White flicker on moving through UI after update to 4.2.3
-
@RedBatman And you definitely updated from source and not the binary?
-
@AlexMurphy yes
-
@RedBatman And you are still seeing this?
-
So I guess I should wait for an official release of retropie?
No I'm not seeing that I'm seeing a white box flicker over the console logos.
-
@RedBatman Okay. What theme are you running?
-
@AlexMurphy Zoid, Carbon, Turnakafan, pretty much any except for the comic book one.
-
@RedBatman Try increasing or decreasing the VRAM in the menu options. I had this and it sorted itself out after I increased the VRAM to 120. Try it from 70 - 130 in increments of 10, You will need to reboot after you change it each time.
-
@AlexMurphy well I set my VRAM to 200 and that seems sort of fixed it, I still get the white box but after I scroll through all of them once after I get out of a game the white box flicker goes away.
-
@RedBatman I wouldn't recommend 200. It may cause stuttering and glitches. Did you try going below 100?, this actually works on some themes too.
-
If you get the white box, you have not updated from source. The issue has been completely removed from ES.
-
@TMNTturtlguy Yeah, it's definitely sorted my end and as I said I updated from source on Sunday. You will know if you have updated from source if you see the black ES splash screen upon loading.
-
Well I did update from source but I not getting the black emulation station screen though, I'm getting the white one.
-
@RedBatman when you push start to enter the menu, what version does it say at the bottom of the screen?
-
2.1.8RP
-
@RedBatman @AlexMurphy I am running the screensaver build right now, what does your say?
-
@TMNTturtlguy Well I'm about to go to bed. Look I Did select update from source, I don't know why it's not black for me, should I try again from command line tommorow?
-
@RedBatman I would update your setup script first, and then reboot and then update Emulationstation from source.
-
@TMNTturtlguy should I update setup script from command line or within retropie setup?
-
@RedBatman you can do the setup script form within retropie
-
Thanks all for stepping in and so valiantly standing up for the new version. I felt a little bit like Batman, sitting in his cave, and hearing that the villain he just imprisoned had escaped and was causing havoc again. :)
That being said, all changes I've done were only to mitigate and manage the textures better - I can't promise that, under some sort of extreme conditions or lower performance devices (maybe on older Pi hardware?) that it will still take too much time to load the textures and as such the white boxes will show.
Still, the fact that the new build has the black loading screen (great catch!) gives me reassurance that, very likely, you're still running the old build I provided.
Indeed, try to update it from source after exiting emulationstation. What causes the slowdown in compiling isn't anything network related but rather lack of memory, as emulationstation in the background will still take quite a bit. So exiting will help with that. The whole process should take about 30 mins or so.
Were you running any particular emulationstation build beforehand other than the stock one?
Let us know how it goes.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.