Going to attempt a gba pi zero build

moosepr

@obsidianspider oh yeah! Well then you can have 6 of each, there are enough spare gpio

radiofreero

use a Raspberry Pi Zero board with gpio or buy this and use the case you were going to use.

radiofreero

or this or this

radiofreero

or you could try something like this

meleu

Hey guys, I misread the OP question. He is asking if the hardware fit on that housing.

I would like to make another question: Is raspi zero able to run GBA games?

Actually I don't have a raspi zero, but I tried Castlevania: Aria of Sorrow on my raspi1 and the performance isn't good (used mGBA core).

radiofreero

@meleu Yes because it runs perfectly on the Raspberry Pi 2 which has almost the exact same specifications. The difference is a quad core (like the one the Raspberry Pi 3 uses, but slower). Maybe you should wait till the Raspberry Pi Zero W comes out (the W stands for wifi, and Bluetooth controller.) Much like the Raspberry Pi 3... the Raspberry Pi Zero W will come with almost everything you need. Well except for the fact you have to solder everything. I was answering @anthonyp555 's question about using a USB controller, and offered an idea as a better solution. Since the GBA case only has very limited space that is.

meleu

@radiofreero Thanks bro. I'm interested in both answers! :-)

radiofreero

@meleu the RPi2 uses a dual core.

meleu

@radiofreero I think it's a quad core processor. Look here: https://www.raspberrypi.org/products/raspberry-pi-2-model-b/

radiofreero

@meleu

radiofreero

@meleu found that on YouTube amongst many others.

radiofreero

https://www.raspberrypi.org/forums/viewtopic.php?f=78&t=143908 here's another one @meleu @anthonyp555

radiofreero

https://retropie.org.uk/forum/topic/960/neopigamer also there's this project @meleu @anthonyp555 which was at the bottom of my last link I posted.

meleu

@radiofreero Oh boy! I would love to have one of that!!

anthonyp555

I think I'm going to order a replacement shell for a gba pi and also an original old school gameboy and figure out which one will fit the components better, I like the idea of the original gameboy also because it has more of a retro feel, also does anyone know if its possible to power the pi zero from 4 AA batteries because that's what the original gameboy uses

obsidianspider

@meleu A Zero is significantly slower than a Pi2. It can run GBA games, but not consistently smoothly. Even SNES games aren't perfect. It works, but it's not great. That's what got me to cut down a Pi3 to fit one in my build.

anthonyp555

@obsidianspider will a pi 3 fit into the shell of an original gameboy

obsidianspider

@anthonyp555 It can, but with some caveats. I've seen it done without removing components from the Pi itself, but the ones that I think look the nicest are when the "sticky outy bits" have been removed from the Pi that you won't be using anyway.

radiofreero

@obsidianspider "Sticky outy bits", and breaking the board... It doesn't sound like you know what you are talking about. Have you ever even seen a Raspberry Pi 3 before?

obsidianspider

@radiofreero nope. Never.