lr-dosbox-svn / lr-dosbox-core (new dosbox libretro cores)

[mitu]

Well, it's not crashing anymore - this may be the winning ticket. If you have an automated build, I can give it a test.

[RealNC]

Well, that will teach me to assume that the register keyword is useless. I disabled it to get rid of the GCC warning about register being invalid in C++ now. Turns out that even if you specify an actual register to be used for a variable using __asm("register_name"), you still need the register keyword...

Oops.

Thanks for the help! I'll add the ARM build to the libretro buildbot and upload fixed builds soon.

[RealNC]

(I hope I'm not stealing too much of your time with all this :-P)

Automated build is now up:

https://github.com/realnc/dosbox-core/releases/download/latest_build/linux-armhf.zip

Now, the above is built with GCC on actual Ubuntu ARM. However, building it this way is extremely slow (takes like an hour to build) because I have to emulate ARM in QEMU inside the Azure VM github provides. So I'd like to cross-compile from Intel to ARM instead using Clang. And that build is here:

http://83.212.109.87/~realnc/tmp/linux-armhf-clang.zip

Can you check if the Clang build works just as well as the GCC one? (Assuming the GCC automated build works, that is.)

[mitu]

@RealNC said in lr-dosbox-svn / lr-dosbox-core (new dosbox libretro cores):

https://github.com/realnc/dosbox-core/releases/download/latest_build/linux-armhf.zip

This works, no crash.

Now, the above is built with GCC on actual Ubuntu ARM. However, building it this way is extremely slow (takes like an hour to build) because I have to emulate ARM in QEMU inside the Azure VM github provides. So I'd like to cross-compile from Intel to ARM instead using Clang. And that build is here:
http://83.212.109.87/~realnc/tmp/linux-armhf-clang.zip

This one doesn't work, it crashes - but strangely not if I run in through gdb.

[RealNC]

The 1 hour GCC build it will have to be then.

Thanks!

[jul059]

Not sure where to post this, but dosbox-staging might be worth considering as a core. The pixel-perfect scaling mode looks interesting.

[RealNC]

@jul059 said in lr-dosbox-svn / lr-dosbox-core (new dosbox libretro cores):

Not sure where to post this, but dosbox-staging might be worth considering as a core. The pixel-perfect scaling mode looks interesting.

Pixel-perfect scaling is done by the frontend in libretro cores. Usually called "integer scaling" (RetroArch calls it that, for example.) If you enable that in the frontend, and also turn off the "Video: Aspect ratio correction" core option, you get 100% pixel-perfect scaling. With aspect correction enabled, you get what is sometimes called "near-perfect" scaling.

[nikitau]

Hey, kinda new to this forum so idk if necrobumping is frowned upon, but wanted to share my recent experience with this. I actually got dosbox-core to work quite fine on a RPi4 without any modification of the binary build from github. The setup script is pretty basic and doesn't do much besides downloading the binary and installing it:

#!/usr/bin/env bash

# This file is part of The RetroPie Project
#
# The RetroPie Project is the legal property of its developers, whose names are
# too numerous to list here. Please refer to the COPYRIGHT.md file distributed with this source.
#
# See the LICENSE.md file at the top-level directory of this distribution and
# at https://raw.githubusercontent.com/RetroPie/RetroPie-Setup/master/LICENSE.md
#

rp_module_id="lr-dosbox-core"
rp_module_desc="DOS emulator LIBRETRO"
rp_module_help="ROM Extensions: .bat .com .exe .sh\n\nCopy your DOS games to $ROMDIR/pc"
rp_module_licence="GPL2 https://raw.githubusercontent.com/libretro/dosbox-libretro/master/COPYING"
rp_module_section="exp"
rp_module_flags=""

function sources_lr-dosbox-core() {
    wget "https://github.com/realnc/dosbox-core/releases/download/latest_build/linux-armhf.zip"
}

function build_lr-dosbox-core() {
    unzip linux-armhf.zip
    md_ret_require="$md_build/dosbox_core_libretro.so"
}

function install_lr-dosbox-core() {
    md_ret_files=(
        'dosbox_core_libretro.so'
    )
}

function configure_lr-dosbox-core() {
    mkRomDir "pc"
    ensureSystemretroconfig "pc"

    addEmulator 0 "$md_id" "pc" "$md_inst/dosbox_core_libretro.so"
    addSystem "pc"
}

I only tested it on Prehistorik 2 and Wolfenstein 3D, but they seem to get decent performance. Control mapping and sound seem to work just fine, but I should test performance against vanilla dosbox and see if it holds for more demanding titles (eg. Blood or Duke Nukem).

Sidenote: I did have a lot of the dependencies installed beforehand and the binary does come bundled with some of them so idk at this moment if there is some prerequisite that should be installed by the script. Maybe fluidsynt and/or bassmidi(?)

[RealNC]

@nikitau said in lr-dosbox-svn / lr-dosbox-core (new dosbox libretro cores):

Sidenote: I did have a lot of the dependencies installed beforehand and the binary does come bundled with some of them so idk at this moment if there is some prerequisite that should be installed by the script. Maybe fluidsynt and/or bassmidi(?)

It includes everything it needs, except for BASS and BASSMIDI (due to licensing reasons; these libraries are not GPL-compatible.)

In general, to see which libraries an executable or library needs, you use readelf -d. In this case:

readelf -d dosbox_core_libretro.so | grep NEEDED

BASSMIDI does not show up here because it's optional and thus not linked against explicitly but instead loaded by the core manually if it exists. If not, the core runs just fine, except without BASSMIDI support.

[nikitau]

@realnc said in lr-dosbox-svn / lr-dosbox-core (new dosbox libretro cores):

readelf -d dosbox_core_libretro.so | grep NEEDED

Nice, that is actually good info. Apart from asound and libc which are preinstalled, there isn't anything else. Also performance-wise, with some cycle-tuning, even duke nukem runs fine.

Great work, man! Given the convenience of retraoarch, I'll definitely use this instead of vanilla dosbox from now on.

I might clean the script up in the next days and put it on github in case anybody else wants to run it on RPi (unfortunately I only have armv7/v8 devices so I won't be able to test for older versions of the Pi)

[RealNC]

@nikitau
If you want to enable BASSMIDI support, the ARM versions are posted here:

https://www.un4seen.com/forum/?topic=13804.msg95617

You need the "hardhf" builds of libbass.so and libbassmidi.so. They need to be placed in the libretro system directory, which is where the core looks for them.

[RealNC]

I made an ARM64 build of dosbox-core:

https://github.com/realnc/dosbox-core/releases/tag/latest_build_linux_arm

I don't actually know if it runs, since I don't have an ARM machine. In theory, it should run fine on RPi 4 since it's built on arm64v8 Ubuntu 16.04.