Parts needed to get started with Powerblock on Raspberry Pi 4 model B
-
I'm a Raspberry Pi beginner and I've been looking for something just like your Powerblock! I'm about to order from the Pi Hut but I would appreciate your help. Can you please tell me exactly what I need in order to have an illuminated button or switch connected to the Powerblock? For example, would either of these two illuminated buttons work with it?
https://tinyurl.com/bdpx6c7n
https://tinyurl.com/ye8kph8kIf so, do I need any specific wires or resistors to connect them safely to the block?
-
I know this is a pretty old post, but I am at least now, so that it can be of any help in the future:
The buttons should work with the PowerBlock! Also the PowerBlock already comes with a resistor on the LED signal line so that you should be able to directly connect the LED pins with the corresponding LED pins of the button.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.