8bitdo not detected on emulationstation

ThatClassyGaz

@KZL I had a very similar issue with my 8BitDo FC30 Pro, the mapping buttons in Emulation Station wasn't carrying over to PicoDrive (or at least thats what I suspect). I downloaded a pre-done config file for it and dropped it into the /Config/all/Retro-arch controller directory and that seemed to fix the issue.

Worth mentioning that firmware plays a much bigger issue than I thought, and having the most up to date wasn't the best idea in my case.

Sorry I can't give exact advice but hopefully you've got somewhere to start from

KZL

Hello TCG,

I saw the thread about your 8bitdo issues. I was wondering if your could tell me from where you got your retroarch configuration ?

Cheers

Floob

The Wiki has steps for Jessie though?
The main manual step being editing a file to identify the controller to EmulationStation.

You can find controller files here, although you are better off letting ES create them as that would include hotkeys.
https://github.com/libretro/retroarch-joypad-autoconfig/tree/master/udev

KZL

Hello,

Yes indeed it's strangely sorted by there is some steps which are working for Jessie.
Otherwise, I managed to identify the controller though EmulationStation.

But I get a lot of difficulties about my understanding of the mapping. There are :

emulationstation configuration es_input.cfg
~/.emulationstation/es_temporaryinput.cfg ,
retroarch general config retroarch.cfg with player1_input commands
retroarch-joypads/8Bitdo.cfg pad configuration
..

I don't get why if my emulationstation is working, retroarch is not configured since it is autoconfigured when I'm using a 2 axis gamepad.

Btw, I saw there is 2 configurations for 8Bitdo.. Could you tell me the difference between 8Bitdo NES30 Pro and 8Bitdo NES30 Pro Joypad.

Floob

Bear in mind ES and Retroarch do not use the same controller file. es_input.cfg is for ES only.
The files for emulators using Retroarch are in the /opt/retropie/configs/all/retroarch-joypads/ directory.

The difference between the two files you mention is likely the controller start-up, for example, if you turn it on whilst holding the right shoulder it will most likely report as NES30 Pro Joypad. Its important to make sure when you create your manual 10-local.rules file to have the controller name correct.

KZL

My configuration file /etc/udev/rules.d/10-local.rules contain a bunch of entries
# 8Bitdo NES30 Pro GamePad Bluetooth mode(POWER)
SUBSYSTEM=="input", ATTRS{name}=="8Bitdo NES30 Pro", MODE="0666", ENV{ID_INPUT_JOYSTICK}="1"

# 8Bitdo NES30 Pro GamePad Bluetooth mode(POWER+R1)
SUBSYSTEM=="input", ATTRS{name}=="8Bitdo NES30 Pro Joystick", MODE="0666", ENV{ID_INPUT_JOYSTICK}="1"
That line allow me to use emulationstation. I'm still in trouble with retroarch. It seems that I have to put manually the configuration, although my 2-axis pad was working by itself after configuration though the emulationstation.

Btw, how I'm suppose to link the ATTRS{name}=="8Bitdo NES30 Pro Joystick" to the /opt/retropie/configs/all/retroarch-joypads/ directory, and especially with the file refereing to my gamepad : ./8Bitdo-NES30-Pro-GamePad-Bluetooth-Mode(POWER).cfg

KZL

Hello,

I confier that my configuration is not loaders. Well, I played with the configuration onscreen using a keyb connected to my rpi. I configured my 8bitdo and was able to move In the nav of RetroPie > RetroArch.
Nevertheless after configuring RetroArch the bitdo was still not detected as written in yellow at the bottom when I connect my controller
Would you help me to do? I think i'm really close.. Do I forgot something ? :)

KZL

HEllo,

I succeeded to configure the controller though Megadrive. Actually the NES is not mapping correctly. And some button seems to be mixed. I figure out if sometimes the autoconfig is not loading or if there is a confusion betweek NES30 and NES30 Pro..

Btw I changed the driver and I use now sdl. Since this I got difficulties to configure hotkey. I'm still investigating..

KZL

I kept continue trying to configure my controller.
I noticed that there is a mix between players.

On one hand I connected a Logitech keyboard. On the other hand my bluetooth controller is off but already paired.

My keyboard is automatically detected. Then I went into the Retroarch configuration menu (in emulationstation>retropie) in order to change the input configuration of my bluetooth adapter.
When I turn on my bluetooth controller, it is automatically assigned as port #0 and my keyboard is not detected anymore or at least some button are remapped.
I guess there is a conflict between keyboard and controller. I hope it will be corrected..

Since this I disabled the Autoconf mode which seems to be bugged, it's working well..
I haven't notice any trouble with EmulationStation no conflict between controllers.

KZL

Ok actually I noticed much more than that. It's not a conflict.
Retroarch try to distinguish keyboard and joypad !!

So when you are configurating the User 1 Binds list, there is subtlety..
(Retroarch interface; Settings/Input/Input User 1 Binds)

If you turned on "Remap binds enable" and you connect you controller, it will remap everything and your keyboard can be wrongly remapped. I don't know why.
So I turned off that one..
Then if you configure buttons with 2 controllers connected (1 joypad + 1 keyboard), try to rebin for example the B button with the joypad. For example configure the B button of the joypad, the window disappear and when you want go to the next button to remap using the keyboard it will remap the B button for the keyboard with the down button of the keyboard (If you went down with the arrow) and keep the mapping of the B button for the joypad.
It really seems to be a mess to map buttons the interface doesn't seems to work correctly.

Right now it's working if I take into account this informations, but definitely not easy to do when you don't know.

Dimsky

Hello,

I'm new on this forum.
I have a problem with my raspberry pi. I emulationstation used for the emulator to install everything works summit. the roms also only work my 8bitdo gamepad works well in the menu but not when I boot ROM game. he no longer reacts. I connected it via bluetooth and works fine. but as I pointed out when I start the ROM.
ps I did not know much about the software. I hope someone can help me with a simple solution.
Thanks for the effort.

Floob

@Dimsky Please post a new topic with your issue and read this first so others can help you as much as possible:
https://retropie.org.uk/forum/topic/3/read-this-first

stahl80

I just did a clean install of Retropie 4.4. I am using two NES30 PRO controllers.
One of the controllers connect using the Retropie setup script, but only one the second will never connect?
So using one controller when booting it won't auto connect during boot as it did in previous version of retropie without issue.
I tried changing the BT settings to boot and background but nothing. So i go back to BT setting to connect all know devices and it connects right away.
From there i start ES (because botting without the controller connecting during boot ES won't find it) and now i can mapp the buttons in ES.

So two things

How to get the controller to auto connect during boot (that in previous retropie systems worked fine!) ?
Why can't i connects a second controller anymore (that in previous retropie systems worked fine!) ?

All new retropie image, 8bitdo controllers updated to latest firmware!
Should i just ue one of my old backups of retropie 3.x.x something or is it possible to use 4.4?

BuZz

@stahl80 see the post above yours. Open a new topic and provide requested info.