Fairchild Channel F

OneSwitch

@mitu Thanks, I'll look into that. After 24hr trying to compile lr-mess, I think I'm going to pull the plug on that approach.

edmaul69

@oneswitch pulling the plug can leave you with a bunch of excess files.try to keep your old advmess.rc config file if you can. the new configs are a much bigger pain in the butt with the changes they made with the controller settings, but if you use your old config it will auto convert it to the new settings.

OneSwitch

Thanks. I've managed to get it working again. Very pleased. My only slight issue is that I can't get 4:3 ratio on a 16:9 monitor. The AdvanceMESS 3.8 Video settings don't seem to allow me to achieve this. Strange as I managed before. No RetroArch settings to play with either.

mediamogul

@oneswitch said in Fairchild Channel F:

The AdvanceMESS 3.8 Video settings don't seem to allow me to achieve this.

If you haven't already, try setting display_expand 1.25 to display_expand 1.0 in your advmess.rc config file. At some point the lead developer decided to expand the screen abnormally wide by default to "better fit widescreen displays".

edmaul69

@mediamogul i hate a lot of the changes made. Most annoying was that they separated multiple keyboards and controllers by some code they get. So i had to configure all 3 keybards. And i prefer setting up my controllers by joystick 0, 1, 2.... not by some code number it generates for each controller.

mediamogul

@edmaul69 said in Fairchild Channel F:

So i had to configure all 3 keybards.

That one almost had me running for the hills, but @caver01 showed me that by setting device_keyboard raw, any attached keyboards will read as being one and only require one entry per setting.

And i prefer setting up my controllers by joystick 0, 1, 2.... not by some code number it generates for each controller.

I'm not familiar with the newer code number scheme, but that may have been introduced to counteract the js numbers shifting at the system level between sessions. To avoid that myself a while back, I ended up key-mapping my controllers and using the raw keyboard setting above. Sometimes MAME and AdvanceMAME almost seem too smart for their own good. In trying to be all things to all people, some settings are arguably a bit convoluted and can even get in the way of others.

OneSwitch

@mediamogul said in Fairchild Channel F:

display_expand 1.25

Champion. That did the trick. Many thanks.

edmaul69

@mediamogul so here is the issue with the controllers on advmess with the new coding; so two identical controllers can get the same code and then they act as the same controller. In the advmame emulator i posted it was fixed at least for intellivision. Cant remember beyond that. You can set up 2 players and they both work correctly. But when you go back in, it only saved settings for one controller and both identical controllers worked as the same controller. You have to go into setup every time and configure the controllers each time you wanted to play.

mediamogul

@edmaul69

Yikes... That's rough. Hopefully that'll get ironed out if it hasn't already.

edmaul69

@mediamogul yeah i havent tried the newest versions out yet to see if they did or not.

robtedes123

Anybody know how to get this working on the newest version of retropie?

mediamogul

@robtedes123 said in Fairchild Channel F:

Anybody know how to get this working on the newest version of retropie?

There shouldn't be any change in method. I'm on 4.4.3 and everything's working well. What problems are you experiencing?

robtedes123

@mediamogul After I do everything , including giving permissions. The menu just simply doesn't show up in emulationstation, after restarting emulation station. I've tried putting the roms under /opt/retropie/configs/mame-adv-mame/image/ and /home/pi/retropie/roms/channelf, and setting the paths accordingly under /home/pi/.emulationstation es_systems.cfg, but no dice

mediamogul

@robtedes123

Post the contents of your /home/pi/.emulationstation/es_log.txt to pastebin.com and let's see if anything stands out.

robtedes123

@mediamogul https://pastebin.com/uU0y12C7 has the relevant two lines in the log.

mediamogul

@robtedes123

OK, now let's see your /home/pi/.emulationstation/es_systems.cfg

robtedes123

@mediamogul https://pastebin.com/JiWW6WFN

edmaul69

@robtedes123 you either need to unzip your roms or add .zip .ZIP to the <extension> part of the channel f section.

robtedes123

@edmaul69 yup that was it thanks!

robtedes123

@edmaul69 Is my emulators.cfg right?:

mess="/opt/retropie/emulators/advmame/bin/advmess channelf -cart %ROM%"
mess2="/opt/retropie/emulators/advmame/bin/advmess channelf"
default="mess"

Do I need a bios? None of the roms will launch