HifiBerry Amp2

[Raspix]

Hello,

I'm striving to make it work over 2 years now.....no comment...so upset of raspbian....

I hear absolutly nothing with my addtional sound card hifiberry AMP2

Here is the full description of my portable-OS :) :

Raspbian Stretch Lite
Minimal image based on Debian Stretch
Version: June 2018
Release date: 2018-06-27
Kernel version: 4.14
Release notes: Link

Thanks in advance,
I also try to modify the config file by replacing dtoverlay=hifiberry-amp by
dtoverlay=hifiberry-dacplus

pi@raspberrypi:~ $ aplay -l

aplay: device_list:270: aucune carte son n'a été trouvée...

pi@raspberrypi:~ $ lsmod

Module Size Used by

fuse 106496 3

rfcomm 49152 6

bnep 20480 2

hci_uart 36864 1

btbcm 16384 1 hci_uart

serdev 20480 1 hci_uart

bluetooth 368640 29 hci_uart,bnep,btbcm,rfcomm

ecdh_generic 28672 1 bluetooth

snd_soc_pcm512x_i2c 16384 0

snd_soc_pcm512x 32768 1 snd_soc_pcm512x_i2c

brcmfmac 307200 0

brcmutil 16384 1 brcmfmac

cfg80211 573440 1 brcmfmac

rfkill 28672 6 bluetooth,cfg80211

i2c_bcm2835 16384 0

snd_soc_bcm2835_i2s 16384 0

lirc_rpi 16384 0

fixed 16384 0

clk_hifiberry_dacpro 16384 0

lirc_dev 16384 1 lirc_rpi

uio_pdrv_genirq 16384 0

uio 20480 1 uio_pdrv_genirq

evdev 24576 6
hid_apple 16384 0
snd_soc_hifiberry_dacplus 16384 0
snd_soc_hifiberry_dac 16384 0
snd_soc_pcm5102a 16384 0
snd_soc_core 188416 5 snd_soc_pcm512x,snd_soc_hifiberry_dacplus,snd_soc_bcm2835_i2s,snd_soc_hifiberry_dac,snd_soc_pcm5102a
snd_compress 20480 1 snd_soc_core
snd_pcm_dmaengine 16384 1 snd_soc_core
snd_pcm 98304 6 snd_soc_pcm512x,snd_pcm_dmaengine,snd_soc_hifiberry_dacplus,snd_soc_bcm2835_i2s,snd_soc_core,snd_soc_hifiberry_dac
snd_timer 32768 1 snd_pcm
snd 69632 4 snd_compress,snd_timer,snd_soc_core,snd_pcm
i2c_dev 16384 0
ip_tables 24576 0
x_tables 32768 1 ip_tables

ipv6 434176 27

====================================================

Sound Card KO with AMP 2.0 and the latest version of Raspbian OS.

Here below is the Config File :

hdmi_drive=0

dtparam=audio=on

uncomment to increase signal to HDMI, if you have interference, blanking, or

no display

#config_hdmi_boost=4

uncomment for composite PAL

#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800

Uncomment some or all of these to enable the optional hardware interfaces

dtoverlay=hifiberry-amp

dtdebug=1

#dtparam=i2c_arm=on

#dtparam=i2s=on

#dtparam=spi=on

Uncomment this to enable the lirc-rpi module

#dtoverlay=lirc-rpi

Additional overlays and parameters are documented /boot/overlays/README

Enable audio (loads snd_bcm2835)

start_x=1
gpu_mem=128
enable_uart=1
dtoverlay=w1-gpio

[Zilch]

Following. Mine hasn't worked for a few years now either. Very disappointing. Does anyone have this working?