Development of module-script generator for lr-mess, lr-mame and mame standalone

bbilford83

@Folly said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

@bbilford83

About the joystick problem, I haven't added stuff yet.
Can you also try the cpc61 Zemmix MSX2 to see if that type has the same issue ?

OK, I will test it soon. The cpg-120 is a more powerful system, right? I guess that it still might have an issue the older one won't. I assume I need a different cpc-61 bios too.

Folly

@bbilford83 said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

@Folly said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

@bbilford83

About the joystick problem, I haven't added stuff yet.
Can you also try the cpc61 Zemmix MSX2 to see if that type has the same issue ?

OK, I will test it soon. The cpg-120 is a more powerful system, right? I guess that it still might have an issue the older one won't.

They are both MSX2.
Indeed, could be that the cpc61 doesn't have the issue.
I know that the cpg120 also has a yamaha ym2413 music chip.
Not sure about the cpc61 yet.

I assume I need a different cpc-61 bios too.

Yes

bbilford83

@Folly FYI I tested cpc61 and it works, same Zemmix load screen. In general everything is the same, except:

for some reason it makes the MSX1 version of 1941 work without you having to disable controller one. So that's good I guess. But Snake-It still requires you to do that on both systems. And the games I described not working above still don't work in the same ways.
I couldn't test the tetris MSX 1 version at the same time as I have the MSX 2 version in my system because they have the same filename. If you change the filenames it messes with mame, so I'm not sure how you could do this with both games in one system.

Folly

@bbilford83 said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

@Folly FYI I tested cpc61 and it works, same Zemmix load screen. In general everything is the same, except:

Thanks for testing !

for some reason it makes the MSX1 version of 1941 work without you having to disable controller one. So that's good I guess. But Snake-It still requires you to do that on both systems. And the games I described not working above still don't work in the same ways.

I am now testing it on Manjaro an Arch linux version using ArchyPie (the clone of RetroPie for Arch linux).
Seems I don't have this problem with 1942 on this environment.
Also with the latest tests I did on Debian11 with RetroPie also worked good with 1942.
So not sure if it's a mame issue or something else.
I had the problem earlier on in Debian11, perhaps updates resolved it.
Will test Snake-it later how it will react.
Don't mind trying to disable a joystick, will have a look if I can.

I couldn't test the tetris MSX 1 version at the same time as I have the MSX 2 version in my system because they have the same filename. If you change the filenames it messes with mame, so I'm not sure how you could do this with both games in one system.

In my script I added the option to "install the patched"/"restore to the origina"l runcommand.sh.
If you install the patched runcommand.sh and install the zemmix or whatever system again it will add "extra replace tokens" in the runcommands.
You can read the help of the option where you can install/restore it.
One replace token will add the softlist option to the runcommand when using the basename runcommand and forces to load the correct tetris.
In order to work you have to put the tetrises into the correct folder :
/roms/zemmix2/msx1_cart/tetris.zip
/roms/zemmix2/msx2_cart/tetris.zip

Edit 1 :
Found that the variable is not updated when doing both options installing the patched runcommand.sh and then directly install a zemmix system.
You have to exit the script, enter it again then install the zemmix.
Will have a look later to fix this issue.

Edit 2 :
Should be fixed now in 260.11.

Folly

@DTEAM

Can you look at my PR ?
Will try to add zemmix and zemmix2 later.

Folly

@bbilford83

Tested snakeit on my Manjaro linux.
Controls working ok on both cpc61 and cpg120.
I have to add that I have to use "space" to enter the game.
For msx2_cart/1942 I also have to use "space".
Though I recon that you don't see using the "space" key as an issue, or do you ?

Tested on Debian11 with the same result.
However both test where without connecting a joystick using the keyboard as joystick.
So now I can't move in msx2_cart/1942.
So the issue is still there.
Ejecting the first joystick worked for both cpc61 and cpg120.
Didn't test it again on Manjaro but I expect the same behaviour.

Found here how to eject the first joystick :
https://arcade.vastheman.com/minimaws/machine/cpc61
Entering - in the joystick setting revealed that we need to add :
-gen1 ""
-gen1 '' (with single quotes will also work)

Implemented it in the script version 260.10.

Edit :
Sorry, I had to remove it again in 260.12 as it doesn't work in lr-mess.

duglor

@duglor Because of the blocky basic nature of the games, i thought the speed of the paddles in blockbuster games would be helped by a lower resolution. So all of my 4 games are set to 640x480.

bbilford83

@Folly said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

Entering - in the joystick setting revealed that we need to add :
-gen1 ""
-gen1 '' (with single quotes will also work)

Implemented it in the script version 260.10.

Edit :
Sorry, I had to remove it again in 260.12 as it doesn't work in lr-mess.

Thank you for figuring it out and trying! I wonder if I edit that in manually into a new line of an identical emulator command in the emulators.cfg file if that would let me pick it and have it work? [Edit: it does not, that is probably what you mean that it was not working in lr-mess.]

Also thank you for the tips on how to get it to let two identical named games work, I will probably try to figure that out at least if there are other games like that. There's not much of a reason to have the first Tetris versus the upgraded one but since I am doing it for 1942 anyway I might want to.

FYI, I have been adding and testing all the MSX 2 cartridge games and a huge number of them do work properly. I am up through the G games and so far it is like close to 20 more games. I don't know if I will have the energy to do the MSX-1 list but I will at least update my game list when I am done with dispatch. And I will post if there are other games that require the joystick one to be disabled, so far to my surprise there have not been.

Edit: I found one more that is like Snake-It and still requires you to disable the first joystick to have the controls work: "Return of Jelda". It's an interesting "3D" shooter (like vector graphics but sort of isometric) that I think was an MSX2 exclusive. Also Korean-made, coincidentally I guess.

bbilford83

@duglor said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

@duglor Because of the blocky basic nature of the games, i thought the speed of the paddles in blockbuster games would be helped by a lower resolution. So all of my 4 games are set to 640x480.

Thank you! I will test this out later today. Funny enough I also use 640 times 480 within retroarch but my overall setting from the command line is still the larger one so I suspect that is what it is tracking to?

duglor

@bbilford83 Yeah the named .opt files for the 4 microvision games have resolutions set to 640x480. My default outside those 4 is 1920x1080.

bbilford83

@duglor said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

@bbilford83 Yeah the named .opt files for the 4 microvision games have resolutions set to 640x480. My default outside those 4 is 1920x1080.

Strangely for me when I change the resolution down to 640 x 480 in the runcommand menu the game doesn't boot, just puts me back in emulationstation. @Folly any idea why this would be?

Folly

@bbilford83

No, don't know.
I would not mess with the resolution setting, I think there is no need for that to do.
I don't see why you should make opt files.

I had a look at connect 4 on lr-mess, however I can't get it to drop and the because the resolution of the microvsn is so low we can't do anything in the mame gui.
Not sure if it is fixable.
(edit : fix in next post)

For the overlays, if you really want to get started with this then I advise another structure for the overlay config files.

For connect4 I made this (remember i am on 1600x900) :

custom_viewport_height = "614"
custom_viewport_width = "850"
custom_viewport_x = "553"
custom_viewport_y = "136"
input_overlay = "~/RetroPie/roms/microvsn/media/retroarch/overlays/microvsn/connect4.cfg"
aspect_ratio_index = "23"

You can see here that I moved the .png and .cfg files of @duglor to another directory.
Above config is not perfect as I can't actually see where the real lcd screen begins under the physical overlay in the picture.
So that is the difficult part.
Once we know that it should be easy for the next overlays.
(you can probably even skip the parts 1-6 and directly go to 7)
1 use gimp
2 scale your png to your resolution (doesn't need to be saved) (try to use 1920x1024 which is a good starting point if we somehow want to calculate it for other resolution)
3 go with the cursor to the places in the picture to find the custom_viewport x and y, they are obvious, the width and height need to be calculated though.
4 enter the values in the config file and call it connect4.zip.cfg and place it next to the rom.
5 when starting the game it will load the setting.
6 if it's not good then you can try and find the best values in the retroarch menu
and change them in the cfg file if it can't be saved somehow.

When using the structure like this we are able to share it together with the custom gamelists, if we would like that in the future.

7 Ok, now the fine-tuning perhaps even the method of not even having to use gimp .
Just go to the RetroArch UI and fully back.
Then you can select the core-options - > video -> scaling.
Here you will find the viewport settings.
Now you can change them and change them until it fits, go back and forth with the menu key F1.
The changes are not saved in the config file so you need to write them down and place them in the config file.
Now on the next boot you will have a working overlay.
This is my config after fine-tuning ( I also added the opacity 1 so you won't see the outer screen parts ) :

custom_viewport_height = "676"
custom_viewport_width = "910"
custom_viewport_x = "520"
custom_viewport_y = "104"
input_overlay_opacity = 1.000000
input_overlay = "~/RetroPie/roms/microvsn/media/retroarch/overlays/microvsn/connect4.cfg"
aspect_ratio_index = "23"

Now having this file you are able to convert it from 1600x900 to 1920x1024 with the equations I gave you earlier over here.
But then the other way around from 1600x900 to 1920x1024 instead of 1920x1024 to 1600x900.

Folly

@bbilford83

I discovered something.
I used your mame artwork with lr-mess to try and trick lr-mess to show the original mame ui and change check and change the input settings.
However by default that didn't work so I started messing in the RetroArch UI.
With next option enabled I had both working and speed was ok !
Now I could change the X key in the input section.
Seems when change "button 11" again using the X key the X key is seen as joystick1 A button. Then it works.
Seems the "alternate redering = on" option sticks in the core options.
So it works next time when running the game again.
Perhaps I have to set that core option to enabled in my script so it works by default.
What do you think, should I add it ?
(not sure, it could break other drivers, we need to test)

lr-mess_microvision_setting_for_displaying_artwork_and_ui.png

bbilford83

@Folly said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

@bbilford83

I discovered something.
I used your mame artwork with lr-mess to try and trick lr-mess to show the original mame ui and change check and change the input settings.
However by default that didn't work so I started messing in the RetroArch UI.
With next option enabled I had both working and speed was ok !
Now I could change the X key in the input section.
Seems when change "button 11" again using the X key the X key is seen as joystick1 A button. Then it works.
Seems the "alternate redering = on" option sticks in the core options.
So it works next time when running the game again.
Perhaps I have to set that core option to enabled in my script so it works by default.
What do you think, should I add it ?
(not sure, it could break other drivers, we need to test)

This looks great compared to mine, but I already had the alternate rendering set to on! Without it the mame menu is impossible to navigate (i.e. if you are at a normal resolution rather than super small). So I don't know why it fits for yours but not for mine. Do you still have the retroarch overlay on, with the scaling/viewport settings you showed in step 7 above? I assume no because I think the location is different in my art and the one duglor made, but I don't know why it would be scaling right for you but not for me.

Edit: I went back in and confirmed, with alternate rendering on this is still how it loads for me: alt text

bbilford83

@Folly, one more update on Zemmix. I have now tested the entire MSX 2 library to see which games work (though I didn't include the homebrew which are a ton of games). There are now a whopping 196 games in my gamelist. I will update the gamelist and art I uploaded soon but may jump into testing MSX 1 first. That will take a long time though, there are way more MSX 1 games.

As of now there are still three games that require you to manually disable joystick one to work: Return of Jelda, Snake-Z, and Yuurei-kun ("Mr. Ghost").

duglor

@Folly I drop by hitting the Central Return/Enter Key.

duglor

@bbilford83 nice

Folly

@bbilford83 said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

This looks great compared to mine, but I already had the alternate rendering set to on! Without it the mame menu is impossible to navigate (i.e. if you are at a normal resolution rather than super small).

Yes I have that on too.
I have implemented it in my script, here, so it doesn't have to be set in a manual way.

So I don't know why it fits for yours but not for mine.

I think you might have still the opt file which changes stuff for the overlay, remember.

It's your artwork not the overlay of @duglor you referring too.
It's not perfect but it comes quite near.
I changed my resolution to see if that made any difference.
But with mame artwork it should basically be the same no matter what resolution.
With 4:3 resolutions. however, some is cut off but the match should be still good.

Do you still have the retroarch overlay on, with the scaling/viewport settings you showed in step 7 above? I assume no because I think the location is different in my art and the one duglor made, but I don't know why it would be scaling right for you but not for me.

Your assumption is correct.
Nothing is on.
I don't set my overlay on in a manual way.
It will only load when there is a .zip.cfg file near the rom.
So the scaling and viewport settings aren't loaded too.

I renamed my overlay config file so it will not load.
Added your artwork in BIOS/mame/artwork.
Nothing else.

I think you are still loading your opt file, for your game, saved earlier on which probably contains some conflicting settings.
I would try to find that file, look into it, and rename or remove it and try it again.
You should be able to find your opt file in :
/opt/retropie/configs/all/retroarch/config/MAME

This is how it looks now with my overlay config and @duglor 's overlay picture, near perfect :-).

Folly

@bbilford83 said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

@Folly, one more update on Zemmix. I have now tested the entire MSX 2 library to see which games work (though I didn't include the homebrew which are a ton of games). There are now a whopping 196 games in my gamelist. I will update the gamelist and art I uploaded soon but may jump into testing MSX 1 first. That will take a long time though, there are way more MSX 1 games.

As of now there are still three games that require you to manually disable joystick one to work: Return of Jelda, Snake-Z, and Yuurei-kun ("Mr. Ghost").

If you can then I would recommend you to make a 0 rom-index 0 file next to the gamelist.xml file just like my script makes for other categories.
Here you can put all your roms in, so we have a list in the roms/zemmix2 folder to look at. You can also add the info about some games that require to disable the joystick. When you share the gamelist the 0 rom-index 0 file will also be copied. Think about it.

bbilford83

@Folly said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

I think you are still loading your opt file, for your game, saved earlier on which probably contains some conflicting settings.
I would try to find that file, look into it, and rename or remove it and try it again.
You should be able to find your opt file in :
/opt/retropie/configs/all/retroarch/config/MAME

Boy I was hoping that is all it was, as you were right that I did have an opt file saved for the game, but I deleted that file and it is still displaying the same. I checked the microvsn.opt file too and I don't see anything in it that should be causing problems. I even dug around in the config/microvsn/lr-mess configs thinking maybe something was wrong in there but basically those are only for button mapping and to remember which art is loading (and it says the same thing as the other games). I'll try to brainstorm more but you'd think there must be some reason other than the opt file that it's not displaying right for me...