Is it better to have a fan blowing on the pi or blowing out?
-
Depends on how the air flows flow thru.
I prefer blowing out as dust does not settle as easily. -
Hmm well my case does have one ventilation hole.
-
@redbatman in your case I'd use suck .... Nobody has addressed negative pressure if your case is sealed you will not be able to blow more air in than the volume of the case. If you use pressure to your advantage you can turn over the air inside many times more than blowing , and put less stress and less power draw. If dust is a issue fit a little filter cut a stocking up. But it's a pi so either way will work just sucking is more efficient in a sealed case
-
If the enclosure is totally sealed, then negative pressure will be an issue. But for the RPi, there will always be ventilation paths through the connection ports such as the GPIO area, camera port, LCD port, etc to release the pressure. Besides hot air rises, so it is better to blow the air out.
-
Well to give a better understanding my case is one of those Zebra Virtue cases.
-
-
@redbatman First of all, you ask for everyone's opinion, and we have given it truthfully. Now that I see the case that you have, it has plenty of holes on the side that can either disperse the hot air out or draw the cool air in, and therefore the preference is yours not ours. It is now a matter of whether you would want for the fan to blow dust into the heatsink or draw it from the vents.
Personally, I do not even use a fan or a case on my setup. The RPi is good without it. The fan will just present itself as another load on the power supply, and in the long run will just present itself as a mechanical failure. Also, an enclosure is just too constrictive. -
@ortsac
Good choice
I also prefer the bare PI and if I'm using housings then kinda that.
-
@cyperghost couldnt decide on one flavor of pi? 😄
-
I thank everyone for their replies.
-
@edmaul69 Well as are here some discussions that the future PI might be a bit faster (more CPU power, more GPU RAM....) this is the best soulution for now.
[IRONIC OFF]This is just a picture from a store... Wasn't able to find one with only two layer :)
But these kind of cases works very well - don't look very ugly and provide good cooling.Indeed I have one PI B rev1 still in use ... it's a little heatball.
-
Blowing on the Pi gave me best results
-
@retrofreak89
It will. because the flow is aimed directly at the cpu sink.
This is why i said it depends on the flow thru the case. -
@xeon my case has holes at the bottom so it blows onto the arm CPU then the air goes underneath and out the case
-
@retrofreak89 said in Is it better to have a fan blowing on the pi or blowing out?:
@xeon my case has holes at the bottom so it blows onto the arm CPU then the air goes underneath and out the case
When it sucks the flow is spread over a large area.
When it blows the flow is aimed directly at the cpu.
So a larger amount of air hits and pushes away heat when blowing directly on the cpu.However blowing increases dust build up and sucking decreases it.
Choose wisely.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.