Force HDMI over Raspberry Pi Official LCD Screen

Centrosome

Very useful thank you!

I already used nano to modify config.txt but I did not know you could use it to write a script.

I keep you updated asap (probably next week cause I'll be abroad this week end)
Cheers

Centrosome

So I tried but I was stuck.
I created the two different config.txt file (HDMI and lcd)

But I'm stuck in the end of the tutorial
https://retropie.org.uk/forum/topic/5527/raspberry-pi-official-lcd-screen-or-hdmi-option

It says to add the script in /etc/profil.d/10-*****.sh
and to add this

/home/pi/displayBoot/initDisplay.sh
sleep 5

before emulstation instruction.

Could you explain that part for me cause I don't really understand. $
I understand that this is to run the script before emulstation but I don't understand what to do.

Thanks a lot in advance.

langy1987

@Centrosome I'll have a look when I get home. I don't have access to my RetroPie atm.

Centrosome

Thanks Langy1987 did you figure out?
Thanks in advance

sli4

Centrosome, did you ever figure this out?
I too made the same script but can not figure out how to get it to run at startup. I've tried adding the file's path to several files but nothing seems to work.

JDMDingo

anyone get this running?

If I power up the Pi with an HDMI cord attached the LCD display is flipped. If I run the script again it returns:

device_name=SNY-SONY_TV__00

#lcd_rotate=2

Without an HDMI plugged in the LCD is right side up. If I run the script again it returns:

 [E] No device present

so the script is running but is not outputting the the TV. The TV detects the input and says raspberry but remains black.

Edit:

adding:

ignore_lcd=1

to the "config_hdmi.txt" file now turns off the LCD and switches to the TV.

JDMDingo

Also there is a typo in the original post. When you edit the /etc/profile.d/10-*****.sh, it should be:

# switch between LCD and HDMI
/home/pi/initDisplay/initDisplay.sh
sleep 5

instead of /home/pi/displayBoot/initDisplay.sh

JDMDingo

@sli4 let me know if you got it running. Did you make the files (initDisplay.sh, config_hdmi.txt and config_lcd.txt, hdmi.name) in windows? Is so you need to convert them by using:

sudo apt-get install dos2unix
sudo dos2unix /home/pi/initDisplay/initDisplay.sh

I also converted the config files, however that was probably not necessary.

Also the original post is not really clear about the configs. You copy all the text from config.txt and paste it into config_hdmi and config_lcd. Inside config_hdmi.txt scroll down untill you see “#hdmi_drive=2” and remove “#” then scroll to the bottom and add “ignore_lcd=1”. In config_lcd.txt scroll to the bottom and add “lcd_rotate=2”.

goobatroopa

I'm gonna try and get this working. I have been using the old "pull out the GPIO pin cable" trick on my handheld unit and whilst it works a charm, its a bit lame to not try and get it sorted properly.

sli4

@JDMDingo said in Force HDMI over Raspberry Pi Official LCD Screen:

Also there is a typo in the original post. When you edit the /etc/profile.d/10-*****.sh, it should be:
# switch between LCD and HDMI
/home/pi/initDisplay/initDisplay.sh
sleep 5 
instead of /home/pi/displayBoot/initDisplay.sh

I had not gotten it to work. When i boot up i now get a bunch of errors about initDisplay.
I'm going to try thes again when i have access to the pi. for now i'm doing what the poster above me was doing and just pulling out the gpio cables. :/

goobatroopa

@JDMDingo said in Force HDMI over Raspberry Pi Official LCD Screen:

@sli4 let me know if you got it running. Did you make the files (initDisplay.sh, config_hdmi.txt and config_lcd.txt, hdmi.name) in windows? Is so you need to convert them by using:
sudo apt-get install dos2unix
sudo dos2unix /home/pi/initDisplay/initDisplay.sh
I also converted the config files, however that was probably not necessary.

Also the original post is not really clear about the configs. You copy all the text from config.txt and paste it into config_hdmi and config_lcd. Inside config_hdmi.txt scroll down untill you see “#hdmi_drive=2” and remove “#” then scroll to the bottom and add “ignore_lcd=1”. In config_lcd.txt scroll to the bottom and add “lcd_rotate=2”.

This is the clearest part of the thread. Thank you. I was getting very confused at the start.