Dreamcast Controller Mapping Support
Hi All, I just installed Retropie on a Pi 3. I got pretty much everything working except I can't get my controllers to run. The VMU screen comes up and then I can't move. I have uninstalled and reinstalled already once. I updated the mappings and the controllers and then scripts to ensure the emu and controllers mappings where all linked together correctly as per the wiki guide. I am using the 8bitnes30 controllers. I'm just at a loss. Not sure what other steps to take. Thanks.
simonster last edited by
I'd like to help, but first let's start with the info in https://retropie.org.uk/forum/topic/3/read-this-first then we can go from there.
I would really appreciate the help. Thanks. Here's the info:
Pi Model or other hardware: (B, B+, 2 B, 3, X86 PC etc..) 3
Power Supply used: (If using a Pi) 2.5V
RetroPie Version Used (eg 3.6, 3.8.1, 4.1 - do not write latest): 4.2
Built From: (Pre made SD Image on RetroPie website, Berryboot, or on top of existing OS etc.. - please provide the filename of any image used) retropie-4.2-rpi2_rpi3.img
USB Devices connected: Logitech Wireless Keyboard (K360)
Controller used: 8Bit Nes 30 Pro
Error messages received: None
Log found in /dev/shm/runcommand.log (if relevant):
Guide used: (Mention if you followed a guide)
File: (File with issue - with FULL path)
Emulator: (Name of emulator - if applicable) Reicast[1_1499001069337_controller_8BitdoNES30Pro.cfg](Uploading 100%) [0_1499001069337_emu.cfg](Uploading 100%)
I think that is all the information I have. I tested in evdev and verified the control and mapping. Not sure of next steps. Thanks again for the help!
Is there anyone out there that could help me try to troubleshoot my dreamcast controller config issue? Any help would be greatly appreciated. Thanks!