Skyscraper now officially part of RetroPie, please test

mitu

@muldjord I thought you might have implemented this and checked the docs (clihelp.md), but I didn't see it mentioned (and it doesn't appear in the --help output also).
I reported a bug in the V2 WebApi last week (the same forum thread on the ScreenScraper site) where searching by gameid didn't work just with the ID, so it might not have worked before - should work now, I tested it in the ES scraper. I think TGDB should also work with the ID - I know it worked before and I've seen it in the new added to the new ES TGDB scraper version (see here).

muldjord

@mitu, are you aware of this? https://github.com/muldjord/skyscraper/issues/134

I've tested the purge command and it works just fine. It shouldn't even be looking for artwork.xml if the command line is correct for it. I don't use the script myself so I can't test.

mitu

@muldjord No, but I'll take a look.

EDIT: I think I know why it fails - I'll submit a fix tomorrow. The old purge used simple rm commands, the new method uses the Skyscraper's command, but I forgot to make it run as the normal user. Since the RetroPie setup runs as root, the error is probably because that user doesn't have Skyscraper set-up properly.

muldjord

@mitu said in Skyscraper now officially part of RetroPie, please test:

EDIT: I think I know why it fails - I'll submit a fix tomorrow. The old purge used simple rm commands, the new method uses the Skyscraper's command, but I forgot to make it run as the normal user. Since the RetroPie setup runs as root, the error is probably because that user doesn't have Skyscraper set-up properly.

Sounds plausible. Thanks for looking into it.

2fst4u

@mitu hi there, submitter of that issue here. Thanks for looking into it and good to hear that it shouldn't be too difficult (relatively) to sort out.

In the meantime, is there anything manual that I can try to make it work or would it be best to just wait for a fix?

mitu

@2fst4u Hello and thank you for the bug report.
I've submitted a fix for the problem you reported (https://github.com/RetroPie/RetroPie-Setup/pull/2658) - I think you should wait to be added to the RetroPie-Setup script and then just update to get the fix.

2fst4u

@mitu ok thank you. How can I check that it's ready to be updated? Will you let us know?

mitu

@2fst4u Sure, I'll add a comment when the fix is added.

ZestyTS

Just found this thread, I believe I'm having trouble with the scriptmodule.

@mitu

Using Skyscraper (3.1.3) on RetroPie (4.4.9) I'm unable to select some of the options for Skyscraper from the RetroPie setup, either through command line or ssh. Example, upon loading up the GUI, clicking gather resources, I'm unable to select any of the platforms for resource gathering. I've tried reinstalling SkyScraper and RetroPie, but that hasn't fixed the issue.

Like if we look at the picture you uploaded earlier, I'm unable to select "Gather and cache resources" it just refreshes the screen as opposed to bringing me to a new screen about starting the scraping process.

mitu

@ZestyTS said in Skyscraper now officially part of RetroPie, please test:

Like if we look at the picture you uploaded earlier, I'm unable to select "Gather and cache resources" it just refreshes the screen as opposed to bringing me to a new screen about starting the scraping process

That's not an action, it's just a heading for the actions beneath it. It's supposed to act like that. Use the Gather Resources - the next menu beneath it.

ZestyTS

@mitu

I see that explains why the page refreshes. So I tried "Gather resources" before but I'm unable to check/select any of the platforms, I just tried it again and I'm still having the issue. I guess, the easy question is, "what are the key combinations required to select an option?"

mitu

@ZestyTS The Space key acts as a toggle/checkbox, that's how you select.

iainjh

Hi! when will that purge issue be addressed please? is there a manual workaround? My image is full up and I have no way to delete.

Its a fantastic scraper btw! - sorry for hassle

ZestyTS

@mitu Thanks for getting back to me, that works over ssh, but not with my keyboard plugged into the raspberry pi, so I'll have to figure out what that's configured as, but thanks!

mitu

@iainjh Use the command line parameters to purge/vacuum - https://github.com/muldjord/skyscraper/blob/master/docs/CLIHELP.md.

mitu

@2fst4u @iainjh The fix has been added to the module in the project's repository - update your RetroPie-Setup script and then try again the purge/vacuum functions to see if you still get the error.

2fst4u

@mitu awesome that works fine now. Thank you very much for your help.

mitu

@2fst4u Alright then - thank you again for reporting the bug.
If you find any bugs/problems/questions with the menu/scriptmodule, please use this topic, I'm always notified when someone posts.

iainjh

Lovely job, working beautifully now. thank you!

2fst4u

Hi, just a question out of curiosity:

What happens when you scrape with a second source after having already scraped everything once? Does Skyscraper only scrape for information/files that were missing, or does it re-scrape everything? I see in the docs it mentions a couple of times about using a second source to fill in gaps, but I can't find anywhere what it actually does when you use a second source.

I also understand there is a way to set priorities for scraping sources. If the answer to the above question is "it only scrapes missing information", then what does this priority do? Does it overwrite data from a lower priority source and leave higher priority data untouched?