Wired Controllers Recommendations
-
@cybrasty I still recommend the SNES clone Buffalo Classic USB Gamepads. They feel really good and I play mainly with it. For the shmups, the turbo function for each button can be very handy at times. The d-pad feels just a little bit sharper and stiffer than the original, I think (no comparison available here). And it is cheap in price.
https://lifehacker.com/the-best-controllers-for-retro-gaming-1791090209
-
@thelostsoul The Buffalos are definitely solid controllers when they aren't driving me nuts with ghost inputs. I've been unlucky with the ones I purchased, but others have reported having no problems at all. They are a decent option for sure compared to some of the cheapos.
-
@beldar This is the first time I read bout the ghost inputs. I think there is an older and newer revision of them, maybe fixed. I have 2 of them, playing with one only but since 7 month no complain and no sight of ghost inputs. I have the model No: BSGP815GY. If yours is the older one, then I would assume the newer one have no ghost input problems anymore.
https://www.reddit.com/r/RetroPie/comments/6h3z9i/two_different_buffalo_classic_usb_gamepads_on/
-
@thelostsoul Mine are the same model number as yours. I've owned three and tested them on multiple pis. It seems to be a luck of the draw kind of thing as both the model numbers suffer from this flaw. You got lucky and I got unlucky, but such is life. There are tutorials online about how to fix the ghosting, but it requires soldering.
-
Just picked up a hori pokken pad thanks to this thread and some other threads. Just waiting for it to ship.
Constantly having issues with Buffalo pads breaking down, mainly the D-pad. Now it sticks to going right no matter what. Second time this has happened.
Hope I don't regret this purchase.
-
I'm pretty sure this is the ultimate controller.
"If you're gonna play the Game Boy, You gotta learn to play it right" - https://www.youtube.com/watch?v=FYLGl92ETNQ
-
@thedatacereal said in Wired Controllers Recommendations:
I'm pretty sure this is the ultimate controller.
Ha! Very nice. Every so often I break out my Power Glove to play on RetroPie and believe it or not, it's actually a lot of fun in small doses. It's even quite a bit more accurate than most people give it credit for, so long as the original setup directions are followed. My particular favorite has always been 'Rad Racer', just like in 'The Wizard', as the controls feel just right and it really gets the blood pumping.
The guide you linked to allows for full access to all the Power Glove inputs at any given time, but you can also make use of a common NES to USB adapter to use it as it was originally intended. What's more, it also works great for any system with an identical or lessor button layout, like GameBoy, Master System, TurboGrafx-16, Atari 2600... etc along with any computer or arcade games that can get by with four directions and four action buttons. Needless to say, I love the Power Glove... It's so bad.
-
@mediamogul I loved the Wizard and the fact they used Rad Racer which is one of my favorite games. Being able to choose the soundtrack made the game super fun, you could set the mood for a country drive or a fast paced night city race which wasn't and still isn't a common feature. I never owned the power glove but have been tempted to find one to play with as I only got to play with it at a friend's house across the street.
In my mind it was ahead of its time, maybe not the first idea like it but the most well known. The Glove was basically an early attempt at what VR is today, to actually be in the game,and oraybe the Wii controller, at least for games like Punch Out. I was always a big fan of Nintendo and its concepts, its controllers alone are still regarded as the best retro controllers to this day, even if its really just the nostalgic feel of the buttons and pad burned into our brains from an early age, much like growing up on Kraft Singles and then going to a friend's house and their mom serving Borden's which seemed to pale in comparison.
Everything about the NES brings up happy memories, not just from gameplay but also from things like wrapping the controller around my waist and chasing my brother outside while holding the B button just like Captain N taught us to do.
"If you're gonna play the Game Boy, You gotta learn to play it right" - https://www.youtube.com/watch?v=FYLGl92ETNQ
-
@thedatacereal said in Wired Controllers Recommendations:
Being able to choose the soundtrack made the game super fun
... and what a soundtrack it is. The tunes are all great. Squaresoft really got everything right all around and even though it may be blasphemous to some, I actually like the game better than the 'Outrun' port over on the Master System.
I never owned the power glove but have been tempted to find one to play with
If you ever do, make sure to check out the original instructions online. There's a step where you make a fist and flex your hand a few times that most people ignore before centering that greatly improves the accuracy. Still, I would never rely on it for precision control, but there's more than a few games that are a lot of fun to play with the glove.
much like growing up on Kraft Singles and then going to a friend's house and their mom serving Borden's which seemed to pale in comparison.
Man, do I love that comparison and I know exactly what you mean.
-
@beldar I have two Buffalo pads, and I've experienced ghost inputs as well (i.e. when in Emulation Station menu, it would go down on its own, without any input from me).
What worked for me was to "clear" every button with the "clear" hotkey. It's worth a try if you've not done it already. -
@lesabotageur I did try that with no luck. However, I did do a little experiment with the Buffalo pads I have this morning. For reference, both the ones I tested are the 815 models. For some reason they have some additional components on their PCB compared to the 801 model, but have the same ghosting issue.
This morning I plugged in my two 815 Buffalos in a fairly stock install of Retropie running on a 3B+. Both of the controllers were giving ghost d-pad inputs in the menus and in games about once every 5 to 10 minutes. I opened the controllers, cleaned the contact pads on the PCB with alcohol, reseated the rubber, then reassembled the units. They behaved exactly the same way with ghost inputs every few minutes.
Then I plugged them into my other emulation machine, a 7th generation Intel NUC i5. The USB ports on it are all 3.0 or higher with far greater power output capabilities. I tested the controllers in the Windows 10 controller properties menu with no ghost inputs registering. Then I opened launchbox in Big Box mode and let it sit in the menus. Again, no ghost inputs. Finally, I played Final Fight for a full hour (did pretty well too) and I didn't notice a single hick up in play.
This makes me suspect that for some reason these little things are very inefficient with their power or have very cheap noisy wiring. I suspect that "Buffalo" has never fixed the issue because they probably test their stuff on higher power output PC's and likely not on a little bitty Pi. It does confuse me a little bit, because even USB 2.0 ports should provide well beyond the miniscule amount of power these things need.
My electronics knowledge is amateur and self taught while buring myself with a soldering iron many times. Perhaps somebody with a deeper understanding of electronics can provide more information than I can.
-
@beldar Brunnis over at the libretro forums did some investigation into this.
HowTo: Fix phantom/ghost input on iBuffalo/Buffalo SNES controllers
-
8bitdo, high quality? I didn't know there was a comedic section in here. The dpad is horrendous, with it registering opposite inputs when tilting a direction. A direction has to be pressed right on the center of a direction. There's tape mods but they didn't work for me. They ended up requiring to press harder. Their battery tech is the old type where it drains when it's off..at least with my old SFC30. A ps4 controller can be cheaper than an snes/sfc30 pro when it's on sale.
As I can see, only their DIY kits seem to have the same dpad pcb layout as the real thing. I use the real things and they're around $12-15 used for japanese or US version + usb adapter. I'm using a real sfc's controller ports so I wouldn't know what usb adapter is good.
-
@rion Thanks for the link! I saw the images with a description of the fix somewhere before but I didn't see that discussion then. It seems like I was almost sort of right about something for once!
-
@beldar said in Wired Controllers Recommendations:
@thelostsoul Mine are the same model number as yours. I've owned three and tested them on multiple pis. It seems to be a luck of the draw kind of thing as both the model numbers suffer from this flaw. You got lucky and I got unlucky, but such is life. There are tutorials online about how to fix the ghosting, but it requires soldering.
I've had this issue with iBuffalo controllers disappear when I connect them to a USB hub with its own power supply. Are you connecting your iBuffalo controllers directly to your rpi? Are you sure your controllers are getting enough amperage?
-
@markwkidd I suspect that a powered USB hub would help with the problem, yes. In the little test I did the controllers were plugged directly into the USB ports on the Pi and then on the NUC. I do have have powered USB 3.0 hub, so maybe someday I will test that at some point to see if I have similar results. But, the data probably won't be that useful to me personally as I hate having a big old hub hanging off my Pi.
-
@beldar said in Wired Controllers Recommendations:
But, the data probably won't be that useful to me personally as I hate having a big old hub hanging off my Pi.
This is my gripe about the iBuffalo too -- a powered hub defeats the point of having a single board computer in the first place unless the SBC is built into something like an arcade cabinet where the hub is invisible.
-
Was USB improved on Pi3+?
Debated on upgrading to it but also feel Pi 4 may come out early next year.
-
@mat said in Wired Controllers Recommendations:
Was USB improved on Pi3+?
Outside of improvements to USB mass-storage booting, I don't believe so. Other, improvements included a higher default clock speed, Improved WiFi and Bluetooth, as well as Faster Ethernet and power over Ethernet with a requisite HAT.
-
Once again thanks everybody for recommendations and nostalgia trips.
I went with iBuffalo SNES controller. It will be here in few days, I thought if ghosting will be a real problem I can always return it (ordered from amazon). Fortunately, my setup has a powered USB hub and I run my controllers through it, so hopefully that will solve any possible ghosting.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.