Macintosh (Basilisk II) 8-bit Color

edmaul69

@mediamogul so do i need to have overscan enabled or not? I get a black screen all the time. More than 50% of the time i try to go into it. I dont have overscan disabled. I have overscan settings set for top, bottom, left and right

mediamogul

@edmaul69 said in Macintosh (Basilisk II) 8-bit Color:

so do i need to have overscan enabled or not? I get a black screen all the time. More than 50% of the time i try to go into it.

I haven't had a chance to test overscan yet, but I think I might know why you're getting a black screen so often. Something that I wasn't really aware of at the time was that in changing the framebuffer's color depth from runcommand-onstart.sh, it creates a race condition to where if jzintv loads at the wrong time, the script could potentially have no effect.

I've only just thought of this due to another runcommand-onstart.sh problem I ran into lately with something else, but it might explain things. I'll test it out on mine, but if this is indeed the case, one solution would be to prevent jzintv from loading for a second or two to give the script time to change the framebuffer. Adding a two second sleep like the launch command below might do the job.

basilisk = "sleep 2; /opt/retropie/emulators/basilisk/bin/BasiliskII --rom /home/pi/RetroPie/roms/macintosh/mac.rom --disk /home/pi/RetroPie/roms/macintosh/disk.img --extfs /home/pi/RetroPie/roms/macintosh --config /opt/retropie/configs/macintosh/basiliskii.cfg"

edmaul69

@mediamogul i get it when baselisk is the only thing loading since boot. I have seperate emulators.cfg settings for two different images. My black and white one which i cant change video settings on but appears to be 256 b&w boots every time but my 256 color one is a pain been trying to boot for the last half hour and not once have i gotten in to that one. Just black screen

edmaul69

@mediamogul ok i added that and it started to boot but then crashed

edmaul69

Of course it boots every time with images not 256 colors.

edmaul69

@mediamogul yeah first time i try 256 with wait it starts loading and when it is going to load the desktop it crashes. Then the program wont work at all until i reboot.

mediamogul

@edmaul69

Have you tried enabling overscan yet. I'm about to.

edmaul69

@mediamogul i have the disable overscan hashtagged out. Is there something else? So even setting it to black and white with dispmanx on it immedietly crashes which it didnt used to do. Thats how i believed i go the 256 colors to work. But yeah even b&w 256 crashes

edmaul69

@mediamogul the way this is acting now is like dispmanx doesn’t work at all

mediamogul

@edmaul69

I read and reread @Meneer-Jansen's workaround here and it seems he believes it all boils down to leaving #disable_overscan=1 commented out. Mine's uncommented, but was set to disable_overscan=0. I've restored it back to it's default and am rebooting now.

mediamogul

Black screen and a crash. Now I'm going to try it with the framebuffer at 8-bit. After that, I'm going to try disabling dispmanx all together.

edmaul69

@mediamogul ok let me know. Im having no luck getting it to switch to 256 colors from b&w with dispmanx on and off. Makes no sense why it is acting like dispmanx doesnt exist.

edmaul69

@mediamogul here is my runcommand log when trying to boot 256 color image

https://pastebin.com/ZuyxBTEY

edmaul69

@mediamogul and here is the log with another mode. it gives an error about the runcommand-onstart. do you know what this means?

https://pastebin.com/F4fZF2pU

edmaul69

@mediamogul one last thing, i found this on emaculation. how do i enable sdl?

"It seems that when I enable the SDL, then I can turn the emulator into 256 colors... However, with SDL enabled, I have very poor performances :-(
Without SDL enabled, performances are amazing (but no 256 colors)."

mediamogul

@edmaul69

No luck here either. It seems like it's one of those SDL issues that might come and go as it pleases.

it gives an error about the runcommand-onstart. do you know what this means?

Can you post your runcommand-onstart.sh up until line 6?

edmaul69

@mediamogul ok well i cant get 256 to ever boot fully. here is my runcommand-onstart

edmaul69

@mediamogul so it dawned on me that 32bit works with dispmanx enabled. So i am pretty sure dispmanx isnt working on basilisk. Not sure how to test it in another emulator.

mediamogul

@edmaul69 said in Macintosh (Basilisk II) 8-bit Color:

here is my runcommand-onstart

Three things. First, you should add a shebang to the top of your script

#!/bin/bash

The second is my fault. Both if/else statements for onstart and onend are missing a 'then' in my original example. I've corrected it above. Lastly, you have $2 as being the system name when it should be $1

if [ "$1" = "macintosh" ]; then

edmaul69

@mediamogul top of what script am i putting a bin bash?