Trouble with bezels

Bosco

I have a pi3b I am running Damaso's 32 gb image(very good) But it has bezels on everything except N64. Ok so I find Mad little Pixels video about adding bezels in the system you want by first loading a game, then pressing x + select and getting to the menu. Doing that with my 2.4 gig wireless controllers won't do anything. So I plugged in my Buffalo wired controllers. Still nothing. So I hooked up a keyboard and nothing. So I am guessing the maker decided to block out other commands during play. So I looked around and saw runcommand. I checked it it is enabled. I installed WinSCP and added that bezel and a few more to the list through the opt folder. But to get them instaleed, can that be done through Winscp?

mitu

@bosco Yes, using WinSCP you can copy any file on the RPI filesystem. Note that 3rd party images are not really supported on the forum, as you have seen, they're greatly different than a stock RetroPie system - https://retropie.org.uk/forum/topic/3/read-this-first

simonster

It sounds like the hot keys have been removed from the config. Have you tried asking Damaso? Given it is their image, they should be supporting it.

jonnykesh

@bosco As has been said by others, third party images are not supported here.
However, I would say the reason is that N64 is running on standalone mupen64plus and not the lr- libretro / RetroArch core.
Standalone mupen64plus does not support bezels / overlays.

Edited to add: This is the problem with using someone else's set-up. You have no idea how it was set up or how it is configured and when you run into issues you have no idea why or even where to start to fix the problem (Or non-problem in this case).