Suggestions for ports #2

ExarKunIv

Here are the ports that @tpo1990 made.

I did have to edit the one for Blake stone

Return to Castle Wolfenstein

wget https://raw.githubusercontent.com/tpo1990/RTCW-RPI/master/rtcw.sh -P $HOME/RetroPie-Setup/scriptmodules/ports/

Doom Legacy source port

wget https://raw.githubusercontent.com/tpo1990/DoomLegacy-RPI/master/doomlegacy.sh -P $HOME/RetroPie-Setup/scriptmodules/ports/

Hexen 2 (uses SDL1, so best for the Pi3)

wget https://raw.githubusercontent.com/tpo1990/Hexen2-RPI/master/hexen2.sh -P $HOME/RetroPie-Setup/scriptmodules/ports/

Jazz Jackrabbit

wget https://raw.githubusercontent.com/tpo1990/JazzJackrabbit-RPI/master/openjazz.sh -P $HOME/RetroPie-Setup/scriptmodules/ports/

Caesar III

wget https://raw.githubusercontent.com/tpo1990/CaesarIII-RPI/master/julius.sh -P $HOME/RetroPie-Setup/scriptmodules/ports/

Blake stone

wget https://raw.githubusercontent.com/Exarkuniv/BlakeStone-RPI/master/bstone.sh -P $HOME/RetroPie-Setup/scriptmodules/ports/

ECWolf - Wolfenstein 3D engine

wget https://raw.githubusercontent.com/tpo1990/ECWolf-RPI/master/ecwolf.sh -P $HOME/RetroPie-Setup/scriptmodules/ports/

ecto

Hi,

I've tried your build sourceports nblood, pcexhumed and rednukem. Thank you for that. I had them installed by hand before, but this way is much easier. What I found out to be very interesting is that you completely disabeled opengl.
In conjuction with running these games with XINIT I was able to achieve fullHD without slowdowns. That's quite impressive! Before I was using opengl (and the polymost renderer) but I only achieved a fluent gameplay at a resolution of 1280x720. Interestingly without XINITthe games a a lot slower... strange...

I had some problems, because of the ingame fullscreen setting. If it's enabeled, the mouse and keyboard don't respond anymore. It's a known problem with retropie and xinit, but I had forgotten that...
I'll try some other settings soon. Like enabeling opengl and disabeling polymost. I'd like to see the difference in rendereing up close. But it's probably not needed.

I have a couple of questions though:

How do you enable the other episodes (cryptic passage, suckin' grits on route 66 and ...rides again)? I have a separate ports folder in /opt/retropie/ports with an altered emulators.cfg. I guess there might be a nicer way...
Can I change any settings for pcexhumed? I was not able to find that ingame...
Will you port over Shadow Warrior, too? I have it running, but I also did that by hand.

Anyways, thanks for your scripts, they are a great addition to retropie, I think!

ExarKunIv

@ecto thanks for giving them a try. :)

has for your questions. opengl is for some reason that there would be a odd color effect going on in the menu but in game looks fine (very odd), so i have it off so it look good right out of the box.

UPDATE: so i did mess with it again with USE_OPENGL=1 POLYMER=0and it failed to complie. so Polymer needs to be on for it to work. you can play around with opengl. as i said the menu as a off color but the game it self looks fine from the little i have played

yes the fullscreen is a issue for xinit. that is why for these three games i have a config file get pulled down to change that so the mouse and keyboard will work. supposedly it is a issue with the SDL version we have on this OS. the guys on OpenMW where talking about it and it might of been fixed with a new SDL version.

I will add a comment about that so people know

Yes the other episodes will be worked on soon. i did try cryptic passage but i did not get it to work. so i need to mess with it more

sadly there are no setting that you can change for pcexhumed ingame there is a config file in .config/pcexhumed that you can play with

Yes i have a script for Shadow Warrior, plus like 26 others. i will be posting soon. im doing one last check and test to make sure they are good

any thoughts and questions im open too, thanks again for trying them

ecto

@exarkuniv So I compiled nblood/rednukem and pcexhumed again with opengl support on and now I can choose which renderer I like. Opengl looks a bit better and is acutually almost on par with the software renderer except for redneck, which is clearly faster in software mode. But as you said, the into movies have strange colors. Interestingly the blood ingame movie looks ok. Strange.

Today I tried OpenRCT2 and your script also workling very well. I have fullscreen and window mode set to 1980x1080and the ingame scaler to 2x, so it's running in widescreen resolution with good performance (around 40-50 fps in the intro)

Another thing which might be important for your scripts: there is a SDL2 port of Hexen2. I don't know which repo you're based on, but it's a thing to consider as SDL1 does not work well for Rpi4 with full KMS.

Thanks again for the scrips. They're much appreciated!

ExarKunIv

@ecto thanks for the update. for most people ill just leave them as is so there are no weird colors.

as for hexen 2 i did not know that. ill take a look. the script i posted was from @tpo1990, and other then the Blake stone one i did not touch them since they seemed to work.

but now i will dive it to it and see what i can find.

i will be posting another batch of scripts soon

ExarKunIv

Hexen 2 port - With SDL 2 and GL support (i think)

wget https://raw.githubusercontent.com/Exarkuniv/Hexen2-RPI/master/hexen2.sh -P $HOME/RetroPie-Setup/scriptmodules/ports/

Thanks to @ecto for point the SDL2 version

Cesarpuig

@ExarKunIv Hello, this is the code that I use to install Half-Life, Half-Life: Blue Shift and Half-Life: Opposing Force. I think it can be useful. It is based on the one from @zerojay.

I have only tested it on RPI4, with Rasbian OS Buster updated, and the latest version of Retropie. I think it needs modifications if it is to be used in another RPI other than 4, since the output files will have different names as they are different architectures.

#!/usr/bin/env bash

# This file is part of The RetroPie Project
# 
# The RetroPie Project is the legal property of its developers, whose names are
# too numerous to list here. Please refer to the COPYRIGHT.md file distributed with this source.
# 
# See the LICENSE.md file at the top-level directory of this distribution and 
# at https://raw.githubusercontent.com/RetroPie/RetroPie-Setup/master/LICENSE.md
#

rp_module_id="xash3d-fwgs"
rp_module_desc="xash3d-fwgs - Half-Life Engine Port"
rp_module_help="Please add your full version Half-Life data files (folders /valve, /bshift and /gearbox) to $romdir/ports/xash3d-fwgs/ to play."
rp_module_section="exp"
rp_module_flags="!mali !x86"

function depends_xash3d-fwgs() {
    getDepends libsdl2-dev libfontconfig1-dev libfreetype6-dev
}

function sources_xash3d-fwgs() {
    gitPullOrClone "$md_build/$md_id" https://github.com/FWGS/xash3d-fwgs.git
    gitPullOrClone "$md_build/hlsdk" https://github.com/FWGS/hlsdk-xash3d.git
    gitPullOrClone "$md_build/bshiftsdk" https://github.com/FWGS/hlsdk-xash3d.git "bshift"
    gitPullOrClone "$md_build/opforsdk" https://github.com/FWGS/hlsdk-xash3d.git "opfor"
}

function build_xash3d-fwgs() {
    cd "$md_build/$md_id"
    ./waf configure -T release
    ./waf build
    cd "$md_build/hlsdk"
    ./waf configure -T release
    ./waf build
    cd "$md_build/bshiftsdk"
    ./waf configure -T release
    ./waf build
    cd "$md_build/opforsdk"
    ./waf configure -T release
    ./waf build
    md_ret_require=(
        "$md_build/$md_id/build/game_launch/xash3d"
        "$md_build/$md_id/build/engine/libxash.so"
        "$md_build/$md_id/build/mainui/libmenu.so"
        "$md_build/$md_id/build/ref_soft/libref_soft.so"
        "$md_build/$md_id/build/ref_gl/libref_gl.so"
    )
}

function install_xash3d-fwgs() {
    md_ret_files=(
        "$md_id/build/game_launch/xash3d"
        "$md_id/build/engine/libxash.so"
        "$md_id/build/mainui/libmenu.so"
        "$md_id/build/ref_soft/libref_soft.so"
        "$md_id/build/ref_gl/libref_gl.so"
    )

}

function configure_xash3d-fwgs() {
    mkRomDir "ports/$md_id/valve"
    mkdir "$romdir/ports/$md_id/valve/cl_dlls"
    mkdir "$romdir/ports/$md_id/valve/dlls"
    mkdir -p "$romdir/ports/$md_id/bshift/cl_dlls"
    mkdir -p "$romdir/ports/$md_id/bshift/dlls"
    mkdir -p "$romdir/ports/$md_id/gearbox/cl_dlls"
    mkdir -p "$romdir/ports/$md_id/gearbox/dlls"
	moveConfigDir "$md_inst/valve" "$romdir/ports/$md_id/valve"
	moveConfigDir "$md_inst/bshift" "$romdir/ports/$md_id/bshift"
	moveConfigDir "$md_inst/gearbox" "$romdir/ports/$md_id/gearbox"
    cp "$md_build/hlsdk/build/cl_dll/client_armv8_32hf.so" "$romdir/ports/$md_id/valve/cl_dlls/client.so"
    cp "$md_build/hlsdk/build/dlls/hl_armv8_32hf.so" "$romdir/ports/$md_id/valve/dlls/hl.so"
    cp "$md_build/bshiftsdk/build/cl_dll/client_armv8_32hf.so" "$romdir/ports/$md_id/bshift/cl_dlls/client.so"
    cp "$md_build/bshiftsdk/build/dlls/bshift_armv8_32hf.so" "$romdir/ports/$md_id/bshift/dlls/hl.so"
    cp "$md_build/opforsdk/build/cl_dll/client_armv8_32hf.so" "$romdir/ports/$md_id/gearbox/cl_dlls/client.so"
    cp "$md_build/opforsdk/build/dlls/opfor_armv8_32hf.so" "$romdir/ports/$md_id/gearbox/dlls/hl.so"
    download "https://github.com/FWGS/xash-extras/releases/download/v0.19.2/extras.pak" "$romdir/ports/$md_id/valve"
	chown -R $user:$user "$romdir/ports/$md_id/"

    addPort "$md_id" "xash3d-fwgs" "Half-Life" "pushd $romdir/ports/$md_id/; LD_LIBRARY_PATH=$md_inst $md_inst/xash3d -game %ROM% -clientlib cl_dlls/client.so -dll dlls/hl.so; popd" "valve"
	addPort "$md_id" "xash3d-fwgs" "Half-Life - Blue Shift" "pushd $romdir/ports/$md_id/; LD_LIBRARY_PATH=$md_inst $md_inst/xash3d -game %ROM% -clientlib cl_dlls/client.so -dll dlls/hl.so; popd" "bshift"
	addPort "$md_id" "xash3d-fwgs" "Half-Life - Opposing Force" "pushd $romdir/ports/$md_id/; LD_LIBRARY_PATH=$md_inst $md_inst/xash3d -game %ROM% -clientlib cl_dlls/client.so -dll dlls/hl.so; popd" "gearbox"
}

Once installed it is only necessary to copy the files of each of the games in their respective folders

/roms/ports/xash3d-fwgs/valve
/roms/ports/xash3d-fwgs/bshift
/roms/ports/xash3d-fwgs/gearbox

I run it at a resolution of 1024x768, I modify them in the video.cfg file, which is created after the first start

I also modify the config.cfg file as follows:

r_vbo "0"
r_vbo_dlightmode "1"
cl_lw "0"

If you want to read more about these settings you can do it here https://github.com/FWGS/xash3d/issues/349

Greetings

ExarKunIv

@cesarpuig very cool.
i will compare it to the one i have and change it if needed with what you posted.

thanks for sharing

ExarKunIv

Devilutionx - Port of Diablo 1( got it working again )

wget https://raw.githubusercontent.com/Exarkuniv/Devilutionx-RPI/Master/devilutionx.sh -P $HOME/RetroPie-Setup/scriptmodules/ports/

Cytadela port

wget https://raw.githubusercontent.com/Exarkuniv/Cytadela-RPI/Master/cytadela.sh -P $HOME/RetroPie-Setup/scriptmodules/ports/

Augustus - enhanced port of Caesar 3

wget https://raw.githubusercontent.com/Exarkuniv/Augustus-RPI/Master/augustus.sh -P $HOME/RetroPie-Setup/scriptmodules/ports/

ecto

@exarkuniv Hi again, I tried your devilutionx script. Thanks for that, too!

There's a new 1.3.0 release with many new features and fixes that you could use in your script. :D (I tried to change it by hand. But there are some differences how the binary is distibuted, and I hadn't had enough time to go through all)

Keep up to good work!

ExarKunIv

@ecto thanks again
i think i might of tryied 1.3.0. but i cant remember. but i will make a note to go back and give it a try and any other updates the anyone has or finds.

i will get a few new ones posted in the next day or so.

ExarKunIv

Here's a few more for you all

Doom 3

wget https://raw.githubusercontent.com/Exarkuniv/Doom-3-RPI/Master/dhewm3.sh -P $HOME/RetroPie-Setup/scriptmodules/ports/

Dune Dynasty

wget https://raw.githubusercontent.com/Exarkuniv/dunedynasty-RPI/Master/dunedynasty.sh -P $HOME/RetroPie-Setup/scriptmodules/ports/

Dune Legacy

wget https://raw.githubusercontent.com/Exarkuniv/DuneLegacy-RPI/Master/dunelegacy.sh -P $HOME/RetroPie-Setup/scriptmodules/ports/

ExarKunIv

Here's a couple more.

Dave Gnukem

wget https://raw.githubusercontent.com/Exarkuniv/Dave-Gnukem-RPI/Master/gnukem.sh -P $HOME/RetroPie-Setup/scriptmodules/ports/

GL version of Hexen2 for Pi4

wget https://raw.githubusercontent.com/Exarkuniv/Hexen2-GL-RPi/Master/hexen2.sh -P $HOME/RetroPie-Setup/scriptmodules/ports/

Hheretic for the Pi4 GL version (i think)

wget https://raw.githubusercontent.com/Exarkuniv/Hheretic-RPi/Master/hheretic.sh -P $HOME/RetroPie-Setup/scriptmodules/ports/

Hhexen port GL version ( i think )

wget https://raw.githubusercontent.com/Exarkuniv/Hhexen-RPi/Master/hhexen.sh -P $HOME/RetroPie-Setup/scriptmodules/ports/

ExarKunIv

Here's some more

Again if anyone has suggestions or there are any issues. Please let me know

Open RA

wget https://raw.githubusercontent.com/Exarkuniv/OpenCC-RPi/Master/opencc.sh -P $HOME/RetroPie-Setup/scriptmodules/ports/

OpenJK: Jedi Academy

wget https://raw.githubusercontent.com/Exarkuniv/OpenJK-JA-RPi/Master/openjk_ja.sh -P $HOME/RetroPie-Setup/scriptmodules/ports/

OpenJK Jedi Outcast

wget https://raw.githubusercontent.com/Exarkuniv/Openjk-jo-RPi/Master/openjk_jo.sh -P $HOME/RetroPie-Setup/scriptmodules/ports/

ExarKunIv

Here is a script made by @sleve_mcdichael it is a GMLoader engine it is to run GameMaker Studio games for Android

i can say it does AM2R works quite well

GMLoader

wget https://raw.githubusercontent.com/s1eve-mcdichae1/GMLoader-RPi/main/gmloader.sh -P $HOME/RetroPie-Setup/scriptmodules/ports/

Philcomm

@exarkuniv hey, my music script made it on the list!

First, yes, my script still works, and it is constantly updated. I just made a huge rewrite in another language, which hopefully results in less workload, especially for something like the Pi Zero where all performance increases matter.

Second, if you want, you can in addition directly link the github page: https://github.com/OfficialPhilcomm/retropie-music, which has installation instructions.

Of course I am always open to suggestions when it comes to improvements and new features.

ExarKunIv

@philcomm i have added a link to your github.

Philcomm

@exarkuniv I saw it, thank you :D

And thanks for keeping this updated, this is a cool post, I have it linked in my personal "guide to retropie"

Philcomm

@exarkuniv I was thinking for a long time to make an Ultimate guide to RetroPie, which includes stuff like additional packages, setup/configuration to make RetroPie as clean of a setup as for example a playstation, background music, and so on.

I have something like this for me privately, but not public. Would you be interested in creating such a document together?

ExarKunIv

@philcomm thanks for linking my post.

ill take all the help to get more people to find this. :)

Sure i would love to make something with you
I was thinking something along the same line. this post was kinda a start for it.

there is so much good stuff out there and alot of it get lost in the forum