS3 setup doesn't "break" the onboard bluetooth, it just prevents start of the bluez/bluetoothd service, so that pairing of other BT devices than your PS3 controller does not work anymore. So you're in trouble if you don't have a wired mouse or keyboard.
so to install ps3 clone controller I will need to follow your guide to install the patched bluez and sixpair to pair and trust the controller?
In case that you have a Gasia/Shanwan clone, pairing should be possible using the Gasia/Shanwan menu option of the retopie-setup.sh. AFAIK it is possible to pair "genuine" Sony controllers using bluez with the sixaxis plugin. If you own this kind of controller, RetroPie is supposed to work out-of-the-box. Check the output of 'dmesg' while connecting your controller via USB to figure out which type of controller you have.
If you want to use other BT devices AND your controller clones at the same time, you should skip installation through retopie-setup.sh script and use the patched bluez version instead. These patches enable bluez to pair Gasia/Shanwan controller clones using the bluez sixaxis plugin.
does the 3.8 update fix the bluetooth and I can only install sixpair to make everything work?
If you run retopie-setup.sh on Raspbian it will do an apt-get update && apt-get upgrade in order to update all packages on your system. This will probably fix the problems that have been recently reported with the build-in bluetooth hardware on a Pi3. There are a couple of threads in this forum dealing with the broken build-in BT on Pi3.
Depending whether you want to use other BT devices you have to install either sixad/sixpair or patched bluez/sixpair.
-
@luetzel do you have a little more detailed guide to installing sixad? I'm not very good at working the terminal but I can if I had the detailed instructions. Or could I just ssh and copy the folder (QtSixA) I downloaded to my pc into the pi then run a command from terminal? would that be possible?
@Krayzie8
Detailled installation instructions can be found within the INSTALL file of the qtsixa-1.4.96.tar.gz archive found at https://sourceforge.net/projects/qtsixa/ -
@luetzel Thanks very much! Really appreciate it. My PS3 controller is not genuine. Not sure if it's Shanwan or Gasia but it shows as SZMY-Power Playstation Controller. I will attempting to install the patched bluez since I want my controller and other devices to use bluetooth. I'm looking at the instructions now within the install file of the qtsixa and will google some more on how to install the sixpair. Haven't done a "build" before but I will try my best. Wish me luck. Thanks
-
@luetzel Your invalueable input seems to be helping a lot of people out so must be commended.: )
I am doing yet another install and this time when configuring Bluez I am getting the following error:
configure: error: readline header files are required
Any idea what this could be?
-
or anyone else?
-
I'm not sure why this issue has arisen as it has not happened on previous installs.The variables that have changed are the build is on a single OS system (Just OSMC,not a Raspian/OSMC dual boot) and a lter version of RetroPie 4.0.I can't imagine that either of these have contributed to the issue however?
-
@Wolfman100
Hi Wolfman,
sorry for my delayed answer, but I do not receive email notifications from the forum. You are missing (again) some packages, which are required for compilation of the source code. In general: if you receive a message such as 'missing header(file).h' from ./configure or gcc compiler, simply do a 'sudo aptitude search <name>'. In case of 'readline', aptitude reveals a package named 'readline-dev'. Just install it and you are good to go. -
Hi @luetzel AKA The Master Of the Shanwan!
No problem.Thanks for getting back to me.I'm kind of intigued as to why this time around that particular package is missing.
I already went to:
https://cnswww.cns.cwru.edu/php/chet/readline/rltop.html
And attempted to install that package but that then returned more errors so I stopped as I didn't have to install any of this before....
-
Surely in my previous installions which were dual boot,there was no way that it would be seeing installed packages on another OS and using those is there?
-
I have also tried:
sudo apt-get install readline-dev
and it is unable to locate package
-
I managed to install the correct package which solved the issue with:
sudo apt-get install libreadline-gplv2-dev
-
For some reason though the 'make' fails:
osmc@osmc:~/qtsixa-1.4.96/utils$ ls
bins hcid hidraw-dump.c Makefile sixad-jack.c sixpair.c sixpair_kbd.c
osmc@osmc:~/qtsixa-1.4.96/utils$ nano Makefile
osmc@osmc:~/qtsixa-1.4.96/utils$ make
gcc -Wall -O2 hidraw-dump.c -o bins/hidraw-dump
gcc -Wall -O2 sixad-jack.c -o bins/sixad-jack -ljack -lm
sixad-jack.c:25:23: fatal error: jack/jack.h: No such file or directory
#include <jack/jack.h>
^
compilation terminated.
Makefile:8: recipe for target 'tools' failed
make: *** [tools] Error 1 -
I'm really really baffled why all these errors are appearing and why so many packages seem to not be installed as I had none of these issues on previous builds...
-
Managed to get all the missing packages installed and make QtoSixA,but now the Pi sees the controller,but only as a keyboard for some reason....
[03-C6-9E-66-63-25]# info 03:C6:9E:66:63:25
Device 03:C6:9E:66:63:25
Alias: 03-C6-9E-66-63-25
Class: 0x000540
Icon: input-keyboard
Paired: no
Trusted: no
Blocked: no
Connected: yes
LegacyPairing: no
[CHG] Device 03:C6:9E:66:63:25 Connected: no
[DEL] Device 03:C6:9E:66:63:25 03-C6-9E-66-63-25
[bluetooth]#
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.