Cannot change emulators resolution from the runcommand screen
-
Hi guys
I'm running a pi4 2GB and I've a problem with my retropie build that I cannot change the emulators resolution from the runcommand screen. I have previously been able to like flycast is set to 640x480 and that has stuck. But I run my pi 4 @ 720p and certain emulators are defaulting to 1080p even if I change this from runcommand screen. The settings are going in to videomodes.cfg (opt/retropie/configs/all/videomodes.cfg) and sticking after a reboot but just are not applying. This is for every emulator.
Any advice would be most appreciated
Pi Model or other hardware: pi4 2GB
Power Supply used: Official
RetroPie Version Used (eg 3.6, 3.8.1, 4.1 - do not write latest): 4.6
Built From: Pre made SD Image on RetroPie website
USB Devices connected: None
Controller used: Wii U Pro
Error messages received: None
Log found in /dev/shm/runcommand.log (if relevant):
Guide used: (Mention if you followed a guide)
File: (File with issue - with FULL path)
Emulator: All emulators
Attachment of config files: (PLEASE USE PASTEBIN.COM FOR LARGE LOGS)
How to replicate the problem: Try changing resolution from theitalicised text -
I found the issue if anyone else has the same problem. I had saved a core config in each of the emulators which caused it to be set in what ever resolution it was in at the time. Configs are stored in opt/retropie/configs/all/retroarch/config/all/retroarch/config/(name of emulator). I deleted them and re set them up in 720p.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.