Atari 5200: New version of Atari800 (Beta): two triggers (Moon Patrol!!!), hat start and exit buttons

EvilDindon

Ok, thanks future.child for links. Will try it later.

cloudlink

@future-child thank you! This works great!

hansolo77

I've still not messed much with Atari 5200/800 stuff. I was waiting to see what the results were with lr-atari800, and this kat5200 emulator. Has anybody got any recommendations/suggestions? Is the LibRetro core the way to go, or is this one, with all the mods, fully up and running? I'm sure a future addon to the LibRetro core will be the eventuality of cheevos, so I'm leaning towards that. But I've not bothered installing anything as yet.

mediamogul

@hansolo77

There's always the original Atari800 emulator as well. Once it's set up, it'll run the largest portion of the Atari 8-bit library. it'll also emulate all the various control schemes unique to the system that are missing in most other emulators.

jamesnj

@hansolo77 see my recent thread here

I don't know yet if kat5200 solves all 5200 emulation desired, but so far it seem to work well for me. My last comment sums up most of the thread.

hansolo77

@jamesnj
Thanks , I'll give it a go when I have some free time!

Used2BeRX

@future-child Hey bud,

I'm running a completely new RetroPie 4.4 build on my Pi Zero so I can make an image for my brother sometime in the next week or two.

Nothing we did in the past here works anymore. :(

Did anything change with the install files here or with RetroPie 4.4 that would change anything? Every game I try to launch with all of the configuration files I had put together just fades to black and then kicks you back to the romlist.

Any ideas?

future.child

@used2berx the 4.4 release of retropie switched to a retroarch port of the atari800 emulator, whis has none of the "enhancements" discussed in this thread to it (aside retroarch integration it's the stock atari800 emulator, and afaik has some issues getting it configured properly).

Downloading the atari800 binary alone won't work unless you also point the runcommand to it (i think it now points to lr-atari800 or something like that).

As i said before, i ditched this emu, as soon as i learned modding it was a dead end effort, in favor of kat5200 (which has all i need already built-in, like settings per rom-crc, flexible button/axis config, analog support, combo-buttons)

Used2BeRX

@future-child Yeah.... I'm kind of on a time crunch here and don't have time to re-configure everything on a new emulator. After all the work I did getting everything set up for Atari 5200 to work almost perfectly, I'm going to try to get that setup working again.

Any ideas about where I need to change lr-atari800 to atari800 to get this to work then?

Used2BeRX

kat5200 doesn't work. After looking for BIOS for about a half hour it said "Error Loading BIOS Image". Now when I restart it, it just automatically says that. I can't figure out how to do anything at that point and I have to unplug the Pi.

atari800 doesn't work. As I've said before, it just boots me back to the romlist.

lr-atari800 doesn't work. It loads a blue screen that you can type on, but nothing else happens.

Kind of annoyed that all of these massive changes were done to the Atari5200/800 in 4.4 if there wasn't any good working option that was implemented. I've read that even if you get lr-atari800 it doesn't work well anyhow and everybody seems to be trying to use kat5200 instead.

I guess I'm just going to delete all the 5200 stuff off of my brother's Pi since I don't have time to mess with any of this right now. Shame, since he just recently gave me a legitimate boxed 5200 system with 10 games.

mediamogul

@used2berx

I play 5200 games a lot and the best solution I've found is simply Atari800. It runs the most amount of games and emulates the largest amount of control peripherals which are necessary for certain games. Seeing as how you're under a time crunch, you're probably better off leaving the whole system out, but perhaps when you have some more time I could help you troubleshoot the software exiting. At first blush it sounds like a BIOS issue, but there might be some additional clues in /dev/shm/runcommand.log.

future.child

@used2berx If you still have a working system you could copy the /opt/retropie/emulators/atari800 folder.
The config files /opt/retropie/configs/atari800/atari800.cfgand /opt/retropie/configs/atari5200/atari5200.cfg.
The emulators.cfg files /opt/retropie/configs/atari800/emulators.cfg and /opt/retropie/configs/atari5200/emulators.cfgto your new system.

Otherwise i'd guess you have to install from source.

As for kat5200 freezing on adding the bios, if memory serves it had to do with the database being corrupted or not having proper permissions.

darknior

I've finished my two set Atari 5200 and 7800 some month ago.
And the 2600 with 153 games is done too but i must work on some media to really finish it ... like ever nothing perfect to take and use over the web.

Atari 5200 with 71 games :

Atari 7800 with 48 games :

With many cool homebrews i love and make media.
But i've some problems to configure games fine on my PI, @future-child do you think it's possible for you to work with me ?
We can speak easily on my Youtube videos if you want. I can share you all my medias to save you many time ;)
I can replace French Synopsis by English one, it's on my plan, i want my set was usable by every one in English.

Used2BeRX

@mediamogul Yeah. I was using the atari800 that had the upgraded controls in this thread. If you remember, over a year ago, I made a spreadsheet with all of the control configs for the Atari 5200 games as well as some Atari 800 games.

I reinstalled it using the following commands:
cd /opt/retropie/emulators/atari800/bin/
sudo cp atari800 atari800.original
sudo wget https://github.com/futurechild/atari800-rpi/blob/master/atari800?raw=true -O atari800
sudo chmod +x atari800

I have the 5 Atari BIOS files in the '/home/pi/RetroPie/BIOS/' folder, all the names are good. I did notice that my old setup used atari5200.rom, but the new instructions call for simply 5200.rom.... so I copied and renamed it and I now have both.

@future-child

My pi is tied up the rest of the day making a new nes_gamelist.xml. I'll double check that I have all of those files where they belong. I was pretty thourough. Thanks for the locations though.

EDIT: Yeah.... I just went over what I have on my PC. I copied all of those over as well. Remember... I had a LOT more than just a few config files. I had a few "default" ones, and a lot of games required specific configurations because of the controls. They're all copied over.

Strangely, the old "emulators.cfg" that remembered the choices before no longer remembers them, and makes completely new entries for each game that look very different than the old ones did. The old ones had a very long random number string, similar to arcade games being launched with MAMNE, where these do not.

My configs look good, or at least they are as they were over a year ago.

Could you look at those instructions I posted above to get the emulator and let me know if I need to do something else?

Do we still use the atari5200.py script with it, or was that abandoned at some point?

future.child

@darknior If you have questions i am able to answer i will do so, please pose them in english as my french is rusty at best.

future.child

@used2berx I myself never used the atari5200.py script and as far as i can tell the instructions you have used are correct.
Keep in mind the atari800 binary was compiled for retropie-4.3, i did not test it on 4.4 myself so i can't vouch for it to be working.
As for your emulators.cfg, i guess the random number string is some sort of crc for the rom + path so copying it to another install won't work (?)
Your 5 bios files are noted case exact in your config file ? linux is picky about charecter case.

Is it not easier just to clone the sd-card from you're existing setup ?

Used2BeRX

@future-child said in Atari 5200: New version of Atari800 (Beta): two triggers (Moon Patrol!!!), hat start and exit buttons:

@used2berx I myself never used the atari5200.py script and as far as i can tell the instructions you have used are correct.

I thought that might be the case. I had old 5200 instructions lying around. I actually had old instructions for downloading the old atari800 build in there too right next to the atari5200.py script. Only at the end did I find the one for your build... so I assumed that the .py script wasn't being used anymore.

Keep in mind the atari800 binary was compiled for retropie-4.3, i did not test it on 4.4 myself so i can't vouch for it to be working.

Bummer. I wonder why it would stop working? @mediamogul says he uses atari800. I'd think he'd at least be using your build that has all of those sweet upgrades for the controls instead of the standard one.

As for your emulators.cfg, i guess the random number string is some sort of crc for the rom + path so copying it to another install won't work (?)[/quote]

Well the new install has everything the same as far as the exact same roms/crc values and rom paths. I don't see why that wouldn't work. Here's an example of what I'm talking about though...

My original entry for Centipede:

af3162bdecbe06ab968cd407f271622b7 = "Centipede"

The entry it made today (completely ignoring that one):

[To be posted] Oops... I thought I had saved that on my PC, but I only have the old one. That one is on the new Pi, but I'm in the middle of a gamelist.xml process I can't break on the old Pi, and I only have one set of plugs, so I can't use both of them at the same time.

This should be pretty moot though. If for some reason the old entries that it made on launch didn't work, the new ones should if everything was working right. I think looking deeper into this isn't the way to go, at least until I'm able to figure out why I can't even successfully launch a single game in any of the 3 emulators.

Your 5 bios files are noted case exact in your config file ? linux is picky about charecter case.

I'll double check when I can, but as I said before, all the roms/configs/BIOS are in the exact same state as they were on the old build.

Is it not easier just to clone the sd-card from you're existing setup ?

lol... sure it would be. But then I wouldn't have any of the potential upgrades between the 4.2 version I was using and the current 4.4 version.

I've already discovered that somebody finally got around to fixing the issue where the first game or folder in a sub-folder displays all of the artwork and info automatically without having to scroll to the next one first. That was a huge annoyance to me and now it's fixed. Going to be hard for me to go back to 4.2 again after seeing that.

I knew I wasn't looking forward to figuring out the Atari 5200 stuff again, but I didn't realize that somebody broke it all on me with the upgrade. This isn't the first time I carried everything over from one pi to the next, but last time I had it all figured out in about 2 hours.

darknior

@future-child lol yes for sure, i know i always speak in english like i can ;)
Atari 7800 are working fine if i remember, because it use LR.
Atari 2600 too, the problem was always with Atari 800 and 5200.
The emulator kat5200 is really better, but it is long and fastidious to configure all the games one by one ... maybe if you have made some of them we can trade configuration file lol
I give all my Media, i release them for every one.

Like i'm working on so many systems at same time ... it will really help me.
If you can't i will stand a little to find time to understand and do it myself.

I forgot to post my Atai 800 already done too :)
With a ton of work on Media ... so many different cover size ... no videos, i must record all of them, and create Logos.
70 games available. I'm always open to add some other cool games i miss ;)

Used2BeRX

@darknior When I'm not in a rush, I may take the time to re-do all the configs in kat5200 if it's really better. But I'd have to be reasonably sure that RetroPie upgrades in the future weren't going to break my work. It took me a month to make everything work on atari800 back when I did work on it.

darknior

@used2berx If you can do it it will be really excellent :)
Like i already tell you, we can work together.

All the work you will do will never be lost because we can take the emulator source code and compile it on the new Retropie 4.4
For my part i don't change my Retropie for the moment, i stand that all was 100% stable and compatible.
Because i must recompile my OpenBOR, Amiga, Solarus and some others ...