Streets of Rage Remake (latest retropie 2019)
-
Editing system.txt in order to change system to PSP indeed shows the Exit option. However, choosing this option will prevent you to play in 2 players coop with two controllers, so I haven't used this approach.
In my case, when I want to exit SORR, I simply turn off my device (force shutdown) and turn it on again afterwards. Of course, I make sure it doesn't happen during saving times, in order to reduce possibility of data corruption. It's not a perfect solution, but at least I don't need to plug a keyboard in order to press ESC.
-
@Solid-One only other way to avoid this is to use xboxdrv to make a custom mapping for sorr. The bigger issue for me is that with the pi 4, sorr no longer scales to fill the whole screen. I'm forced to change resolution to 640x480 and reboot my pi each time I want to play it.
-
@quicksilver That's news for me. I'm still using older RetroPie versions, since my RPi is still model 2.
Anyway, if I'm not wrong, I guess the one responsible for scalling games in full screen is not SORR itself, but something else. Probably SDL2 or some video framebuffer app (don't know the right name for it). There's some way of doing that by tweaking video configs of that nature.
Last but not least, at least there's an option for changing resolution for each app individually, on RetroPie. You could simply force SORR to run on 640x480 this way. I've done the same on ZDoom a few years ago, in order to stretch full screen and remove side bars.
-
@Solid-One said in Streets of Rage Remake (latest retropie 2019):
Last but not least, at least there's an option for changing resolution for each app individually, on RetroPie. You could simply force SORR to run on 640x480 this way. I've done the same on ZDoom a few years ago, in order to stretch full screen and remove side bars.
Unfortunately this is not an option for emulators that are not sdl2 on the pi 4. The way scaling works on the pi 4 with the fkms display drivers are different than on the older models with the legacy drivers. Since it doesn't work for sorr I can conclude that sorr isn't using sdl2.
-
@quicksilver I dunno how much RetroPie has changed for RPi4, but out of curiosity, have you tried this?
- Open SORR, and pay attention to the image below;
- When it says "Press a buton to configure", press it to reach a screen similar to this:
- Try changing values in "Select default video mode for sorr (bgdi)" or "Select video mode for sorr (bgdi)", in order to change SORR resolution to 640x480.
With this option, whenever I opened zdoom, it automatically changes resolution to 640x480, and reverts it when zdoom is closed. If this option is still available on RPi4, then it should work for SORR and at least you won't have to force change resolution manuually.
- Open SORR, and pay attention to the image below;
-
@Solid-One yes this is what I was referring to in my above post. Changing the resolution in the runcommand menu (as you show in your pictures) only works if the emulator uses sdl2. Emulators that rely on sdl1 or other methods will not mode switch (dosbox, linapple, sorr etc) on the pi 4.
-
@quicksilver That's a shame it don't work.
Hey, I found another thing that could help on reddit. Take a look: https://www.reddit.com/r/RetroPie/comments/gdnjmo/sorr_screen_scaling_resolution/
The idea here is simple: by using "runcommand-onstart.sh" and "runcommand-onend.sh" files, you can manage to run comands before starting SORR and after ending it. On the first file, you change resolution to 640x480, and on the latter, you revert back to the original resolution.
CONTENT OF THE LINK ABOVE
I've made the following scripts (placed in /opt/retropie/configs/all/) for changing the video mode before running SORR, and reverting it afterwards:
#! /usr/bin/env bash echo "Hello logfile - runcommand-onstart checking in here" >&2 #START SORR SECTION - SNIP CONTENTS IF PASTING INTO EXISTING SCRIPT if [ $2 = "sorr" ] then echo "sorr detected - changing video mode to 640x480@60hz" >&2 tvservice -e "DMT 4" fi #END SORR SECTION#! /usr/bin/env bash echo "Hello logfile - runcommand-onend checking in here" >&2 #START SORR SECTION - SNIP HERE IF PASTING INTO EXISITNG SCRIPT if [ $2 = "sorr" ] then echo "Reverting display back to preferred mode" >&2 tvservice -p fi #END SORR SECTION -
@Solid-One Thanks for reminding me of this! I actually commented in that thread but forgot to check back for a solution. The solution in that thread while not elegant did work for me.
Edit: Im now also using this method to force 640x480 mode for dosbox, which means I can get much better performance now :)
-
@Solid-One said in Streets of Rage Remake (latest retropie 2019):
if [ $2 = "sorr" ]
then
echo "Reverting display back to preferred mode" >&2
tvservice -p
fiHi. I will likely update the installation script to use bgdi-333 and maybe implement the automatic switch to 640x480 through onend and onstart as mentioned above. I'm just weary of potentially causing problems for those who can't use that resolution (if there's anyone out there that has that problem).
-
@zerojay hey man good to see you around these parts again. I have found a better way to get the game fullscreen instead of forcing 640x480 through the start/end scripts. If you run the game through an x session the game will scale properly without any extra fiddling. You just need to add XINIT: to the beginning of the launch script. You'll also need to add xorg as a dependency. Note that this is only needed for the pi 4. Sorr still works correctly on older pi models.
-
@quicksilver Yeah, I'm not sure how I feel about forcing xorg as a (very large) dependency. I'll have to give it a try first.
-
@quicksilver said in Streets of Rage Remake (latest retropie 2019):
@zerojay hey man good to see you around these parts again. I have found a better way to get the game fullscreen instead of forcing 640x480 through the start/end scripts. If you run the game through an x session the game will scale properly without any extra fiddling. You just need to add XINIT: to the beginning of the launch script. You'll also need to add xorg as a dependency. Note that this is only needed for the pi 4. Sorr still works correctly on older pi models.
Can you show me exactly what the script should look like as it didn't seem to work for me as you describe.
-
@zerojay here is the first line in my emulators.cfg for sorr
sorr = "XINIT:pushd /opt/retropie/ports/sorr; ./bgdi-333 ./SorR.dat; popd"I thought xorg was the only dependency needed to make XINIT work but I may be mistaken. I have not noticed any performance issues on the pi 4 from running sorr this way.
-
@quicksilver said in Streets of Rage Remake (latest retropie 2019):
@zerojay here is the first line in my emulators.cfg for sorr
sorr = "XINIT:pushd /opt/retropie/ports/sorr; ./bgdi-333 ./SorR.dat; popd"I thought xorg was the only dependency needed to make XINIT work but I may be mistaken. I have not noticed any performance issues on the pi 4 from running sorr this way.
Unfortunately appears to fail to start and I don't see an Xorg.log file that I can find the issue in.
-
@zerojay Ill boot up my test image and see if I can figure out the full dependencies needed and report back.
-
@damianiw said in Streets of Rage Remake (latest retropie 2019):
libpng12-0
I've added this as a dependency for the sorr script so it shouldn't need to be done any longer. Thanks.
Also switched to the 333 version of the bennugd interpreter.
-
Hi all, Streets of Rage Remake v5.2 has been released.
Would be great to get this on the Pi, not sure what is involved to do so.
-
@charco i think if there is a build from source ability then i think it might be able to be done
-
Link doesn't work. Here is a working one for 5.2.
There is approximately 300 additional bugfixes, tweaks, gameplay improvements, and new features over the original v5.1 release.
From the README:
"- If you have VSync or frame pacing issues find system.txt (mod/system.txt) and set BORDERLESS_SYNC (not always works, Windows composition or Desktop VSync must be enabled)"Apperently this works for linux to.
Maybe @zerojay can have a look at this?
-
@rion the link does work. I've uploaded in to Mega, it's in that thread.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.