DragonRise Inc. Generic USB Joystick (121/6)

[devi01]

Hi to everyone
Someone help me please and sorry for my english.
When i start every games happen this error and i can’t move anything.
“DragonRise Inc. Generic USB Joystick (121/6) not configured”

Thanks to all

[IanDaemon]

@devi01 That's a generic error saying that you didn't configure the controller. Did you map the controls in RetroPie?
https://retropie.org.uk/docs/Controller-Configuration/

[devi01]

@IanDaemon i tried everything even the method:
/opt/retropie/configs/all/retroarch/autoconfig/DragonRise inc. Generic USB Joystick.cfg:

input_vendor_id = "121"
input_product_id = "6"

Is so strange….now after add the line up the message is:
Configured port 1 but nothing working, no buttons, no joystic

[Floob]

This post is deleted!

[devi01]

@devi01 said in DragonRise Inc. Generic USB Joystick (121/6):

@IanDaemon i tried everything even the method:
/opt/retropie/configs/all/retroarch/autoconfig/DragonRise inc. Generic USB Joystick.cfg:

input_vendor_id = "121"
input_product_id = "6"

Is so strange….now after add the line up the message is:
Configured port 1 but nothing working, no buttons, no joystic

Solved…..no memory inside.

[LuigiPuzo]

Hello Thank you for the information.
It was useful for me as well.

Please allow me to add:

How to find out the Vendor ID and Product ID
It is briefly displayed along the info message on the bottom left hand side of the screen:

With lsusb we can see in Hexa the values
Bus 001 Device 014: ID 045e:0b12 Microsoft Corp. Xbox Wireless Controller (model 1914)
Changing the controller does not change the ID.
However, changing the controller for a generic controller changes the ID:
Bus 001 Device 016: ID 045e:028e Microsoft Corp. Xbox360 Controller
Hence causing this to happen AGAIN, which is annoying.
We have to manually edit the config file again.

One thing that bothered me is that in all know previous versions of Retropie this was not an issue and now it's presenting one new, more issue than the previous version.
I've used Retropie for years now and I have never had this issue.
The only "new things" I have are

• Operating System [Ubuntu 22.04 LTS freshly installed];
• THIS Specific controller (Tested and proven to be working in all other games, also the old controller presented the same issue);
• USB Cable (Tested and proven to be working on other games, and able to "quickly charge" a Phone and perform fast data transfers)

Please let me ask:

• Is there any way I can make it Automatic when I change controller to change the configuration.
  -- Bear In mind I did the controller configuration at the start of Retropie every time I change the controller, and I tested quite a handful of times, I went as far as deleting , removing configuration files, and recompiling Retropie from the source 3 or 4 times.

• Would there be any test you'd like me to perform?
  -- I may test it again on another Ubuntu version (or Ubuntu based distribution);
  -- I don't discard the possibility to install it on a different Linux Distribution;

Thank you very Much.