I.K.E.M.E.N GO on Raspberry Pi 4 [Now with an Install Guide!]

[SuperFromND]

Woahhh, stellar work joam! This was a very pleasant thing to wake up to this morning :D

I can't really help out too much on this specifically since low-level instructions and byte-alignment stuff is far out of my realm of expertis, but if you do need me for anything else (testing stuff, etc.) then let me know!

(oh, and the character I was using was the original Donald by Kishio, which can be found here; not that you'll really need it seeing as the palette issues apparently didn't occur for you at all.)

[SuperFromND]

I just forwarded these posts to the IKEMEN devs over on the Discord (which is probably a good idea for you join, by the way; it'll probably help being able to talk with the devs directly), and Gacel stated he's gonna look into adding these changes into the main IKEMEN GO fork (that's the Windblade-GR01 fork, not the LucasFebaits one you seem to be using).

Since I know how to compile and run that fork now, that would theoretically make it possible to compile directly from the main IKEMEN GO fork, meaning we'd always have the newest version of IKEMEN GO available for folks to compile!

If the changes are made and it turns out to work, I could probably (finally) start working on a scriptmodule for this. :D

[joamjoamjoam]

Glad i can help. I joined the discord and ill start getting acquainted with everyone this week. I think Gacel's could be invaluable in helping to align the structures. Luckily Alignment issues usually only affect ARM based systems (other compilers/arch are good at padding things for you) so in theory the padding should only affect these devices.

I gave it a go for like 6 hours last night trying to figure out what needed to be aligned but couldn't get a working build though my results mentioned below with the 64 bit Raspbian tell me that the structures are properly 8-Byte Aligned when using the 64 bit types. So that just means its really close already.

Thanks for the character ill load that one in just to make sure its not that character causing issues and i just got lucky with my character choice.

Also i started with the LucasFebatis repo cause you seemed to be having better results with it but i see that its a little over 1000 commits behind so before we start to byte align things for the 32 bit OS ill migrate up to that version.

Good News! I was waiting on an SD Card to load the 64 bit OS which arrived today and i was able to verify that on the 64bit Beta Raspbian I was able to play the game without any crashes. As far as i can see everything works. Also the performance was pretty good.

Unfortunately I did notice however that when using the X server on the Pi itself i saw the pallette issue but using the external xserver on my PC everything drew up just fine. this makes me think that the Xserver is to blame here. Though it is possible that the rendering is done on the PC side and replaces whatever bugs may on the pi side.

I think the byte alignment issue is a technicality so it shoouldnt be a showstopper on getting Ikemen on the Pi, it will just take some to sort out.

The pallette bug on the other hand seems like it demands attention so i think ill continue my testing on the 64 bit Raspbian and try to see if i can figure that one out but I think ole Lucas was onto what i saw also. He mentions that the XServer may have issues processing gamma ramp so i may start with finding an alternative XServer.

"For Got b'X11: RandR gamma ramp support seems broken"

TLDR

Current State: (Lucas Febatis)
32 bit Retropie OS:
Menus work good
Crashes in Match due to an Alignment Trap processing OC_float in bytecode.go (be[i] is not 2, 4, or 8 byte aligned)
When using an External X Server on PC palletes show correctly
Using Pi as the XServer the palette bug exists.

64 bit Raspbian OS:
Everything works except for the palette bug when using pi as the XServer
When using an External X Server on PC palettes show correctly.

[joamjoamjoam]

@SuperFromND

More progress updates on the 32 bit crashing when entering matches. I found a workaround for the Alignment trap by reading the array myself reallocating a slice and then dumping the resulting float32 in the stack where it belongs.

With this simple "fix" I am able to match the 64 bit OS functionality (Lucas Febatis repo) where you can play through matches and everything works as it should. The palette issue still exists as the only bug i can find so that's next on the todo list.

Maybe we can make a "Infection" Ikemen game so the palette issues become a feature lol.

Anyways ill port the "fix" in to the official windblade branch and test it there but since it was the same sigbus you were receiving this should fix that issue.

Fix for sigbus Alignment error on arm32

replace the line below from src/bytecode.go(line 898 ish or line 968 in WIndblade Repo) in Run() for OC_float case

sys.bcStack.PushF(*(*float32)(unsafe.Pointer(&be[i])))

to

arr := make([]byte, 4)
arr[0] = byte(be[i])
arr[1] = byte(be[i+1])
arr[2] = byte(be[i+2])
arr[3] = byte(be[i+3])
flo := Float32frombytes(arr)
sys.bcStack.PushF(flo)

Im off to compile the main fork be back later ...

Aaaand I'm back. Thank to your great tutorial i was able to compile the windblade for (which has a lot more stuff in btw) and confirmed that with the above "fix" I was able to get complete a few matches on the Retropie distro and had no crashes anywhere.

Note: The windblade branch was missing a function and an import for "encoding/binary":

func Float32frombytes(bytes []byte) float32 {
bits := binary.LittleEndian.Uint32(bytes)
return math.Float32frombits(bits)
}

Added a pull request for the windblade repo for this workaround. Ill leave the above explanation for history.
https://github.com/Windblade-GR01/Ikemen-GO/pull/319

[SuperFromND]

Great news, the PR above that joamjoamjoam submitted just got merged, and I can confirm it DOES compile! As you can see by this gameplay footage I recorded the palette issues still persist on Pi (According to joam's posts above, there's something in the Pi's Xserver that breaks it for whatever reason), but aside from that it's basically fully functional.

Fun side note: that weird input bug I mentioned earlier? Turns out that was just a fluke; my Bluetooth keyboard just doesn't play well with IKEMEN for whatever reason, and plugging in my usual USB keyboard worked perfectly fine (though my X360 pad still had a rotated D-pad by default, this can be easily fixed by just modifying config.json and all the other buttons work fine).

I guess it's time to start writing a scriptmodule then!

[SuperFromND]

Another update from me, I have managed to create an almost fully-functioning RetroPie scriptmodule for IKEMEN GO! Keyword there being almost, because while it can indeed download, compile and install IKEMEN GO, and while said build can be started, it hangs when trying to load.

There's a really odd quirk, though I'm not sure if it's the fault of IKEMEN or a consequence of xinit, but for whatever reason the engine fails to find LUA script files (that it needs) if you try to run it from anywhere other than the directory Ikemen_GO itself is installed in. So for example, if you ran IKEMEN GO from /foo/bar/ but it needs a file from/the/monkey/paw.png, it'll try to find the file at /foo/bar/paw.png! Thankfully this can be fixed with a very simple shellscript to manually change the directory to IKEMEN GO's and run that through XINIT: like so:

#!/bin/bash
cd /opt/retropie/ports/ikemen-go
MESA_GL_VERSION_OVERRIDE=4.3 ./Ikemen_GO

There's also something rather strange I encountered: when running IKEMEN GO from runcommand (making use of XINIT:, which is used in a few other scriptmodules like uqm and ags), it hangs on a black screen (assuming that the LUA issue mentioned above is solved already). It's not just refusing to run, as it will crash out if you have certain controllers plugged in when starting the engine up, but once it has started it just hangs indefinitely, leaving you with a black screen.

It's not just displaying to the wrong screen either; even grabbing a keyboard and spamming the Esc key to try and quit IKEMEN GO doesn't do anything, it's just flat-out frozen. There's actually been at least one other project that has gotten this black screen issue through XINIT:, though sadly the thread never elaborated on it nor provided a solution.

However, manually starting xinit and then running it... works perfectly fine! This seems to suggest that I might just need to tweak the launch command more, so perhaps someone more savvy and experienced with XINIT: related stuff in RetroPie could come and assist (paging @mitu perhaps?)

I should mention that there's a second way of running stuff that requires xinit in RetroPie, and that's using xinit -e 'command'. Unfortunately, trying that instead crashes due to xinit not having permission to access /dev/tty0, crashing before we even get a chance for IKEMEN GO to run. Now, there is a fix for this, and I confirmed that it DOES allow IKEMEN GO to run from runcommand.

The only problem is that the fix is this:

# a very, VERY bad idea, especially for a game with user-made content
ikemen-go = "sudo xinit -e '/opt/retropie/ports/ikemen-go/ikemen-go.sh'"
default = "ikemen-go"

For those not super savvy with how Linux works, sudo is essentially the Linux equivalent of running a program as an administrator in Windows, and is really only supposed to be used as a last resort, and not for general use like this.

I actually ran into this exact same conundrum back in 2018 while trying to get Flash and Java games running on RetroPie, and I did technically find a solution that didn't require sudo xinit. That solution was using a chmod command on Xorg to allow it to run from a script:

sudo chmod ug+s /usr/lib/xorg/Xorg

Of course, since as you can see this also makes use of the sudo command, it's not a safe or elegant solution to this problem either.

So to recap:

• Running IKEMEN GO manually works fine
• Running IKEMEN GO from XINIT: hangs at a black screen
• Running IKEMEN GO from xinit -e isnt possible without a huge security risk

Thankfully, aside from the palette issues joam described above, and the controller bug mentioned earlier in this thread that's planned to be remedied soon anyways, this is the last major issue that needs to be fixed before IKEMEN GO could be feasibly added to RetroPie. And given the circumstances and the fact that running source ports through XINIT: is clearly possible already, this could very well be ready for testing soon. We're in the endgame.

[joamjoamjoam]

@SuperFromND Nice work!! It’s really coming along now.

A small update in the palette corruption issue. I’ve narrowed it down to being one of 4 things:

1. A bug in the shaders that only shows on arm.
2. A bug in the v3D driver (Mesa) when drawing textures
3. A bug with the Go glfw pacakage or GLFW itself when running on the pi.
4. A bug in the Ikemen_GO source that’s is causing the textures drawn from the sprites/palettes to be messed up on the pi only.

I think one of the first 3 is most likely since a remote c server shows no issues and OpenGL 2.1 support for the pi is relatively new.

Things I’ve tried to no avail:

• Printing palettes being read from SFF files and looking for discrepancies from what’s is defined in fighter factory.

• using Mesa 20.3 v3D drivers for OpenGL for the pi.

We also would need to rewrite the shaders in openGLES 2 if we wanted to support other Pi devices as the pi4 is the only pi that can handle OpenGL 2.1.

[SuperFromND]

I found something that works with XINIT:! This is probably not the ideal way (I'm sure that either mitu or Jools will point out if there's a better way to handle it), but I found out that chaining the launch commands into xterm will cause IKEMEN GO to boot correctly from EmulationStation:

ikemen-go = "XINIT:/opt/retropie/ports/ikemen-go/ikemen-go.sh"
default = "ikemen-go"

#!/bin/bash
export MESA_GL_VERSION_OVERRIDE=2.1
xterm -g 320x240+0+0 -e 'cd /opt/retropie/ports/ikemen-go && ./Ikemen_GO'

So all that's left is for me to clean up this scriptmodule a tiny bit, maybe adding some symlinks to intergrate it a bit better with RetroPie's folder structure, and then we can have people test it!

[h2805270]

It will be pretty interesting to see a highly customizable fighting game engine be used on RetroPie for various fighting games.

Speaking of which, I haven't heard from the OpenBOR board in a couple of months. I wonder if they are still active...

[joamjoamjoam]

A little bit more info on the palette issue. The issue is definitely caused by the shaders. For some reason the OpenGL texture mapping for the 1d texture palette is not mapping correctly when running in the pi hardware. I verified that palettes being read from sff files match on both the pi and my windows PC.

I think the issue is related to the difference in texture precision on the two devices. Unfortunately I think this is as far as I can take it unless there’s someone on the Dev team who knows what these shaders are doing and are willing to play around with some of the texture types for the pi to get more precision.

Edit: we’ll nvm after about 3 days of no progress I went to document what I found and what line was causing it in case someone smarter than me wanted to look at it.

In render.go there’s a line in the fragment shader around render.go:70 that maps the pallet texture to the 2d sprite.

Line 70
Vec4 c = texture1D(pal, r*0.9961)

Simply tweaking the constant from .9961 to .9966 yielded the below results.

It stood out to me cause it had a hard coded constant by tweaking the constant by small amounts all the palettes lined up from the elecbyte logo to the characters in a match.

Also Ignore Gandalf's staff being transparent. That's just me being bad at editing sprites with Fighter Factory. All the characters I dint touch match exactly to how they play on Windows.

[SuperFromND]

@joamjoamjoam Nice work! Really interesting that a single constant value was all that it took to break (and now fix) palettes, kinda makes me wonder how exactly that bit of code came about in the first place. Once again, a massive thank you for your help!

Also, I just now finished my first draft of the scriptmodule:

#!/usr/bin/env bash

# This file is part of The RetroPie Project
#
# The RetroPie Project is the legal property of its developers, whose names are
# too numerous to list here. Please refer to the COPYRIGHT.md file distributed with this source.
#
# See the LICENSE.md file at the top-level directory of this distribution and
# at https://raw.githubusercontent.com/RetroPie/RetroPie-Setup/master/LICENSE.md
#

rp_module_id="ikemen-go"
rp_module_desc="I.K.E.M.E.N GO - Clone of M.U.G.E.N to the Go programming language"
rp_module_licence="MIT https://raw.githubusercontent.com/Windblade-GR01/Ikemen-GO/master/License.txt"
rp_module_help="Copy characters, stages, screenpacks, etc. to $romdir/ports/ikemen-go"
rp_module_section="exp"

function depends_ikemen-go() {
    getDepends golang-go libgl1-mesa-dev xinit xorg xorg-dev libopenal1 libopenal-dev libgtk-3-dev libasound2-dev freeglut3-dev
}

function sources_ikemen-go() {
    gitPullOrClone "$md_build" https://github.com/Windblade-GR01/Ikemen-GO.git
}

function build_ikemen-go() {
    go clean
    go mod tidy
    make TAGS='-tags al_cmpt' linux
    # grabs default screenpack and content required for the game to run; note that the screenpack has a CC-BY-NC 3.0 license
    make elecbyte
    md_ret_require="$md_build/Ikemen_GO"
}

function install_ikemen-go() {
    cp 'elecbyte/LICENCE.txt' 'ScreenpackLicense.txt'
    mkdir save sound

    md_ret_files=(
        'Ikemen_GO'
        'License.txt'
        'ScreenpackLicense.txt'
        'data'
        'save'
        'sound'
        'font'
        'external'
        'elecbyte/chars'
        'elecbyte/stages'
        'elecbyte/data'
        'elecbyte/font'
    )
}

function configure_ikemen-go() {
    mkRomDir "ports/ikemen-go"
    addPort "$md_id" "ikemen-go" "I.K.E.M.E.N GO" "XINIT:$md_inst/ikemen-go.sh"

    moveConfigDir "$md_inst/chars" "$romdir/ports/ikemen-go/chars"
    moveConfigDir "$md_inst/stages" "$romdir/ports/ikemen-go/stages"
    moveConfigDir "$md_inst/data" "$romdir/ports/ikemen-go/data"
    moveConfigDir "$md_inst/external" "$romdir/ports/ikemen-go/external"
    moveConfigDir "$md_inst/font" "$romdir/ports/ikemen-go/font"
    moveConfigDir "$md_inst/sound" "$romdir/ports/ikemen-go/sound"
    moveConfigDir "$md_inst/save" "$configdir/ports/ikemen-go"

    cat >"$md_inst/ikemen-go.sh" << _EOF_
#!/bin/bash
export MESA_GL_VERSION_OVERRIDE=2.1
xterm -g 1x1+0+0 -e 'cd /opt/retropie/ports/ikemen-go && ./Ikemen_GO'
_EOF_
    chmod +x "$md_inst/ikemen-go.sh"
    chown -R $user:$user "$md_inst"
}

As you can see there's still some weirdness that should be sorted out (specifically the wall of moveConfigDirs could probably be reduced, chown -R $user:$user "$md_inst" may be over-scoped, and make elecbyte probably should go in a game_data_ function), but this is still good enough to install IKEMEN GO in a way that works well with RetroPie's file structure.

If you know how to install a scriptmodule into RetroPie manually, this should be testable! Just in case you don't though, here's a super-quick rundown of the procedure:

• If you haven't already, enable SSH on RetroPie.
• Open up whatever SSH program you prefer (I use PuTTY) and log into your Pi.
• Navigate to /home/pi/RetroPie-Setup/scriptmodules/ports using the cd command.
• Start up a text editor with elevated priveleges using sudo nano ikemen-go.sh.
• Paste the contents of the scriptmodule above (in PuTTY, this can be accomplished by first copy-pasting the scriptmodule's contents in this post, and then simply right-clicking the PuTTY window), then press: Ctrl-X, then Y, then Enter / Return to save the file and exit nano.
• If done correctly, there should be a new file called ikemen-go.sh present (You can verify this by running ls ikemen-go.sh). You can now exit your SSH program.
• From here, you can access and run the scriptmodule like any other; by going into RetroPie Setup and going to "Manage Packages". IKEMEN GO will be under "Experimental".

Addendum: Just for funsies, I made a launching.png image in the style of the Pixel theme's launching images, themed after the default screenpack in IKEMEN:

[Troopaking]

@superfromndso I'm gonna test this soon.
Installing now . Would love to have side by with my mugen

[joamjoamjoam]

@SuperFromND

Yeah it had to do with hoe precise, or imprecise, floating point operation were on the pi vs x86. It wasn't all unselfish either lol I wanted some MUGEN on piCade.

I tried installing the screen pack but was greeted with a permission error on start up.

something about save/stats.json. the ports/ikemen-go folder was missing the save folder also. even after copying a working save folder from my dev branch i got the same error.

let me know if there anything you want me to try. feel free to reach out on discord too.

Also on an unrelated note, I saw your video on the discord and your sound was working perfectly. on my pi4 the sound is garbled and terrible. I'm glad its not a real issue and did you do anything special to fix it?

[SuperFromND]

@joamjoamjoam Ah, I see! The save/stats.json error happens whenever IKEMEN is unable to write to the save folder (this is also why the chown command is there).

I set it up so that IKEMEN GO symlinks the save folder to the /opt/retropie/configs/ports/ikemen-go directory since that's where configs typically go in RetroPie; it's possible that some write permissions might be preventing it on your side and I simply didn't realize this due to my permissions possibly being set up non-standard (I use a USB stick to store my ROM collections, and I achieved it by manually symlinking on RetroPie to point to it; I think I might've chmod -R 777'd my configs folder and forgot about it).

This could probably be fixed really easily; as in just changing it to redirect to the roms location instead. Not a huge loss!

# the line in question:
    moveConfigDir "$md_inst/save" "$configdir/ports/ikemen-go"

# the (very simple) fix:
    moveConfigDir "$md_inst/save" "$romdir/ports/ikemen-go/save"

As for the sound thing... I have no idea actually! It just worked flawlessly whenever I installed it, though it was noticeable quiet (I ended up manually boosting the audio volume, both in IKEMEN's config.json and in post using MAGIX Vegas).

[joamjoamjoam]

@superfromnd ah I see let me set the permission correctly in there and then I’ll try reinstalling the scripts with that change for the romdir.

The pi has a really bad sound system and it’s most notable in the volume outputted. If you get a usb sound card like this one on Amazon it makes it a lot better.

Sabrent USB External Stereo Sound Adapter:
Sabrent USB External Stereo Sound Adapter for Windows and Mac. Plug and Play No Drivers Needed. (AU-MMSA) https://www.amazon.com/dp/B00IRVQ0F8/ref=cm_sw_r_cp_api_glt_fabc_J3BVS30PKHX1RQX2MP17?_encoding=UTF8&psc=1

Heres the permission for the configs directory if your interested:

So a chown and chgrp to pi on the ikemen folder /opt/retropie/configs/ports worked perfectly and it matched what other ports were doing so I think adding in those will work a charm.

The audio issue is still there however so it might be an issue with my HDMI display and getting sound out of it. I see you were using composite audio out. I grabbed my bluetooth speaker and plugged it into the pi and voila perfect sound. Theres probably some HDMI audio issues with Alsa when using openAL or some configuration I might need to do.

So I think the three outstanding issues are

1. add a chown and chgrp to pi for ikemen config folder
2. add joystick support (i think we need to pipe DInput into Ikemen but im not sure how the joysticks work on the pi). Ill handle this one and see if i can get my fight stick up and running
3. Maybe add a basic config.json file for the pi since it defaults to being windowed 640x480. I had to manually set the fullscreen option to get it full screen for my 1080p display (which I think is unfortunately more common than CRTs these days.) We could use the opputunity to set the default audio volume a little higher for the pi too.

[SuperFromND]

@joamjoamjoam
The permissions thing could be sorted out really easily, something like this:

function configure_ikemen-go() {
    mkRomDir "ports/ikemen-go"
    addPort "$md_id" "ikemen-go" "I.K.E.M.E.N GO" "XINIT:$md_inst/ikemen-go.sh"

    moveConfigDir "$md_inst/chars" "$romdir/ports/ikemen-go/chars"
    moveConfigDir "$md_inst/stages" "$romdir/ports/ikemen-go/stages"
    moveConfigDir "$md_inst/data" "$romdir/ports/ikemen-go/data"
    moveConfigDir "$md_inst/external" "$romdir/ports/ikemen-go/external"
    moveConfigDir "$md_inst/font" "$romdir/ports/ikemen-go/font"
    moveConfigDir "$md_inst/sound" "$romdir/ports/ikemen-go/sound"
    moveConfigDir "$md_inst/save" "$configdir/ports/ikemen-go/save"

    cat >"$md_inst/ikemen-go.sh" << _EOF_
#!/bin/bash
export MESA_GL_VERSION_OVERRIDE=2.1
xterm -g 320x240+0+0 -e 'cd /opt/retropie/ports/ikemen-go && ./Ikemen_GO'
_EOF_
    chmod +x "$md_inst/ikemen-go.sh"
    chown -R $user:$user "$configdir/ports/ikemen-go/save"
}

I might have to tweak it a little bit (maybe using mkRomDir to create the folder with user-owner permissions instead of using a second chown command), and admittedly I haven't tested this fix yet, but that should do it, I think.

That's really interesting that you mentioned fullscreen; for whatever reason whenever I tried to set the fullscreen parameter in IKEMEN to true, it just crashes out entirely, no error log or anything. Maybe it's because I'm not using a window manager like matchbox? That might also explain why my IKEMEN window isn't centered when running on a CRT, resulting in accidental underscan.

I don't think a default config is really necessary here; a quiet volume is rather easy to remedy by the end user anyways, and adding a custom "default" config might cause issues down the road.

[Troopaking]

@superfromnd i just installed and got the json error as well. Permission denied ... I see you are working on a fix. Greatly appreciated
Would love to have this next to mugen .

[joamjoamjoam]

@superfromnd looks good . I think the chown needs to for the /opt/retropie/configs/ports/ikemen-GO folder to be safe. then since ikemen runs as the pi user anything it creates should have the right permissions.

About the default config i agree its better to not make assumptions on what people want I'm sure they can figure out how to use the ikemen settings. I would suggest that we set he fullscreen mode by default but it sounds like it may not work for everyone. I know that retroie has some built-in underscan/overscan options that might need to be applied.

Fullscreen does work for me using HDMI and booting it straight from Emulation Station. If you find anything else about this let me know and i can take a look in the code to see if we need to fix something there.

[joamjoamjoam]

@troopaking In case your wanting a quick fix until Super can get the scriptpack out all you need to do is

sudo chmod 666 /opt/retropie/configs/ports/ikemen-go
chown pi /opt/retropie/configs/ports/ikemen-go
chgrp pi /opt/retropie/configs/ports/ikemen-go
mkdir /opt/retropie/configs/ports/ikemen-go/save

[h2805270]

When I have some time, I can make a "IKEMEN GO Pi" logo if anyone wants it.

After all, this version is very specifically tweaked.