Raspberry Pi: spinner disabled by flight stick

corminos

@IceChes1 I plugged my flight stick, spinner, trackball, and I-PAC2 into the USB hub. But they are still all recognized as separate inputs when doing the tests in /dev/inputs. On your suggestion, I then unplugged the trackball from the hub and tried it, but it still wouldn't work.

I tried using the flight stick when playing tempest and that actually worked. Obviously not what I want, but this is showing that the flight stick is somehow being recognized as the main analog input.

I tried different variations of inputs plugged in:
fs, sp, tb - only flight stick recognized
sp, tb - both spinner and trackball can be used
fs, tb - only flight stick recognized
fs, sp - only flight stick recognized

With the fight stick, I have an old Thrustmaster with a Rockfire gameport to USB adapter.

IceChes1

Plug everything but your trackball into the USB hub, plug that into the Pi's USB, then it SHOULD recognize all your parts as 1 controller. Now reconfigure your controller. Make the flight stick your left analog stick and your spinner as right analog up/down. That may not work, but if it does you are good. If it doesn't then plug the spinner into the Pi's port and use it that way. Configure the ABXY on your controller as you normally would and do all that as well.

IceChes1

I don't know why that didn't work, but maybe there's such thing as a USB combiner...
There isn't. Actually maybe it's your flight stick.

corminos

@IceChes1 I'm still not clear on how to configure the right vs left. Could you please provide more details.

But funny thing I tried. I tried running Afterburner in Mame2003 because I wanted to see if the flight stick would work on that game. It didn't. But the spinner did move the plane left and right >: [

IceChes1

Are you using MAME? If so it might be the emulator just because MAME is dumb.

IceChes1

But by left and right I meant like on a Xbox or PS3 controller with the two sticks. Left stick, right stick.

corminos

@IceChes1 Yes, I am using MAME.

For the controls, I'm going with the nostalgic arcade buttons from my youth, so I'm avoiding using any type of gamepad.

I'm a couple weeks into setting this up and my head is spinning with the different versions of MAME on different operating systems on different hardware. I get halfway through an article and realize it probably doesn't apply to me....oh well, sometimes challenges can be fun.

IceChes1

Try using another emulator. FinalBurn Neo or something. I don't have much experience with arcade but MAME and MESS are both stupidly overcomplicated.

IceChes1

But what I do have experience with is controllers.

corminos

@IceChes1 I'll give that a try. Thank you.

stoney66

@corminos I use advance mame and this works in my setup. I have ipac as well along with separate usb joysticks / trackball. You should be able to just map per game what controls you want to use, for me I have a generic config file that covers 90% of games I play then a different config for games that need a trackball/spinner etc.

IceChes1

Then the problem must be with the stick. But isn't @corminos using lr-mame-2003?

IceChes1

Oh, no they aren't. They didn't say.