Sega model 3 #segamodel3

DTEAM

@mechafatnick
Awsome!! Is It updated on your download link? With what you have done, This could work like retroarch hotkeys. For savestate is It a folder problem? For Supermodel.ini, the emulator set control in the emulator folder but read in home/pi/Config that’s why I have use a symlink instead of a new supermodel.ini file (see my post about that above). For savestate it’s maybe the same. Maybe It create it in one place and read in another place.

With dose changes, could it be on the official experimental list in retropie ?

For the fullscreen problem, i’ll try to found a solution for that, but I’m not an expert for that 😁

mechafatnick

@dteam I didn't even think about the possibility of it actually ending up as an experimenal emulator. I just wanted to run some arcade-perfect VF3 :D

I've amended the zips on my guide and also put my amends to the sourcecode up on github for anyone who's interested:
https://github.com/Mechafatnick/SuperModelPi

Folly

@mechafatnick

I followed you guides and installed it on my old x86 laptop, as I am on a holiday.
(works slow, as aspected on my laptop, but now I know it can work !)

Curious how this will indeed work on the pi4.

Your quite far in "development" now.
Are you going to try and make a module-script for it ?

DTEAM

@folly said in Sega model 3 #segamodel3:

Curious how this will indeed work on the pi4

It works very well on a Pi4. The games look a little bit like Naomi or Atomiswave with lr-Flycast.

Red_Trev

@mechafatnick said in Sega model 3 #segamodel3:

@red_trev ahh remember you have two factors in play - the size of the screen the emulator is rendering and then the window the emulator is placed in in the pi.

It sounds like the emulator window is bigger as per the file but the actual window the emulator is being placed into isn't. You should be able to solve it by launching a game from emulation station, entering the configuration menu then changing the default video mode for super model (i use 87-46 myself.)

the one in /home/config is the one you need to edit. The arguments you feed to the editor will take priority so if you want to mess with the resolutions per game you'll need to dump those.

Remember though that the Pi is definitely not the optimum hardware for Model 3 emulation so i wouldn't push the resolution too far!

I have tried everything and cannot get it to display full screen via Emulation Station, it is still stuck in a small box & zoomed in to bottom left corner:

I have tried changing video modes in pre launch menu & Raspi Config menu itself but same result regardless of any change

When I open a game via cmd line without XINIT it does show fullscreen but with slowdown

Here is the contents of the emulators.cfg file:

supermodelHighRes = "XINIT:/opt/retropie/emulators/supermodel/bin/supermodel -game-xml-file=/opt/retropie/emulators/supermodel/bin/Config/Games.xml -legacy3d -sound-volume=50 -music-volume=80 -no-vsync -no-throttle -no-dsb -res=1024,755 %ROM%"

DTEAM

@mechafatnick

Hi

When i'm using your old /opt/retropie/emulators/supermodel/bin/supermodel, It run well, but when I run your new file. I get this message in Supermodel.log

[Error] OpenGL initialization failed: Unknown error

[Info]  Program terminated due to an error.

and in shm/runcommand.log this message

Executing (via xinit): /opt/retropie/emulators/supermodel/bin/supermodel -game-xml-file=/opt/retropie/emulators/supermodel/bin/Config/Games.xml -legacy3d -sound-volume=50 -music-volume=60 -no-vsync -no-throttle -no-dsb -res=496,384 /home/pi/RetroPie/roms/model3/spikeout.zip

/opt/retropie/emulators/supermodel/bin/supermodel: error while loading shared libraries: libSDL2_net-2.0.so.0: cannot open shared object file: No such file or directory
xinit: connection to X server lost

waiting for X server to shut down (II) Server terminated successfully (0). Closing log file.

Could it be your new changes with R3DShaderTriangles.h?

mechafatnick

@red_trev What video mode is 52-20, sorry?

mechafatnick

@dteam That's surprising! try:

sudo apt-get install libsdl2-net-dev

Red_Trev

@mechafatnick 1024x768

DTEAM

@mechafatnick said in Sega model 3 #segamodel3:

sudo apt-get install libsdl2-net-dev

It works with that. Thanks.
UI buttons settings work also with gamepads !!! Fantastic

mechafatnick

@red_trev what happens when you ditch xinit and lower the emulator Res to 496 *384?

Red_Trev

@mechafatnick said in Sega model 3 #segamodel3:

@red_trev what happens when you ditch xinit and lower the emulator Res to 496 *384?

via command line it opens in a small window, should I try that via emulators.cfg ?

mechafatnick

@red_trev yeah lower the resolution in emulators.cfg, keep it for run command :)

Red_Trev

@mechafatnick said in Sega model 3 #segamodel3:

@red_trev yeah lower the resolution in emulators.cfg, keep it for run command :)

but the whole point is not playing in a box a quarter of the screen size... is there any method to remove this limitation? I can see the video is increased but it's focused on bottom left corner, why is it doing this? is it XINIT causing it ?

DTEAM

@mechafatnick

Hi ,

I'm able to save games but doesn't able to load them with this symlink:

ln -s /opt/retropie/emulators/supermodel/bin/Saves Saves

I don't know why for now.

For screen view, in Supermodel.log you can see more options

XResolution=496
YResolution=384
FullScreen=0
WideScreen=0
Stretch=0
WideBackground=0

I'll try those later

DTEAM

@Red_Trev @mechafatnick

For full screen ... I did It !!!!!

1- you have to delete -res=496,384 and replace that by nothing. All the video settings must be done in Supermodel.ini

Supermodel-normal = "XINIT:/opt/retropie/emulators/supermodel/bin/supermodel -game-xml-file=/opt/retropie/emulators/supermodel/bin/Config/Games.xml -legacy3d -sound-volume=50 -music-volume=60 -no-vsync -no-throttle -no-dsb -res=496,384 %ROM%"

2 - Go in Supermodel.ini and add :

XResolution=496
YResolution=384
FullScreen=0
WideScreen=0
Stretch=0
WideBackground=0

3- Set you screen resolution like you want but never use FullScreen. You can use WideScreen, Strech or WideBackGround. With Full Screen, hotkeys stop working.

Mine (5 inch screen)

;setup for 5 inch lcd touchscreen 
;XResolution=496
;YResolution=384
XResolution=800  
YResolution=480
FullScreen=0
WideScreen=1
Stretch=0
WideBackground=0

It slowdown the emulator a little bit, but not that bad.

The only missing thing is loadstate. After that It's complete for me!! Nice emulator

Red_Trev

@red_trev said in Sega model 3 #segamodel3:

@mechafatnick thanks , ill give that a go later ....

i have tried modifying the arcade 'emulators.cfg' to

supermodel = "XINIT:/opt/retropie/emulators/supermodel/bin/supermodel -game-xml-file=/opt/retropie/emulators/supermodel/bin/Config/Games.xml -legacy3d -sound-volume=50 -music-volume=80 -no-vsync -no-throttle -no-dsb -res=1024,768 -fullscreen %ROM%"

when i launched a game, it had the same small video box in the center of the screen, the actual game picture seemed to be bigger but it was zoomed into the bottom left corner (and my controls stopped working)

is there anyway of preventing the output from being displayed like this ?

also there is a method of setting resolution on a per game or global level via the Supermodel.ini file (https://www.supermodel3.com/AdvancedUsage.html#ConfigFile)

as this file appears in 3 places (config, bin, pi/home/config), i assume the same modified file must be placed in each place ?

and even then, how would the values in 'emulators.cfg' affect it ? which set of instructions take precedence ?

thanks again !

@DTEAM well done !! so I was thinking correctly with this ;) again , Supermodel.ini file appears in 3 places, do I have to update all of them ?

DTEAM

@red_trev

If you have done your symlink before:


ln -s /opt/retropie/emulators/supermodel/bin/Config Config

It’s in
/opt/retropie/emulators/supermodel/bin/Config/Supermodel.ini

Red_Trev

@dteam

update Supermodel.ini located in /opt/retropie/emulators/supermodel/bin/Config

then copy that updated file to /home/pi/Config

i assume all controller changes must be saved to that file also?

DTEAM

@red_trev
You can do it like that too. With this method, you need to update both files. If you want use a symbolic link (press F4 or just close Emulation Station and write the proposed above command) with that, you only need to update opt/retropie/emulators/supermodel/bin/Config/supermodel.ini

Both options work